Robert Weih
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Robert Weih has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Sven Höfling
Technische Physik, University of Würzburg, Würzburg 97074, Germany
6 shared publications - Fabian Hartmann
Julius-Maximilians-Universität Würzburg
5 shared publications - Josephine Nauschütz
Nanoplus Nanosystems and Technologies GmbH 2 , Gerbrunn
5 shared publications - Andreas Bader
Julius-Maximilians-Universität Würzburg, Physikalisches Institut, Lehrstuhl für Technische Physik 1 , Am Hubland, 97074 Würzburg, Germany
4 shared publications - Benedikt Schwarz
TU Wien
4 shared publications - Rolf Szedlak
Institute of Solid State Electronics , TU Wien
4 shared publications
Latest Publications
- Open Access
- 1 May 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (5)
High-resolution 3D-printed reflective micro-collimators for facet-emitting mid-infrared lasers
Highly divergent and asymmetric beam profiles are an inherent limitation of facet-emitting mid-infrared semiconductor lasers and complicate their use in free-space optical systems. In this work, we demonstrate beam collimation of a facet-emitting interband cascade laser using a gold-coated parabolic mirror fabricated by high-resolution two-photon lithography. A three-dimensional adaptive resolution printing strategy with dynamically adjusted voxel size for shorter print times is employed. The additively manufactured mirror is externally coupled to the laser and redirects the emitted beam by 90°, transforming the strongly divergent facet emission into a collimated free-space beam without modifying the laser cavity. Beam profiles are characterized experimentally over a propagation distance of up to 32 cm and show a substantial reduction in divergence compared to the uncollimated emission. Wave-optical simulations performed in Ansys Zemax OpticStudio reproduce the measured beam evolution and provide insight into the influence of finite mirror geometry and modal asymmetry. The results demonstrate the potential of 3D-printed reflective micro-optics as flexible beam-shaping elements for mid-infrared laser sources and highlight a pathway toward integrated, alignment-free optical systems.
- 1 May 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (5)
Open AccessHigh-resolution 3D-printed reflective micro-collimators for facet-emitting mid-infrared lasers
Highly divergent and asymmetric beam profiles are an inherent limitation of facet-emitting mid-infrared semiconductor lasers and complicate their use in free-space optical systems. In this work, we demonstrate beam collimation of a facet-emitting interband cascade laser using a gold-coated parabolic mirror fabricated by high-resolution two-photon lithography. A three-dimensional adaptive resolution printing strategy with dynamically adjusted voxel size for shorter print times is employed. The additively manufactured mirror is externally coupled to the laser and redirects the emitted beam by 90°, transforming the strongly divergent facet emission into a collimated free-space beam without modifying the laser cavity. Beam profiles are characterized experimentally over a propagation distance of up to 32 cm and show a substantial reduction in divergence compared to the uncollimated emission. Wave-optical simulations performed in Ansys Zemax OpticStudio reproduce the measured beam evolution and provide insight into the influence of finite mirror geometry and modal asymmetry. The results demonstrate the potential of 3D-printed reflective micro-optics as flexible beam-shaping elements for mid-infrared laser sources and highlight a pathway toward integrated, alignment-free optical systems.
- Open Access
- 2 April 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 25 (4)
Electron-to-photon noise transfer in midinfrared semiconductor lasers
Noise characteristics of state-of-the art light sources are crucial parameters in understanding their limitations regarding quantum applications. This work describes a method to study the electrical noise transfer of current driver sources to the intensity noise of midinfrared emission by commercial quantum and interband cascade lasers (QCLs and ICLs, respectively). A current driver with sub-shot-electrical-noise in a specific frequency range (up to 10 dB below the shot-noise level) was developed for this purpose. This enables testing of the performance of midinfrared lasers when they are driven via such a quiet pump source. By using this current driver, we identify the fundamental noise of a QCL and an ICL, which is the laser intensity noise resulting solely from the internal dynamics of the laser under test. The proposed method allows us to retrieve the noise transfer function from current to light, showing that the main limitations in observing the quantum properties of the emitted photons come from laser excess noise and poor matching between the laser and the detection system in terms of bandwidth and optical power. From the analysis of the measured parameters, we highlight current technological limitations and suggest which key features should be optimized in midinfrared systems for matching the performance required by quantum applications.
