Josephine Nauschütz
Josephine Nauschütz has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Robert Weih
Nanoplus Advanced Photonics Gerbrunn GmbH 2 , Oberer Kirschberg 4, 97218 Gerbrunn, Germany
5 shared publications - Benedikt Schwarz
TU Wien
3 shared publications - Johannes Fuchsberger
Institute of Solid State Electronics , TU Wien
3 shared publications - Rolf Szedlak
Institute of Solid State Electronics , TU Wien
3 shared publications - Andreas Bader
Julius-Maximilians-Universität Würzburg, Physikalisches Institut, Lehrstuhl für Technische Physik 1 , Am Hubland, 97074 Würzburg, Germany
2 shared publications - Andreas Windischhofer
Institute of Solid State Electronics, TU Wien 1 , Vienna
2 shared publications
Latest Publications
- Open Access
- 1 May 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (5)
High-resolution 3D-printed reflective micro-collimators for facet-emitting mid-infrared lasers
Highly divergent and asymmetric beam profiles are an inherent limitation of facet-emitting mid-infrared semiconductor lasers and complicate their use in free-space optical systems. In this work, we demonstrate beam collimation of a facet-emitting interband cascade laser using a gold-coated parabolic mirror fabricated by high-resolution two-photon lithography. A three-dimensional adaptive resolution printing strategy with dynamically adjusted voxel size for shorter print times is employed. The additively manufactured mirror is externally coupled to the laser and redirects the emitted beam by 90°, transforming the strongly divergent facet emission into a collimated free-space beam without modifying the laser cavity. Beam profiles are characterized experimentally over a propagation distance of up to 32 cm and show a substantial reduction in divergence compared to the uncollimated emission. Wave-optical simulations performed in Ansys Zemax OpticStudio reproduce the measured beam evolution and provide insight into the influence of finite mirror geometry and modal asymmetry. The results demonstrate the potential of 3D-printed reflective micro-optics as flexible beam-shaping elements for mid-infrared laser sources and highlight a pathway toward integrated, alignment-free optical systems.
- 1 May 2026
- Published by AIP Publishing in APL Photonics
- Vol. 11 (5)
Open AccessHigh-resolution 3D-printed reflective micro-collimators for facet-emitting mid-infrared lasers
Highly divergent and asymmetric beam profiles are an inherent limitation of facet-emitting mid-infrared semiconductor lasers and complicate their use in free-space optical systems. In this work, we demonstrate beam collimation of a facet-emitting interband cascade laser using a gold-coated parabolic mirror fabricated by high-resolution two-photon lithography. A three-dimensional adaptive resolution printing strategy with dynamically adjusted voxel size for shorter print times is employed. The additively manufactured mirror is externally coupled to the laser and redirects the emitted beam by 90°, transforming the strongly divergent facet emission into a collimated free-space beam without modifying the laser cavity. Beam profiles are characterized experimentally over a propagation distance of up to 32 cm and show a substantial reduction in divergence compared to the uncollimated emission. Wave-optical simulations performed in Ansys Zemax OpticStudio reproduce the measured beam evolution and provide insight into the influence of finite mirror geometry and modal asymmetry. The results demonstrate the potential of 3D-printed reflective micro-optics as flexible beam-shaping elements for mid-infrared laser sources and highlight a pathway toward integrated, alignment-free optical systems.
- Open Access
- 30 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (26)
Interband cascade devices with switchable laser and superluminescence mode
Superluminescent diodes are usually hard to fabricate and cannot switch to lasing operation. We demonstrate a practical approach for creating devices that can function as a laser as well as a superluminescent diode. The operation mode is controlled by a distinct contact that enables electrical switching between those modes. For the demonstration of this principle, we fabricated devices based on interband cascade gain media. The devices showed superluminescent power of up to 200 μW. The electrically switchable operation combines the good alignment capabilities of a laser with the broadband, low coherence properties of a superluminescent diode.
- 30 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (26)
Open AccessInterband cascade devices with switchable laser and superluminescence mode
Superluminescent diodes are usually hard to fabricate and cannot switch to lasing operation. We demonstrate a practical approach for creating devices that can function as a laser as well as a superluminescent diode. The operation mode is controlled by a distinct contact that enables electrical switching between those modes. For the demonstration of this principle, we fabricated devices based on interband cascade gain media. The devices showed superluminescent power of up to 200 μW. The electrically switchable operation combines the good alignment capabilities of a laser with the broadband, low coherence properties of a superluminescent diode.
