KDKara M. Dunmire

Kara M. Dunmire

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kara M. Dunmire has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Growth Performance of Broilers in Response to Increasing Concentration of Multiple Mycotoxins in Contaminated Corn

    by Allison K. Blomme, Khairy I. Jenkins, Kara M. Dunmire, Nelsa M. Beckman, Haley K. Otott, Charles R. Stark, Chad B. Paulk

    Mycotoxins in grains are a result of mold or fungal growth from environmental stressors and cause detrimental impacts to poultry production. Thus, the objective of this experiment was to determine the effects of increasing concentration of a combina­tion of mycotoxins on growth performance of broiler chicks. A total of 250 one-day-old male broilers (Cobb 500; initial BW 0.092 lb) were used in a 15-d study. Broilers were housed in 3 Petersime batteries with ad libitum access to feed and water. Treatments were randomly assigned to 1 of 50 cages within location block, resulting in 10 cages per treatment with 5 broilers per cage balanced by BW. For this experiment, the sourced contaminated corn contained 8.2 ppm fumonisin (FUM), 8.0 ppm deoxynivalenol (DON), and 551 ppb zearalenone (ZEA). Dietary treatments consisted of 0%, 25%, 50%, 75%, and 100% of the mycotoxin contaminated corn replacing non-contaminated corn. The resulting complete diet mycotoxin concentrations were 1.5 ppm, 1.4 ppm, 2.3 ppm, 2.9 ppm, and 3.9 ppm for FUM; < 0.6 ppm, 1.0 ppm, 1.4 ppm, 2.3 ppm, and 3.0 ppm for DON; and < 51.7 ppb, 94.5 ppb, 180.5 ppm, 294.6 ppb, and 364.1 ppb for ZEA, respectively. Data were analyzed as a completely randomized design with cage as the experimental unit using the GLIMMIX procedure of SAS 9.4 (Cary, NC). Results were considered significant at P ≤ 0.05. Total body weight gain (BWG) decreased (linear, P = 0.007) and feed intake (FI) tended to decrease (linear, P = 0.093) in broilers fed diets with increasing concentration of mycotoxin contaminated corn in the diet. The increase in mycotoxin concentration in diets fed to broilers also resulted in poorer (linear, P = 0.010) feed conversion ratio (FCR). In conclusion, increasing concentra­tions of FUM, DON, and ZEA in broiler feed negatively impacted BWG, FI, and FCR even when the mycotoxin levels were below acceptable limits for individual mycotoxins.

  • Open Access

    Effect of the Pelleting Process on Diet Formulations with Varying Levels of Crystalline Amino Acids and Reducing Sugars on Digestibility in Growing Pigs

    by K. M. Dunmire, D. A. Lopez, C. J. Fiehler, C. K. Jones, Y. Li, J. C. Woodworth, R. D. Goodband, M. D. Tokach, C. R. Stark, H. H. Stein, et al.

    The objective of this study was to determine the effect of thermal processing on the digestibility of amino acids (AA) in diets with or without increased concentrations of free amino acids and reducing sugars (RS). To measure AA digestibility, a total of eight individually housed barrows (initially 69.2 ± 6.8 lb) that had a T-cannula installed in the distal ileum were allotted to a replicated 8 × 8 Latin square design with 8 diets and eight 7-d periods. Thus, each pig was fed each diet in one period and no pig received the same diet more than once. Each period lasted 7 days with the initial 5 days being the adaptation period, and ileal digesta was collected for 9 hours on d 6 and 7. Treatments were arranged in a 2 × 2 × 2 factorial with main effects of crystalline AA concentration (low vs. high), reducing sugars (low vs. high), and diet form (mash vs. pellet). There was no feed form × crystalline AA inclusion × RS inclusion interaction for standardized ileal digestible (SID) AA. There was a feed form × RS interaction (P < 0.026) for SID tryptophan. Feeding pelleted high RS diets resulted in decreased SID of tryptophan compared with mash high and low RS diets, and pelleted low RS diets. For the main effects of feed form, the SID of total AA, crude protein (CP), and indispensable AA increased (P < 0.042) in pigs fed pelleted diets compared with those fed mash diets. For the main effects of crystalline AA inclusion, pigs fed low or high crystalline AA inclu­sion had similar SID of total AA and CP. Pigs fed high crystalline AA had increased (P = 0.007) SID of tryptophan compared with those fed low crystalline AA diets. The SID of lysine tended to increase (P = 0.076) in pigs fed high crystalline AA diets compared with those fed low crystalline AA inclusion diets. Pigs fed high crystalline AA had decreased (P = 0.050) SID histidine compared with those fed low crystalline AA diets. The SID of arginine and isoleucine tended to decrease (P < 0.079), in pigs fed high crystalline AA. In pigs fed high crystalline AA, the SID of serine and glycine decreased (P < 0.042) compared with those fed low crystalline AA. For the main effects of RS diets, pigs fed high RS diets had decreased (P < 0.05) SID of total AA,


