Alexander Meyer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexander Meyer has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Vadim Issakov
Institute for CMOS Design, TU Braunschweig, Brunswick, Germany
6 shared publications - Benedikt Hampel
National Institute of Standards and Technology 1 , Boulder, Colorado 80305
3 shared publications - Marius Neumann
Institut fr Elektrische Messtechnik und Grundlagen der Elektrotechnik, Technische Universitt Braunschweig, Braunschweig, Germany
3 shared publications - Meinhard Schilling
Institut fr Elektrische Messtechnik und Grundlagen der Elektrotechnik, Technische Universitt Braunschweig, Braunschweig, Germany
3 shared publications - Paul Julius Ritter
Institut fr Elektrische Messtechnik und Grundlagen der Elektrotechnik, Technische Universitt Braunschweig, Braunschweig, Germany
3 shared publications - Adilet Dossanov
Institute for CMOS Design, TU Braunschweig, Brunswick, Germany
2 shared publications
Latest Publications
- Open Access
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (6) , 890-893
A Cryo-CMOS Fractional-N PLL in 22 nm FDSOI Operating at 6 K for Trapped-Ion Quantum Computer Applications
This letter presents a fractional-N charge-pump phase-locked loop (CP-PLL) operating at cryogenic temperatures (CT) down to 6 K. The phase-locked loop (PLL), generating signals in the frequency range around 2.28–2.68 GHz, is intended as a reference source in a microwave signal generator for a trapped-ion quantum computer operating with ${}^{{9}}\text {Be}^{\text {+}}$ ions. Using a third-order MASH DSmodulator (DSM), the PLL achieves a highly competitive FoM of −245 dB. The circuit exhibits the highest fractional spur suppression among the recently reported cryogenic PLLs, as well as the lowest chip area.
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 36 (6) , 890-893
Open AccessA Cryo-CMOS Fractional-N PLL in 22 nm FDSOI Operating at 6 K for Trapped-Ion Quantum Computer Applications
This letter presents a fractional-N charge-pump phase-locked loop (CP-PLL) operating at cryogenic temperatures (CT) down to 6 K. The phase-locked loop (PLL), generating signals in the frequency range around 2.28–2.68 GHz, is intended as a reference source in a microwave signal generator for a trapped-ion quantum computer operating with ${}^{{9}}\text {Be}^{\text {+}}$ ions. Using a third-order MASH DSmodulator (DSM), the PLL achieves a highly competitive FoM of −245 dB. The circuit exhibits the highest fractional spur suppression among the recently reported cryogenic PLLs, as well as the lowest chip area.
- Open Access
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 73 (5) , 528-532
A Cross-Voltage-Domain Instrumentation-Amplifier ESP Unit for Ion Shuttling at 5 K
This work presents a cross-voltage domain instrumentation amplifier (INA) based electrode signal processing (ESP) unit for providing full-scale (FS) voltage ranges in excess of 10V at the electrodes of a trapped-ion quantum computer (TIQC) at cryogenic temperatures (CT). It carries out a systematic comparison between a reference design and the proposed INA approach. While both designs achieve their targeted specifications at room temperature (RT), the reference ESP unit’s linearity and noise performance deteriorates at CT. In contrast, the proposed INA-based ESP unit maintains its linearity and noise performance down to 5 K. Both designs are fabricated in a 130nm BCD technology and are evaluated under identical measurement conditions. Measurement results demonstrate that the proposed INA-based ESP unit greatly improves upon the reference design. At 5K its integrated RMS noise improves from 10.2 mVrms to 0.9 mVrms, while its SFDR improves by 25 dB to 49.9 dB and its power is reduced by about 11mW down to 19.5mW.