- Open Access
Greenhouse Gases Detection Exploiting a Multi-Wavelength Interband Cascade Laser Source in a Quartz-Enhanced Photoacoustic Sensor
This study presents the performance of a multi-gas sensor for greenhouse detection based on quartz-enhanced photoacoustic spectroscopy (QEPAS). The QEPAS sensor exploits an innovative, compact three-wavelength laser module as excitation source. The module integrates three interband cascade laser chips with a beam combining system, all enclosed in a compact metallic package with sizes of 40 × 52 × 17 mm to generate a single output beam. The multi-gas QEPAS sensor was tested in a laboratory environment for the sequential detection of two greenhouse gases, methane (CH4) and carbon dioxide (CO2), and a precursor greenhouse gas, carbon monoxide (CO). At an integration time of 100 ms, minimum detection limits of 21 ppb, 363 ppb, and 156 ppb, were estimated for CH4, CO2, and CO detection, respectively, all well below their natural abundance in air.
Open AccessGreenhouse Gases Detection Exploiting a Multi-Wavelength Interband Cascade Laser Source in a Quartz-Enhanced Photoacoustic Sensor
This study presents the performance of a multi-gas sensor for greenhouse detection based on quartz-enhanced photoacoustic spectroscopy (QEPAS). The QEPAS sensor exploits an innovative, compact three-wavelength laser module as excitation source. The module integrates three interband cascade laser chips with a beam combining system, all enclosed in a compact metallic package with sizes of 40 × 52 × 17 mm to generate a single output beam. The multi-gas QEPAS sensor was tested in a laboratory environment for the sequential detection of two greenhouse gases, methane (CH4) and carbon dioxide (CO2), and a precursor greenhouse gas, carbon monoxide (CO). At an integration time of 100 ms, minimum detection limits of 21 ppb, 363 ppb, and 156 ppb, were estimated for CH4, CO2, and CO detection, respectively, all well below their natural abundance in air.
- Open Access
- 9 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (24)
Direct measurement of current-dependent optical losses in interband cascade lasers
Interband cascade lasers (ICLs) are becoming increasingly valuable in mid-infrared applications due to their low power consumption and compatibility with silicon photonic integration, particularly for trace gas sensing. ICLs have demonstrated room-temperature continuous-wave operation in the 3–6 μm range, with excellent performance around 3.3 μm. A key factor limiting ICL performance at longer wavelengths is optical loss, i.e., caused by the intervalence band transitions. These losses increase with hole concentration in the active region, leading to a pronounced current-dependence of the optical losses in ICLs. Conventional methods that infer optical losses from length-dependent variations in parameters such as slope efficiency or threshold current require the assumption of constant optical loss. In this study, we present a direct optical transmission measurement technique to determine waveguide losses. Our experiments confirm strongly increasing waveguide losses with current density, directly impacting the quantum efficiency of ICLs. This approach offers a precise evaluation of optical losses and bears a functional alternative compared to traditional methods, addressing the limitations of assuming constant losses and providing enhanced insight into ICL performance across various wavelengths.
- 9 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (24)
Open AccessDirect measurement of current-dependent optical losses in interband cascade lasers
Interband cascade lasers (ICLs) are becoming increasingly valuable in mid-infrared applications due to their low power consumption and compatibility with silicon photonic integration, particularly for trace gas sensing. ICLs have demonstrated room-temperature continuous-wave operation in the 3–6 μm range, with excellent performance around 3.3 μm. A key factor limiting ICL performance at longer wavelengths is optical loss, i.e., caused by the intervalence band transitions. These losses increase with hole concentration in the active region, leading to a pronounced current-dependence of the optical losses in ICLs. Conventional methods that infer optical losses from length-dependent variations in parameters such as slope efficiency or threshold current require the assumption of constant optical loss. In this study, we present a direct optical transmission measurement technique to determine waveguide losses. Our experiments confirm strongly increasing waveguide losses with current density, directly impacting the quantum efficiency of ICLs. This approach offers a precise evaluation of optical losses and bears a functional alternative compared to traditional methods, addressing the limitations of assuming constant losses and providing enhanced insight into ICL performance across various wavelengths.
- 11 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
5.0 μm emitting interband cascade lasers with superlattice and bulk AlGaAsSb claddings
We present a comparison between interband cascade lasers (ICLs) with a six-stage active region emitting at 5 μm with AlSb/InAs superlattice claddings and with bulk Al0.85Ga0.15As0.07Sb0.93 claddings. Utilizing bulk AlGaAsSb claddings with their lower refractive index compared to the more commonly used AlSb/InAs superlattice claddings, the mode-confinement in the active region increases by 14.4% resulting in an improvement of the lasing threshold current density. For broad area laser and under pulsed excitation, the ICL with AlGaAsSb claddings shows a lower threshold current density of Jth=396A/cm2 compared to Jth=521A/cm2 of the ICL with superlattice claddings. Additionally, a higher characteristic temperature was obtained for the ICL with bulk claddings. Emission in pulsed operation is observed up to 65 °C.