  • Open Access

    Evaluation of Conditioning Temperature and Die Specifications on Nursery Pig Performance

    by M. B. Braun, K. M. Dunmire, C. E. Evans, C. R. Stark, J. C. Woodworth, C. B. Paulk

    The objective of this study was to determine the effects on growth performance in nursery pigs that is linked to the conditioning temperature and die specifications used during the feed pelleting process. A total of 315 barrows (DNA; 200 × 400; initial BW 13.2 lb) were used in a 35-d growth trial. Upon arrival, pigs were weighed and assigned to pens in a completely randomized design with 5 pigs per pen, and each pen was randomly assigned to 1 of 7 dietary treatments with 9 replications per treatment. Treatments consisted of a mash control (MC) and 6 pelleted diets manufactured using 2 different pellet dies (length/diameter [L:D]: 6.7 and 2.7) and 3 different conditioning temperatures (low, medium, high). Conditioning temperatures for Phase 1 diets pelleted using the 6.7 L:D die were 80, 100, and 120°F and for the die with a L:D 2.7 were 100, 120, and 140°F for the low, medium, and high, respectively. Phase 2 condi­tioning temperatures for diets pelleted using the die with a L:D of 6.7 were approxi­mately 120, 140, and 160°F and for the 2.7 L:D die were 140, 160, and 180°F for the low, medium, and high, respectively. Diets were fed in three phases as follows, Phase 1: d 0 to 10, Phase 2: d 10 to 25, and Phase 3: d 25 to 35. During Phase 3 all pigs were fed a common mash diet. Overall from d 0 to 35, similar ADG was observed for pigs fed the MC or pelleted diets with the exception of the diet pelleted at the low conditioning temperature using the 6.7 L:D die, which had decreased (P < 0.05) ADG compared to MC. When pelleting diets using the 2.7 L:D die, there was a tendency for increased (quadratic, P = 0.077) ADG in pigs fed diets conditioned at increasing temperatures, with the medium temperature having the greatest ADG. There was a tendency for increased (P = 0.088) ADG in pigs fed diets pelleted using the 2.7 L:D die compared to the 6.7 L:D die. Pigs fed pelleted diets, with the exception of the medium temperature on the 2.7 L:D die, had decreased (P < 0.05) ADFI compared to the MC. However, diets pelleted using the 6.7 L:D die as well as the diet manufactured at the medium conditioning temperature on the 2.7 L:D die had improved (P < 0.05) F/G compared to the MC diet. Additionally,


  • Open Access

    Evaluating Soybean Meal Quality Using Near-Infrared Reflectance Spectroscopy

    by K. M. Dunmire, J. Dhakal, K. Stringfellow, C. R. Stark, C. B. Paulk

    The objective of this study was to establish a range of soybean meal quality to evaluate the correlations between official analytical methods and near-infrared reflectance spectroscopy (NIRS). Crushed soybean white flakes (Mark Hershey Farms, Lebanon, PA) exposed to mechanical oil extraction, but not heat processing, were used in this experiment. Ground samples (500 g) were put into cotton bags and autoclaved at 262°F for 0, 5, 10, 15, 30, 45, and 60 min at 29 PSI. This was done to simulate varying degrees of heat processing. A total of 2 samples per treatment were autoclaved in 3 separate blocks. The duplicate samples were divided and analyzed using NIRS and official analytical analysis (wet chemistry). Crude protein (CP), total lysine (Lys), Lys:CP, available Lys, available Lys:total Lys, protein solubility in potassium hydroxide (KOH), trypsin inhibitor activity (TIA), urease activity index (UAI), individual amino acids (AA), and total AA were analyzed to determine the degree of processing using official analytical methods. The correlation coefficient (R) and coefficient determination (r2) between NIRS and official analytical methods were established for CP, total Lys, available/reactive Lys, Lys:CP and available/reactive Lys:total Lys. Data were analyzed using the SAS (v. 9.4, SAS Institute Inc., Cary, NC) GLIMMIX procedure and the CORR procedure to determine the degree of association of NIRS and official analytical analysis. When measured using official analytical methods, CP, total AA, Ala, Asp, Glu, Gly, Iso, Leu, and Val decreased (linear, P < 0.05), whereas available/reactive Lys:total Lys, Lys:CP, available Lys, KOH, trypsin inhibitor, urease, Lys, and Cys decreased (quadratic, P < 0.05) with increasing exposure time to the autoclave. There was a positive correlation between official analytical and NIRS results for CP, Lys:CP, available Lys:total Lys, total AA, Ala, Cys, Lys, and a negative correlation for Thr. A linear model was best fit (P = 0.011, r2 = 0.489) to predict CP using NIRS. A quadratic model was best fit to use NIRS total Lys (P = 0.011, r2 = 0.969), reactive Lys (P = 0.001, r2 = 0.988), and their ratio (P = 0.001, r2 = 0.981) to predict official analytical results. In conclusion, increasing soybean autoclave exposure time decreased soybean meal quality as measured by crude protein, total Lys, Lys:CP, available Lys, available Lys:total Lys, KOH solubility total AA, and additional AA. In addition, regression models were successful at using NIRS for Lys, reactive Lys, Lys:CP, and reactive Lys:total Lys to predict