- 30 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 73 (5) , 528-532
Open AccessA Cross-Voltage-Domain Instrumentation-Amplifier ESP Unit for Ion Shuttling at 5 K
This work presents a cross-voltage domain instrumentation amplifier (INA) based electrode signal processing (ESP) unit for providing full-scale (FS) voltage ranges in excess of 10V at the electrodes of a trapped-ion quantum computer (TIQC) at cryogenic temperatures (CT). It carries out a systematic comparison between a reference design and the proposed INA approach. While both designs achieve their targeted specifications at room temperature (RT), the reference ESP unit’s linearity and noise performance deteriorates at CT. In contrast, the proposed INA-based ESP unit maintains its linearity and noise performance down to 5 K. Both designs are fabricated in a 130nm BCD technology and are evaluated under identical measurement conditions. Measurement results demonstrate that the proposed INA-based ESP unit greatly improves upon the reference design. At 5K its integrated RMS noise improves from 10.2 mVrms to 0.9 mVrms, while its SFDR improves by 25 dB to 49.9 dB and its power is reduced by about 11mW down to 19.5mW.
- Open Access
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (11) , 2984-2997
An Open-Source NanoController v2 Featuring Microcoded Instruction Set Redefinition in 22-nm FDSOI-CMOS for Autonomous Ultralow-Power SoCs
The realization of autonomous, wearable, and implantable system-on-chip (SoC) for health monitoring applications poses several challenges, such as achieving ultralow size, cost, and power consumption, yet offering sufficient flexibility to reprogram and adapt the autonomously operating SoC during the course of treatment. Commonly, programmability is not considered for ultralow-power (ULP) biomedical SoCs, since a dedicated finite state machine (FSM) fixes the operation sequence, and instruction memory presents significant contributions to silicon area and power consumption. Based on a previously published tiny, programmable microarchitecture, this work proposes the strongly enhanced NanoController v2, for potential use in ultralow-power biomedical SoCs, and integrates it as a prototype chip in a 22-nm FDSOI-CMOS technology. By implementing a novel microcoded control unit and an automated design space exploration framework, which are made available open-source, the instruction set can be freely redefined to exploit application-specific properties. The benefits are increased code compaction, performance gain, and, consequently, decreased power consumption. In an extensive measurement campaign, a glucose sensor control application achieves 13.1% higher performance and 15.6% less code size in the best case, resulting in an extremely low power consumption of 660 nW (9% less than the reference), only by a different instruction set without hardware changes. Compared with other state-of-the-art small programmable microcontrollers, between 38% and 82% smaller code size and between 33% and 77% smaller silicon area and averaged power consumption could be shown. Based on the prototype results, a fully integrated glucose sensor chip will be evaluated in currently ongoing work.
- 18 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (11) , 2984-2997
Open AccessAn Open-Source NanoController v2 Featuring Microcoded Instruction Set Redefinition in 22-nm FDSOI-CMOS for Autonomous Ultralow-Power SoCs
The realization of autonomous, wearable, and implantable system-on-chip (SoC) for health monitoring applications poses several challenges, such as achieving ultralow size, cost, and power consumption, yet offering sufficient flexibility to reprogram and adapt the autonomously operating SoC during the course of treatment. Commonly, programmability is not considered for ultralow-power (ULP) biomedical SoCs, since a dedicated finite state machine (FSM) fixes the operation sequence, and instruction memory presents significant contributions to silicon area and power consumption. Based on a previously published tiny, programmable microarchitecture, this work proposes the strongly enhanced NanoController v2, for potential use in ultralow-power biomedical SoCs, and integrates it as a prototype chip in a 22-nm FDSOI-CMOS technology. By implementing a novel microcoded control unit and an automated design space exploration framework, which are made available open-source, the instruction set can be freely redefined to exploit application-specific properties. The benefits are increased code compaction, performance gain, and, consequently, decreased power consumption. In an extensive measurement campaign, a glucose sensor control application achieves 13.1% higher performance and 15.6% less code size in the best case, resulting in an extremely low power consumption of 660 nW (9% less than the reference), only by a different instruction set without hardware changes. Compared with other state-of-the-art small programmable microcontrollers, between 38% and 82% smaller code size and between 33% and 77% smaller silicon area and averaged power consumption could be shown. Based on the prototype results, a fully integrated glucose sensor chip will be evaluated in currently ongoing work.