- 2 April 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 25 (4)
Open AccessElectron-to-photon noise transfer in midinfrared semiconductor lasers
Noise characteristics of state-of-the art light sources are crucial parameters in understanding their limitations regarding quantum applications. This work describes a method to study the electrical noise transfer of current driver sources to the intensity noise of midinfrared emission by commercial quantum and interband cascade lasers (QCLs and ICLs, respectively). A current driver with sub-shot-electrical-noise in a specific frequency range (up to 10 dB below the shot-noise level) was developed for this purpose. This enables testing of the performance of midinfrared lasers when they are driven via such a quiet pump source. By using this current driver, we identify the fundamental noise of a QCL and an ICL, which is the laser intensity noise resulting solely from the internal dynamics of the laser under test. The proposed method allows us to retrieve the noise transfer function from current to light, showing that the main limitations in observing the quantum properties of the emitted photons come from laser excess noise and poor matching between the laser and the detection system in terms of bandwidth and optical power. From the analysis of the measured parameters, we highlight current technological limitations and suggest which key features should be optimized in midinfrared systems for matching the performance required by quantum applications.
- Open Access
- 9 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (10)
Impact of carrier injector design on the threshold of interband cascade lasers
We theoretically investigate how the injector region design of interband cascade lasers (ICLs) impacts the threshold carrier and current densities. The model combines a polarization-sensitive 8-band k⋅p calculation, electrostatics, and a microscopic calculation of Auger recombination rates. The inelastic carrier–carrier scattering is included at the lowest order using quasi-equilibrium Green’s functions. Our approach captures the combined effects of charge-carrier redistribution, parasitic absorption, and bias voltage on the Auger recombination rate. We show that heavily doping the electron injector suppresses the dominant multi-hole Auger recombination by reducing the hole population of the recombination quantum wells. This agrees with the experimental observation that the heavy doping reduces threshold currents. Unlike the measurements, however, they do not increase at high doping concentrations in our model, which does not include scattering-mediated carrier escape and/or light absorption. Furthermore, by introducing indium to the conventional GaSb hole injector wells, we explain the rule of thumb from experiments that raising the hole injector levels does not outperform the doping strategy. Our model provides physical insights for optimizing ICL carrier injectors.
- 9 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (10)
Open AccessImpact of carrier injector design on the threshold of interband cascade lasers
We theoretically investigate how the injector region design of interband cascade lasers (ICLs) impacts the threshold carrier and current densities. The model combines a polarization-sensitive 8-band k⋅p calculation, electrostatics, and a microscopic calculation of Auger recombination rates. The inelastic carrier–carrier scattering is included at the lowest order using quasi-equilibrium Green’s functions. Our approach captures the combined effects of charge-carrier redistribution, parasitic absorption, and bias voltage on the Auger recombination rate. We show that heavily doping the electron injector suppresses the dominant multi-hole Auger recombination by reducing the hole population of the recombination quantum wells. This agrees with the experimental observation that the heavy doping reduces threshold currents. Unlike the measurements, however, they do not increase at high doping concentrations in our model, which does not include scattering-mediated carrier escape and/or light absorption. Furthermore, by introducing indium to the conventional GaSb hole injector wells, we explain the rule of thumb from experiments that raising the hole injector levels does not outperform the doping strategy. Our model provides physical insights for optimizing ICL carrier injectors.
- Open Access
- 30 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (26)
Interband cascade devices with switchable laser and superluminescence mode
Superluminescent diodes are usually hard to fabricate and cannot switch to lasing operation. We demonstrate a practical approach for creating devices that can function as a laser as well as a superluminescent diode. The operation mode is controlled by a distinct contact that enables electrical switching between those modes. For the demonstration of this principle, we fabricated devices based on interband cascade gain media. The devices showed superluminescent power of up to 200 μW. The electrically switchable operation combines the good alignment capabilities of a laser with the broadband, low coherence properties of a superluminescent diode.
- 30 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (26)
Open AccessInterband cascade devices with switchable laser and superluminescence mode
Superluminescent diodes are usually hard to fabricate and cannot switch to lasing operation. We demonstrate a practical approach for creating devices that can function as a laser as well as a superluminescent diode. The operation mode is controlled by a distinct contact that enables electrical switching between those modes. For the demonstration of this principle, we fabricated devices based on interband cascade gain media. The devices showed superluminescent power of up to 200 μW. The electrically switchable operation combines the good alignment capabilities of a laser with the broadband, low coherence properties of a superluminescent diode.
