Adilet Dossanov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Adilet Dossanov has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Vadim Issakov
Institute for CMOS Design, TU Braunschweig, Brunswick, Germany
4 shared publications - Alexander Meyer
Institute for CMOS Design, TU Braunschweig, Brunswick, Germany
2 shared publications - Andrea Mazzanti
Department of Electrical, Computer and Biomedical Engineering, University of Pavia, Pavia, Italy
1 shared publication - Christian Ziegler
Institute for CMOS Design, Technische Universitt Braunschweig, Brunswick, Germany
1 shared publication - Fabio Padovan
Infineon Technologies Austria AG, Villach, Austria
1 shared publication Guillermo Payá-Vayá
Chair for Chip Design for Embedded Computing, TU Braunschweig, Brunswick, Germany
1 shared publication
Latest Publications
- Open Access
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (6) , 890-893
A Cryo-CMOS Fractional-N PLL in 22 nm FDSOI Operating at 6 K for Trapped-Ion Quantum Computer Applications
This letter presents a fractional-N charge-pump phase-locked loop (CP-PLL) operating at cryogenic temperatures (CT) down to 6 K. The phase-locked loop (PLL), generating signals in the frequency range around 2.28–2.68 GHz, is intended as a reference source in a microwave signal generator for a trapped-ion quantum computer operating with ${}^{{9}}\text {Be}^{\text {+}}$ ions. Using a third-order MASH DSmodulator (DSM), the PLL achieves a highly competitive FoM of −245 dB. The circuit exhibits the highest fractional spur suppression among the recently reported cryogenic PLLs, as well as the lowest chip area.
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (6) , 890-893
Open AccessA Cryo-CMOS Fractional-N PLL in 22 nm FDSOI Operating at 6 K for Trapped-Ion Quantum Computer Applications
This letter presents a fractional-N charge-pump phase-locked loop (CP-PLL) operating at cryogenic temperatures (CT) down to 6 K. The phase-locked loop (PLL), generating signals in the frequency range around 2.28–2.68 GHz, is intended as a reference source in a microwave signal generator for a trapped-ion quantum computer operating with ${}^{{9}}\text {Be}^{\text {+}}$ ions. Using a third-order MASH DSmodulator (DSM), the PLL achieves a highly competitive FoM of −245 dB. The circuit exhibits the highest fractional spur suppression among the recently reported cryogenic PLLs, as well as the lowest chip area.
- Open Access
- 2 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 73 (4) , 418-422
Design of a Tank-Optimized 20 GHz VCO With Fourth Harmonic Extraction Achieving 193.8 dBc/Hz Peak FoM in 22 nm FDSOI
In this brief, we present design considerations on achieving highest figure of merit (FoM) for a class-B LC VCO in CMOS. Following aspects are addressed: a) systematic analysis of choosing the optimal fundamental oscillation frequency $f_{\text {O}}$ for achieving simultaneously low phase noise (PN) and high power efficiency, i.e., highest FoM. We show that the optimal $f_{\text {O}}$ is directly related to the frequency tuning range (FTR). E.g., in the given technology, an FTR of 3% results in an optimal operating range of 10 GHz to 20 GHz. A wider FTR narrows down the operation range for optimal PN and FOM; and b) we present an LC-tank step-by-step dimensioning procedure. The proposed approach is based on iterative electromagnetic (EM)-simulations of the resonant circuit components and optimization with respect to technology-independent design degrees of freedom. The terms $\mathbf {10{\,}\mathrm {\mathbf {log_{10}}}(L/(CR_{\mathrm {T}}))}$ and $\mathbf {20{\,}\mathrm {\mathbf {log_{10}}}(R_{\mathrm {T}}\sqrt {C/L})}$ derived from analytical expressions for PN and FoM are optimized over frequency for various $\mathbf {{C_{\max }}/{C_{\min }}}$ ratios. We use these considerations to design a multi-harmonic class-B LC-VCO in 22 nm FDSOI CMOS, which offers two outputs - one at the fundamental (H1) and another at the fourth harmonic (H4), extracted directly from the core. The VCO achieves a highly competitive FoM at 1 MHz offset with 0.4 V supply of 193.8 dBc/Hz and 188.2 dBc/Hz at 20 GHz and 80 GHz, respectively. We demonstrate that class-B VCO can achieve PN and FoM outperforming class-C or class-F. It is achieved only by means of the proposed systematic LC-tank design, without any additional circuitry, such as waveform shaping, core coupling etc. Thus, core area is only $\mathbf {0.05{\,}\mathrm {\mathbf {mm^{2}}}}$ .