- Open Access
- 19 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Cryogenic Evaluation of a Digital-to-Analog Converter for a Trapped-Ion Quantum Computer
This paper presents a Digital-to-Analog Converter (DAC) for shuttling operations in a trapped-ion quantum computer (TIQC) measured at 4.6 K.We provide an extensive analysis and comparison of measured characteristics at room temperature (RT) versus those at cryogenic temperature (CT), particularly focusing on the DAC’s static and dynamic behavior, as well as its noise performance. By making well-conceived analytical design choices, we show that the DAC’s performance at CT can match its performance at RT. This is achieved through sufficient design margins, the selection of suitable components, and the adjustment of biasing voltages. The investigated chip features a 12 bit, resistive R-2R ladder-based DAC, which also comprises an input buffer for the DAC’s reference voltage and a simplistic SPI to read the digital control words. Implemented in Infineon’s 130nm Bipolar-CMOS-DMOS (BCD) technology, the DAC consumes 1.1mW from a 1.5V power supply at RT. Its power consumption increases to around 1.5mW at CT due to necessary biasing adjustments. The DAC’s linearity, characterized by its Differential-Non-Linearity (DNL) and Integral-Non-Linearity (INL) remains almost unchanged across temperatures, aligning with its Spurious-Free Dynamic Range (SFDR). The slew-rate (SR) decreases toward CT compared to RT. While the thermal noise floor also decreases, the low-frequency noise increases at CT. Overall, this leads to a slight decrease in the DAC’s noise performance at 4.6K.
- 19 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Open AccessCryogenic Evaluation of a Digital-to-Analog Converter for a Trapped-Ion Quantum Computer
This paper presents a Digital-to-Analog Converter (DAC) for shuttling operations in a trapped-ion quantum computer (TIQC) measured at 4.6 K.We provide an extensive analysis and comparison of measured characteristics at room temperature (RT) versus those at cryogenic temperature (CT), particularly focusing on the DAC’s static and dynamic behavior, as well as its noise performance. By making well-conceived analytical design choices, we show that the DAC’s performance at CT can match its performance at RT. This is achieved through sufficient design margins, the selection of suitable components, and the adjustment of biasing voltages. The investigated chip features a 12 bit, resistive R-2R ladder-based DAC, which also comprises an input buffer for the DAC’s reference voltage and a simplistic SPI to read the digital control words. Implemented in Infineon’s 130nm Bipolar-CMOS-DMOS (BCD) technology, the DAC consumes 1.1mW from a 1.5V power supply at RT. Its power consumption increases to around 1.5mW at CT due to necessary biasing adjustments. The DAC’s linearity, characterized by its Differential-Non-Linearity (DNL) and Integral-Non-Linearity (INL) remains almost unchanged across temperatures, aligning with its Spurious-Free Dynamic Range (SFDR). The slew-rate (SR) decreases toward CT compared to RT. While the thermal noise floor also decreases, the low-frequency noise increases at CT. Overall, this leads to a slight decrease in the DAC’s noise performance at 4.6K.
- Open Access
- 1 April 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (4)
Measurement setup for the characterization of integrated semiconductor circuits at cryogenic temperatures
Integrated semiconductor circuits operating at cryogenic temperatures can play a crucial role in scaling quantum computing architectures based on trapped-ion and superconducting qubits. Other technologies, such as low-temperature detectors, can also benefit significantly from these circuits. These applications demand high-frequency, cryogenic temperature measurement systems for the thorough characterization of semiconductor components and circuits. This work presents a customizable, high-frequency, fast, and reliable cryogenic measurement setup for measurement temperatures ranging from room temperature to 4.2 K. It features up to two dc probes or two ground-signal-ground probes for frequencies of up to 67 GHz, which can be configured in a 180° or 90° configuration. In addition, up to 48 BeCu wires configured as twisted pairs provide supply and control signals. Furthermore, up to four rf connections can be mounted directly to a printed circuit board. The setup features an optical microscope in the vacuum chamber to position the probes, which is further utilized by a machine vision algorithm, allowing the detection of pads and automatic positioning of the probes over the pads. The hardware is located in a 550 × 500 × 500 mm3 large vacuum chamber with two independent pulse tube cryocoolers with cooling powers of up to 0.9 and 0.4 W at 4.2 K. Exemplary room temperature and cryogenic S-parameter, transient frequency (fT), time-domain, capacitance–voltage, and dc measurements of single transistors and integrated circuits fabricated by Infineon are presented, demonstrating the system’s measurement capability for quantum computing and other applications.