- Open Access
- 9 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (24)
Direct measurement of current-dependent optical losses in interband cascade lasers
Interband cascade lasers (ICLs) are becoming increasingly valuable in mid-infrared applications due to their low power consumption and compatibility with silicon photonic integration, particularly for trace gas sensing. ICLs have demonstrated room-temperature continuous-wave operation in the 3–6 μm range, with excellent performance around 3.3 μm. A key factor limiting ICL performance at longer wavelengths is optical loss, i.e., caused by the intervalence band transitions. These losses increase with hole concentration in the active region, leading to a pronounced current-dependence of the optical losses in ICLs. Conventional methods that infer optical losses from length-dependent variations in parameters such as slope efficiency or threshold current require the assumption of constant optical loss. In this study, we present a direct optical transmission measurement technique to determine waveguide losses. Our experiments confirm strongly increasing waveguide losses with current density, directly impacting the quantum efficiency of ICLs. This approach offers a precise evaluation of optical losses and bears a functional alternative compared to traditional methods, addressing the limitations of assuming constant losses and providing enhanced insight into ICL performance across various wavelengths.
- 9 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (24)
Open AccessDirect measurement of current-dependent optical losses in interband cascade lasers
Interband cascade lasers (ICLs) are becoming increasingly valuable in mid-infrared applications due to their low power consumption and compatibility with silicon photonic integration, particularly for trace gas sensing. ICLs have demonstrated room-temperature continuous-wave operation in the 3–6 μm range, with excellent performance around 3.3 μm. A key factor limiting ICL performance at longer wavelengths is optical loss, i.e., caused by the intervalence band transitions. These losses increase with hole concentration in the active region, leading to a pronounced current-dependence of the optical losses in ICLs. Conventional methods that infer optical losses from length-dependent variations in parameters such as slope efficiency or threshold current require the assumption of constant optical loss. In this study, we present a direct optical transmission measurement technique to determine waveguide losses. Our experiments confirm strongly increasing waveguide losses with current density, directly impacting the quantum efficiency of ICLs. This approach offers a precise evaluation of optical losses and bears a functional alternative compared to traditional methods, addressing the limitations of assuming constant losses and providing enhanced insight into ICL performance across various wavelengths.
- Open Access
- 1 December 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (12)
Portable tunable interband cascade laser spectrometer using thin-film waveguides for food contaminant analysis
Interband cascade lasers (ICL) are high output power mid-infrared light sources with low power consumption, serving as a viable alternative to more commonly applied quantum cascade lasers. The integration of ICLs with thin-film waveguides facilitates miniaturized sensing platforms based on the principles of evanescent field absorption toward tailorable high-fidelity portable mid-infrared (MIR) sensing solutions for on-site chemical analysis. The analytical performance of a MIR sensing system is presented combining a tunable interband cascade laser emitting at a wavelength range of 5.88–6.09 µm (1702–1641 cm−1) with a 6 µm GaAs/AlGaAs thin-film waveguide as the active transducer for customized evanescent field absorption analysis of food contaminants. A comparison of the analytical performance of the developed tICL-based system vs conventional Fourier-transform infrared spectroscopy is presented for the exemplary analysis of the Fusarium mycotoxin deoxynivalenol, a persistent food contaminant resulting from fungal infection. The thin-film waveguide enhances the sensitivity compared to conventional attenuated total reflection systems, revealing improved detection limits. The compact design of the system, along with the favorable analytical figures-of-merit and automated data processing, confirm the potential of the developed tICL-based spectrometer for on-site detection of food contaminants at various stages along the food supply chain.