- 2 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 73 (4) , 418-422
Open AccessDesign of a Tank-Optimized 20 GHz VCO With Fourth Harmonic Extraction Achieving 193.8 dBc/Hz Peak FoM in 22 nm FDSOI
In this brief, we present design considerations on achieving highest figure of merit (FoM) for a class-B LC VCO in CMOS. Following aspects are addressed: a) systematic analysis of choosing the optimal fundamental oscillation frequency $f_{\text {O}}$ for achieving simultaneously low phase noise (PN) and high power efficiency, i.e., highest FoM. We show that the optimal $f_{\text {O}}$ is directly related to the frequency tuning range (FTR). E.g., in the given technology, an FTR of 3% results in an optimal operating range of 10 GHz to 20 GHz. A wider FTR narrows down the operation range for optimal PN and FOM; and b) we present an LC-tank step-by-step dimensioning procedure. The proposed approach is based on iterative electromagnetic (EM)-simulations of the resonant circuit components and optimization with respect to technology-independent design degrees of freedom. The terms $\mathbf {10{\,}\mathrm {\mathbf {log_{10}}}(L/(CR_{\mathrm {T}}))}$ and $\mathbf {20{\,}\mathrm {\mathbf {log_{10}}}(R_{\mathrm {T}}\sqrt {C/L})}$ derived from analytical expressions for PN and FoM are optimized over frequency for various $\mathbf {{C_{\max }}/{C_{\min }}}$ ratios. We use these considerations to design a multi-harmonic class-B LC-VCO in 22 nm FDSOI CMOS, which offers two outputs - one at the fundamental (H1) and another at the fourth harmonic (H4), extracted directly from the core. The VCO achieves a highly competitive FoM at 1 MHz offset with 0.4 V supply of 193.8 dBc/Hz and 188.2 dBc/Hz at 20 GHz and 80 GHz, respectively. We demonstrate that class-B VCO can achieve PN and FoM outperforming class-C or class-F. It is achieved only by means of the proposed systematic LC-tank design, without any additional circuitry, such as waveform shaping, core coupling etc. Thus, core area is only $\mathbf {0.05{\,}\mathrm {\mathbf {mm^{2}}}}$ .
- Open Access
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (11) , 2984-2997
An Open-Source NanoController v2 Featuring Microcoded Instruction Set Redefinition in 22-nm FDSOI-CMOS for Autonomous Ultralow-Power SoCs
The realization of autonomous, wearable, and implantable system-on-chip (SoC) for health monitoring applications poses several challenges, such as achieving ultralow size, cost, and power consumption, yet offering sufficient flexibility to reprogram and adapt the autonomously operating SoC during the course of treatment. Commonly, programmability is not considered for ultralow-power (ULP) biomedical SoCs, since a dedicated finite state machine (FSM) fixes the operation sequence, and instruction memory presents significant contributions to silicon area and power consumption. Based on a previously published tiny, programmable microarchitecture, this work proposes the strongly enhanced NanoController v2, for potential use in ultralow-power biomedical SoCs, and integrates it as a prototype chip in a 22-nm FDSOI-CMOS technology. By implementing a novel microcoded control unit and an automated design space exploration framework, which are made available open-source, the instruction set can be freely redefined to exploit application-specific properties. The benefits are increased code compaction, performance gain, and, consequently, decreased power consumption. In an extensive measurement campaign, a glucose sensor control application achieves 13.1% higher performance and 15.6% less code size in the best case, resulting in an extremely low power consumption of 660 nW (9% less than the reference), only by a different instruction set without hardware changes. Compared with other state-of-the-art small programmable microcontrollers, between 38% and 82% smaller code size and between 33% and 77% smaller silicon area and averaged power consumption could be shown. Based on the prototype results, a fully integrated glucose sensor chip will be evaluated in currently ongoing work.