- 1 April 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (4)
Open AccessMeasurement setup for the characterization of integrated semiconductor circuits at cryogenic temperatures
Integrated semiconductor circuits operating at cryogenic temperatures can play a crucial role in scaling quantum computing architectures based on trapped-ion and superconducting qubits. Other technologies, such as low-temperature detectors, can also benefit significantly from these circuits. These applications demand high-frequency, cryogenic temperature measurement systems for the thorough characterization of semiconductor components and circuits. This work presents a customizable, high-frequency, fast, and reliable cryogenic measurement setup for measurement temperatures ranging from room temperature to 4.2 K. It features up to two dc probes or two ground-signal-ground probes for frequencies of up to 67 GHz, which can be configured in a 180° or 90° configuration. In addition, up to 48 BeCu wires configured as twisted pairs provide supply and control signals. Furthermore, up to four rf connections can be mounted directly to a printed circuit board. The setup features an optical microscope in the vacuum chamber to position the probes, which is further utilized by a machine vision algorithm, allowing the detection of pads and automatic positioning of the probes over the pads. The hardware is located in a 550 × 500 × 500 mm3 large vacuum chamber with two independent pulse tube cryocoolers with cooling powers of up to 0.9 and 0.4 W at 4.2 K. Exemplary room temperature and cryogenic S-parameter, transient frequency (fT), time-domain, capacitance–voltage, and dc measurements of single transistors and integrated circuits fabricated by Infineon are presented, demonstrating the system’s measurement capability for quantum computing and other applications.
- Open Access
- 16 April 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 29 (1) , 291603.1-291603.8
Inductor-Less Broadband Energy-Efficient Active Balun up to 60GHz
The paper presents a non-inductive broadband energy-efficient active balun based on a differential pair, intended for use in the input block of a frequency divider for 22nm technology. The developed device can operate in the frequency range from 2 GHz to 60 GHz with a supply voltage of 0.8 V and consume less than 3 mA. The special feature of the developed active balun is that it does not have inductive components, which reduces its size and signal loss. Amplitude of the output signal in working frequency range is from 450 mV to 200 mV. Signal gain in the range from 1-60 GHz varies from -10 dB up to 4 dB. The size of the circuit on the chip is 48x34 um. The device allows you to receive a stable signal at high data transfer rates and provides energy savings due to low current consumption.
- 16 April 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Microsystems, Electronics and Acoustics
- Vol. 29 (1) , 291603.1-291603.8
Open AccessInductor-Less Broadband Energy-Efficient Active Balun up to 60GHz
The paper presents a non-inductive broadband energy-efficient active balun based on a differential pair, intended for use in the input block of a frequency divider for 22nm technology. The developed device can operate in the frequency range from 2 GHz to 60 GHz with a supply voltage of 0.8 V and consume less than 3 mA. The special feature of the developed active balun is that it does not have inductive components, which reduces its size and signal loss. Amplitude of the output signal in working frequency range is from 450 mV to 200 mV. Signal gain in the range from 1-60 GHz varies from -10 dB up to 4 dB. The size of the circuit on the chip is 48x34 um. The device allows you to receive a stable signal at high data transfer rates and provides energy savings due to low current consumption.