- 1 December 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (12)
Open AccessPortable tunable interband cascade laser spectrometer using thin-film waveguides for food contaminant analysis
Interband cascade lasers (ICL) are high output power mid-infrared light sources with low power consumption, serving as a viable alternative to more commonly applied quantum cascade lasers. The integration of ICLs with thin-film waveguides facilitates miniaturized sensing platforms based on the principles of evanescent field absorption toward tailorable high-fidelity portable mid-infrared (MIR) sensing solutions for on-site chemical analysis. The analytical performance of a MIR sensing system is presented combining a tunable interband cascade laser emitting at a wavelength range of 5.88–6.09 µm (1702–1641 cm−1) with a 6 µm GaAs/AlGaAs thin-film waveguide as the active transducer for customized evanescent field absorption analysis of food contaminants. A comparison of the analytical performance of the developed tICL-based system vs conventional Fourier-transform infrared spectroscopy is presented for the exemplary analysis of the Fusarium mycotoxin deoxynivalenol, a persistent food contaminant resulting from fungal infection. The thin-film waveguide enhances the sensitivity compared to conventional attenuated total reflection systems, revealing improved detection limits. The compact design of the system, along with the favorable analytical figures-of-merit and automated data processing, confirm the potential of the developed tICL-based spectrometer for on-site detection of food contaminants at various stages along the food supply chain.
- Open Access
- 1 October 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (10)
Compact vertical emitting ring interband cascade lasers for isotope-resolved CO2 sensing
We present a compact vertically emitting ring interband cascade laser (ICL) with low power consumption and the possibility for seamless integration into various CO2 sensing applications. Our devices exhibit desirable performance characteristics in battery-driven handheld devices, including room temperature (20 °C) threshold currents as low as 15 mA, small footprints, and stable single-mode emission, suitable for rapid isotope-resolved CO2 detection. Through epi-down bonding with sub-micron accuracy, we achieved robust integration of substrate-emitting ring ICLs, ensuring reliability and scalability that would be required for mass production. We present comprehensive experimental results validating the efficacy of our approach, including spectral analysis and CO2 sensing capabilities with limits of detection of 24 and 13 ppmv utilizing the 12CO2 P(60) and 13CO2 R(10) transitions in the ν3 fundamental band, respectively. The demonstrated devices hold great promise for a wide range of industrial applications, including environmental monitoring, process control, and atmospheric research, where compact low-power sensors are essential.
- 1 October 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (10)
Open AccessCompact vertical emitting ring interband cascade lasers for isotope-resolved CO2 sensing
We present a compact vertically emitting ring interband cascade laser (ICL) with low power consumption and the possibility for seamless integration into various CO2 sensing applications. Our devices exhibit desirable performance characteristics in battery-driven handheld devices, including room temperature (20 °C) threshold currents as low as 15 mA, small footprints, and stable single-mode emission, suitable for rapid isotope-resolved CO2 detection. Through epi-down bonding with sub-micron accuracy, we achieved robust integration of substrate-emitting ring ICLs, ensuring reliability and scalability that would be required for mass production. We present comprehensive experimental results validating the efficacy of our approach, including spectral analysis and CO2 sensing capabilities with limits of detection of 24 and 13 ppmv utilizing the 12CO2 P(60) and 13CO2 R(10) transitions in the ν3 fundamental band, respectively. The demonstrated devices hold great promise for a wide range of industrial applications, including environmental monitoring, process control, and atmospheric research, where compact low-power sensors are essential.
- Open Access
- 1 August 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (8)
Miniaturizing gas sensors combining mid-infrared interband cascade light emitting diodes with substrate-integrated hollow waveguides
In this study, we report a compact and versatile gas sensor system combining mid-infrared interband cascade light emitting diodes (MIR-ICLEDs) with substrate-integrated hollow waveguides (iHWGs) toward miniaturized gas sensors. Two readily exchangeable MIR-ICLEDs with center emission wavelengths of 3.4 µm (2941 cm−1) and 5.7 µm (1754 cm−1), respectively, were integrated into a modular sensor system using the iHWG simultaneously as a miniaturized gas cell. The performance of the sensor system for quantitative analysis was evaluated based on calibration functions established for four analytes (i.e., methane, isobutane, acetone, and acetaldehyde) within the respective spectral regions. The utility of such a sensor system as a non-dispersive infrared sensor was tested for various scenarios, including the application of spectral filters, the performance of the individual ICLEDs, and in the analysis of gas mixtures. Furthermore, we demonstrated that the modularity of the sensor design facilitates flexible adaptation to target gas species and available sample volumes, differentiating individual components within gas mixtures.