- 11 June 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (4)
5.0 μm emitting interband cascade lasers with superlattice and bulk AlGaAsSb claddings
We present a comparison between interband cascade lasers (ICLs) with a six-stage active region emitting at 5 μm with AlSb/InAs superlattice claddings and with bulk Al0.85Ga0.15As0.07Sb0.93 claddings. Utilizing bulk AlGaAsSb claddings with their lower refractive index compared to the more commonly used AlSb/InAs superlattice claddings, the mode-confinement in the active region increases by 14.4% resulting in an improvement of the lasing threshold current density. For broad area laser and under pulsed excitation, the ICL with AlGaAsSb claddings shows a lower threshold current density of Jth=396A/cm2 compared to Jth=521A/cm2 of the ICL with superlattice claddings. Additionally, a higher characteristic temperature was obtained for the ICL with bulk claddings. Emission in pulsed operation is observed up to 65 °C.
- 10 June 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (24)
GaSb-based interband cascade laser with hybrid superlattice plasmon-enhanced claddings
We present an interband cascade laser (ICL) emitting at 5.2 µm consisting of an 8-stage active region and a hybrid cladding composed of outer plasmon-enhanced InAs0.915Sb0.085 and inner InAs/AlSb superlattice claddings. The hybrid cladding architecture shows an increase in mode confinement in the active region by 11.2% according to the simulation. This is a consequence of a significantly lower refractive index of plasmon-enhanced claddings. The threshold current density is 242 A/cm2 in pulsed operation at room temperature. This is the lowest value reported to date for ICLs emitting at wavelengths longer than 5 µm. We also report close to record value threshold power density of 840 W/cm2 for ICLs at such wavelengths.
- 10 June 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (24)
GaSb-based interband cascade laser with hybrid superlattice plasmon-enhanced claddings
We present an interband cascade laser (ICL) emitting at 5.2 µm consisting of an 8-stage active region and a hybrid cladding composed of outer plasmon-enhanced InAs0.915Sb0.085 and inner InAs/AlSb superlattice claddings. The hybrid cladding architecture shows an increase in mode confinement in the active region by 11.2% according to the simulation. This is a consequence of a significantly lower refractive index of plasmon-enhanced claddings. The threshold current density is 242 A/cm2 in pulsed operation at room temperature. This is the lowest value reported to date for ICLs emitting at wavelengths longer than 5 µm. We also report close to record value threshold power density of 840 W/cm2 for ICLs at such wavelengths.
- Open Access
- 9 October 2023
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 59 (19)
Room temperature operation of single mode GaSb‐based DFB interband cascade lasers beyond 6.1 µm
Single‐mode distributed feedback GaSb‐based interband cascade lasers with record emission beyond 6.1 µm are presented. The results are based on an epitaxial design with reduced resonant intersubband absorption in the valence band and rebalanced internally generated carriers. The epi‐down mounted 8 µm wide and 1 mm long laser chip is operated in continuous wave mode at room temperature and covers a bandwidth of over 20 nm with temperature and current tuning. At 25°C more than 4 mW of optical output power was measured.
- 9 October 2023
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 59 (19)
Open AccessRoom temperature operation of single mode GaSb‐based DFB interband cascade lasers beyond 6.1 µm
Single‐mode distributed feedback GaSb‐based interband cascade lasers with record emission beyond 6.1 µm are presented. The results are based on an epitaxial design with reduced resonant intersubband absorption in the valence band and rebalanced internally generated carriers. The epi‐down mounted 8 µm wide and 1 mm long laser chip is operated in continuous wave mode at room temperature and covers a bandwidth of over 20 nm with temperature and current tuning. At 25°C more than 4 mW of optical output power was measured.
- 1 January 2022
- Published by Optica Publishing Group
- p. ATu4O.5
Interband Cascade Lasers with Optimized Waveguide Design for High Power Operation
Fabry-Pérot interband cascade laser with varied thickness of the separate confinement layers and reduced cladding layer thickness are presented. An epi-side-down mounted device showed a cw-output power of 505mW emitting at λ≈3.3 μm at 10°C.
- 1 January 2022
- Published by Optica Publishing Group
- p. ATu4O.5
Interband Cascade Lasers with Optimized Waveguide Design for High Power Operation
Fabry-Pérot interband cascade laser with varied thickness of the separate confinement layers and reduced cladding layer thickness are presented. An epi-side-down mounted device showed a cw-output power of 505mW emitting at λ≈3.3 μm at 10°C.