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (11) , 2984-2997
Open AccessAn Open-Source NanoController v2 Featuring Microcoded Instruction Set Redefinition in 22-nm FDSOI-CMOS for Autonomous Ultralow-Power SoCs
The realization of autonomous, wearable, and implantable system-on-chip (SoC) for health monitoring applications poses several challenges, such as achieving ultralow size, cost, and power consumption, yet offering sufficient flexibility to reprogram and adapt the autonomously operating SoC during the course of treatment. Commonly, programmability is not considered for ultralow-power (ULP) biomedical SoCs, since a dedicated finite state machine (FSM) fixes the operation sequence, and instruction memory presents significant contributions to silicon area and power consumption. Based on a previously published tiny, programmable microarchitecture, this work proposes the strongly enhanced NanoController v2, for potential use in ultralow-power biomedical SoCs, and integrates it as a prototype chip in a 22-nm FDSOI-CMOS technology. By implementing a novel microcoded control unit and an automated design space exploration framework, which are made available open-source, the instruction set can be freely redefined to exploit application-specific properties. The benefits are increased code compaction, performance gain, and, consequently, decreased power consumption. In an extensive measurement campaign, a glucose sensor control application achieves 13.1% higher performance and 15.6% less code size in the best case, resulting in an extremely low power consumption of 660 nW (9% less than the reference), only by a different instruction set without hardware changes. Compared with other state-of-the-art small programmable microcontrollers, between 38% and 82% smaller code size and between 33% and 77% smaller silicon area and averaged power consumption could be shown. Based on the prototype results, a fully integrated glucose sensor chip will be evaluated in currently ongoing work.
- 14 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (11) , 4643-4647
Ultra-Low-Power High PSRR Sub-1 V Voltage Reference Circuit in 22 nm FDSOI CMOS
This brief presents an ultra-low-power sub-1V voltage reference circuit using a self-cascode technique to improve power supply rejection ratio (PSRR) for battery-powered applications. The proposed voltage reference circuit has been fabricated in 22 nm fully-depleted silicon-on-insulator (FDSOI) CMOS technology, and it occupies an active area of 0.0104 $\text {mm}^{{2}}$ . The measured average output voltage $\text {V}_{\text {REF}}$ from 12 samples at room temperature is 598 mV with a standard deviation of 0.37%. The $\text {V}_{\text {REF}}$ shows measured average temperature coefficient $\text {TC}_{\text {avg}}$ of 61 $\text {ppm/}^{\circ }\text {C}$ over the temperature range of −40°C to 120°C, line sensitivity of 0.12%/V from 1.2V to 1.8V supply voltages, and measured PSRR of 66 dB at 10 Hz. A total power consumption is 45.6nW from a 1.2V supply voltage.
- 14 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (11) , 4643-4647
Ultra-Low-Power High PSRR Sub-1 V Voltage Reference Circuit in 22 nm FDSOI CMOS
This brief presents an ultra-low-power sub-1V voltage reference circuit using a self-cascode technique to improve power supply rejection ratio (PSRR) for battery-powered applications. The proposed voltage reference circuit has been fabricated in 22 nm fully-depleted silicon-on-insulator (FDSOI) CMOS technology, and it occupies an active area of 0.0104 $\text {mm}^{{2}}$ . The measured average output voltage $\text {V}_{\text {REF}}$ from 12 samples at room temperature is 598 mV with a standard deviation of 0.37%. The $\text {V}_{\text {REF}}$ shows measured average temperature coefficient $\text {TC}_{\text {avg}}$ of 61 $\text {ppm/}^{\circ }\text {C}$ over the temperature range of −40°C to 120°C, line sensitivity of 0.12%/V from 1.2V to 1.8V supply voltages, and measured PSRR of 66 dB at 10 Hz. A total power consumption is 45.6nW from a 1.2V supply voltage.