- 1 August 2024
- Published by AIP Publishing in AIP Advances
- Vol. 14 (8)
Open AccessMiniaturizing gas sensors combining mid-infrared interband cascade light emitting diodes with substrate-integrated hollow waveguides
In this study, we report a compact and versatile gas sensor system combining mid-infrared interband cascade light emitting diodes (MIR-ICLEDs) with substrate-integrated hollow waveguides (iHWGs) toward miniaturized gas sensors. Two readily exchangeable MIR-ICLEDs with center emission wavelengths of 3.4 µm (2941 cm−1) and 5.7 µm (1754 cm−1), respectively, were integrated into a modular sensor system using the iHWG simultaneously as a miniaturized gas cell. The performance of the sensor system for quantitative analysis was evaluated based on calibration functions established for four analytes (i.e., methane, isobutane, acetone, and acetaldehyde) within the respective spectral regions. The utility of such a sensor system as a non-dispersive infrared sensor was tested for various scenarios, including the application of spectral filters, the performance of the individual ICLEDs, and in the analysis of gas mixtures. Furthermore, we demonstrated that the modularity of the sensor design facilitates flexible adaptation to target gas species and available sample volumes, differentiating individual components within gas mixtures.
- 11 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
5.0 μm emitting interband cascade lasers with superlattice and bulk AlGaAsSb claddings
We present a comparison between interband cascade lasers (ICLs) with a six-stage active region emitting at 5 μm with AlSb/InAs superlattice claddings and with bulk Al0.85Ga0.15As0.07Sb0.93 claddings. Utilizing bulk AlGaAsSb claddings with their lower refractive index compared to the more commonly used AlSb/InAs superlattice claddings, the mode-confinement in the active region increases by 14.4% resulting in an improvement of the lasing threshold current density. For broad area laser and under pulsed excitation, the ICL with AlGaAsSb claddings shows a lower threshold current density of Jth=396A/cm2 compared to Jth=521A/cm2 of the ICL with superlattice claddings. Additionally, a higher characteristic temperature was obtained for the ICL with bulk claddings. Emission in pulsed operation is observed up to 65 °C.
- 11 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
5.0 μm emitting interband cascade lasers with superlattice and bulk AlGaAsSb claddings
We present a comparison between interband cascade lasers (ICLs) with a six-stage active region emitting at 5 μm with AlSb/InAs superlattice claddings and with bulk Al0.85Ga0.15As0.07Sb0.93 claddings. Utilizing bulk AlGaAsSb claddings with their lower refractive index compared to the more commonly used AlSb/InAs superlattice claddings, the mode-confinement in the active region increases by 14.4% resulting in an improvement of the lasing threshold current density. For broad area laser and under pulsed excitation, the ICL with AlGaAsSb claddings shows a lower threshold current density of Jth=396A/cm2 compared to Jth=521A/cm2 of the ICL with superlattice claddings. Additionally, a higher characteristic temperature was obtained for the ICL with bulk claddings. Emission in pulsed operation is observed up to 65 °C.
- 10 June 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (24)
GaSb-based interband cascade laser with hybrid superlattice plasmon-enhanced claddings
We present an interband cascade laser (ICL) emitting at 5.2 µm consisting of an 8-stage active region and a hybrid cladding composed of outer plasmon-enhanced InAs0.915Sb0.085 and inner InAs/AlSb superlattice claddings. The hybrid cladding architecture shows an increase in mode confinement in the active region by 11.2% according to the simulation. This is a consequence of a significantly lower refractive index of plasmon-enhanced claddings. The threshold current density is 242 A/cm2 in pulsed operation at room temperature. This is the lowest value reported to date for ICLs emitting at wavelengths longer than 5 µm. We also report close to record value threshold power density of 840 W/cm2 for ICLs at such wavelengths.
- 10 June 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (24)
GaSb-based interband cascade laser with hybrid superlattice plasmon-enhanced claddings
We present an interband cascade laser (ICL) emitting at 5.2 µm consisting of an 8-stage active region and a hybrid cladding composed of outer plasmon-enhanced InAs0.915Sb0.085 and inner InAs/AlSb superlattice claddings. The hybrid cladding architecture shows an increase in mode confinement in the active region by 11.2% according to the simulation. This is a consequence of a significantly lower refractive index of plasmon-enhanced claddings. The threshold current density is 242 A/cm2 in pulsed operation at room temperature. This is the lowest value reported to date for ICLs emitting at wavelengths longer than 5 µm. We also report close to record value threshold power density of 840 W/cm2 for ICLs at such wavelengths.