  • Open Access

    Effects of Grinding Corn with Different Moisture Concentrations on Subsequent Particle Size and Flowability Characteristics

    by M. B. Braun, K. M. Dunmire, C. E. Evans, C. R. Stark, C. B. Paulk

    The objective of this study was to determine the effects of whole corn moisture and hammermill screen size on subsequent ground corn moisture, particle size, and flow- ability. Whole yellow dent #2 corn was used for this experiment. Treatments were arranged as a 2 × 2 factorial design with two moisture concentrations (as-received and high) each ground using 2 hammermill screen sizes (1/8 and 1/4 in). Corn was ground using a laboratory scale 1.5 HP Bliss Hammermill (Model 6K630B) at 3 separate time points to create 3 replications per treatment. Increasing initial whole corn moisture was accomplished by adding 5% water and heating at 55°C for 3 hours in sealed glass jars using a Fisherbrand Isotemp Oven (Model 15-103-051). Ground corn flowability was calculated using angle of repose (AOR), percent compressibility, and critical orifice diameter (COD) measurements to determine the composite flow index (CFI). There was no evidence for a screen size × corn moisture interaction for moisture content, particle size, standard deviation, or flowability metrics. Grinding corn using a 1/8 in screen resulted in decreased (P < 0.041) moisture content compared to corn ground using the 1/4 in screen. There was a decrease in particle size from the 1/4 in screen to the 1/8 in but no evidence of difference was observed for the standard deviation. There was a decrease (P < 0.03) in percent compressibility as screen size increased from 1/8 to 1/4 in. Angle of repose tended to decrease (P < 0 .056) when corn was ground using a 1/4 in screen compared to a 1/8 in screen. For the main effects of moisture content, high moisture corn had increased (P < 0.0001) ground corn moisture content compared to as-received corn. As-received corn resulted in decreased (P < 0.029) particle size and an increased standard deviation compared to the high moisture corn. Increased moisture content of corn increased (P < 0.038) CFI and tended to decrease (P < 0.056) AOR and COD. In conclusion, decreasing hammermill screen size increased moisture loss by 0.55%, corn particle size by 126 μm, and resulted in poorer flowability as measured by percent compressibility and AOR. High moisture corn increased subsequent particle size by 89 μm, therefore improving flowability as measured by CFI.

  • Open Access

    Effects of Conditioning Temperature on Pellet Quality of Nursery Pig Diets

    by G. E. Nichols, C. R. Stark, A. M. Ogles, K. M. Dunmire, C. B. Paulk

    The objective of this experiment was to determine the effect of conditioning temperature on pellet durability index (PDI) and pellet hardness. A phase 1 swine nursery diet was formulated to contain 25% spray-dried whey. The diet was manufactured and pelleted at the Kansas State University O.H. Kruse Feed Technology and Innovation Center, Manhattan, KS. The treatments consisted of three different conditioning temperatures: 130, 145, and 160°F. Diets were steam conditioned (10 in width × 55 in length Wenger twin staff pre-conditioner, Model 150) for approximately 30 sec on a 1-ton 30-horsepower pellet mill (1012-2 HD Master Model, California Pellet Mill) with a 3/16 in × 1 1/4 in pellet die (L:D 6.7). Treatments were pelleted at 3 separate time points to provide 3 replicates per treatment. Samples were collected directly after discharging from the pellet mill and cooled in an experimental counterflow cooler. Samples were analyzed for PDI using the Holmen NHP 100 (TekPro Ltd, Norfolk, UK) in duplicate for each replicate. Pellet hardness was determined by evaluating the peak amount of force applied before the first signs of fracture. Pellets were crushed perpendicular to their longitudinal axis using a texture analyzer. A total of 30 pellets of similar length were selected at random from each replication to be tested and the force needed to crush each pellet was averaged within replication. Although conditioning temperature was increased in a linear fashion, a quadratic increase (P < 0.002) in hot pellet temperature was observed. Increasing conditioning temperature resulted in increased (linear, P < 0.045) PDI and pellet hardness. There was a tendency for a low correlation (P < 0.076, r = 0.618, r2 = 0.382) between pellet hardness and PDI. Overall, increasing the conditioning temperature increased both pellet hardness and pellet durability; however, these two responses were not strongly correlated. Future research and more data need to be generated to determine the relationship between PDI and pellet hardness at varying levels of pellet quality to determine what factors influence this relationship.

  • Open Access

    Effects of Spray-Dried Lactococcus-Based Fermentation Products on Growth Performance of Nursery Pigs

    by K. M. Dunmire, M. B. Braun, G. E. Nichols, C. E. Evans, M. Saensukjaroenphon, C. N. Truelock, J. C. Woodworth, J. Callura, C. B. Paulk

    A total of 720 barrows (initially 13.0 lb; Line 200 × 400; DNA, Columbus, NE) from 2 study groups (360 pigs per study group), were used in a 42-d growth trial to test the effects of spray-dried Lactococcus-based fermentation products on nursery pig performance. There were 24 replications per treatment and 5 pigs per pen. For both experiments, pens of pigs were randomly allotted to 1 of 6 dietary treatments in a completely randomized design. There were six treatment diets fed in 3 phases. The positive control diet included zinc oxide (phase 1), zinc oxide + chlortetracycline (CTC; phase 2) while the negative control diet did not include zinc oxide or CTC. Treatment diets included the negative control + 1 of 4 fermentation products (C, D, E, or F) added at 5% of the diet. Phase 3 diets contained a common control diet fed to all pigs plus treatment diets (C, D, E, and F). Phase 1 and 2 diets were fed in pelleted form and phase 3 in mash form. From d 0 to 20, there was an overall treatment effect (P = 0.001) where pigs fed the positive control had increased (P < 0.05) d 20 weight, average daily gain (ADG), average daily intake (ADFI), and improved feed efficiency (F/G) compared to those fed the negative control and negative control + fermentation product. From d 20 to 42, there was an overall treatment effect (P = 0.003) for F/G where pigs fed the negative control had improved (P < 0.05) F/G compared to those fed additive D, E, and F. Overall, there was a treatment effect (P = 0.03) for pigs fed the positive control having improved (P < 0.05) ADG and F/G compared to the negative control and negative control + fermentation product. In addition, pigs fed the negative control had improved (P < 0.05) F/G compared to those fed additive D, E, and F. In conclusion, pigs fed the positive control (zinc + CTC) diet had improved performance compared to pigs fed the negative control with or without fermentation product.

  • Open Access

    Effect of Dietary Fiber Source on Growth Performance, Carcass Characteristics, and Economic Return of Finishing Pigs

    by K. M. Dunmire, L. L. Thomas, M. B. Braun, C. N. Truelock, M. D. Tokach, J. M. DeRouchey, R. D. Goodband, J. C. Woodworth, S. S. Dritz, C. B. Paulk

    A total of 287 pigs (DNA 600 × 241; initially 111.8 lb) were used in an 86-d experiment to determine the effect of dietary fiber source on finishing pig growth performance and carcass characteristics. There were 12 pens per treatment with 7 or 8 pigs per pen. Pens were randomly assigned to 1 of 3 dietary treatments consisting of a control (8.7% neutral detergent fiber; NDF), 20% dried distillers grains with solubles (DDGS; 13.6% NDF), or 14.5% sugar beet pulp (SBP; 13.6% NDF). Experimental diets were fed from d 0 to 86 in 3 phases; d 0 to 18, d 18 to 39, and d 39 to 86. From d 0 to 86, there was no evidence for treatment difference in ADG or ADFI. Pigs fed DDGS had marginally poorer F/G than the control or 14.5% SBP diets (P < 0.10). Caloric efficiency of net energy (NE) in kcal per lb of live gain was marginally poorer (P < 0.10) in pigs fed DDGS compared to those fed control and SBP. There was a decrease (P < 0.10) in hot carcass weight (HCW) and carcass yield (P < .0.05) in pigs fed DDGS and SBP compared to those fed the control diet. Loin depth marginally decreased (P < 0.10) in pigs fed SBP compared to the control, with those fed DDGS intermediate. Feed cost per pig was greatest (P < 0.05) for pigs fed SBP, followed by DDGS, with those fed the control diet having the least. Feed cost per lb of gain increased (P < 0.05) in pigs fed SBP, followed by DDGS, with those fed the control having the least. Gain value decreased (P < 0.05) in pigs fed SBP compared to the control, with those fed DDGS intermediate. Income over feed cost was poorest (P < 0.05) in pigs fed SBP, followed by DDGS, with those fed the control diet being the greatest. In conclusion, pigs fed DDGS tended to have poorer F/G compared to those fed the control diet or SBP. This can be explained by the overestimation of NE of the diet as demonstrated by an increase in caloric efficiency. Increasing dietary NDF reduced carcass yield and economic return.