Xian Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xian Li has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Jianglan Li
Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, China
2 shared publications - Liang Li
Huazhong University of Science and Technology
2 shared publications - Mengyu Liu
Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, China
2 shared publications - Qiuliang Wang
Chinese Academy of Sciences
2 shared publications - Yunxing Song
Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, China
2 shared publications - Jialuo Liu
Wuhan National High Magnetic Field Center and State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, Wuhan, China
1 shared publication
Latest Publications
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (1) , 1-6
Design and Performance Evaluation of a 9.0-T Frameless Conduction-Cooled Superconducting Magnet
A 9.0-T frameless conduction-cooled superconducting magnet has been successfully developed in Wuhan National High Magnetic Field Center. The electromagnetic design was accomplished using a hybrid global optimization method. The magnet features a cold clear bore of 95 mm. Compared with the first 9.0 T conduction-cooled superconducting magnet with frames developed previously, the frameless design reduces superconducting wire consumption by 17% and lowers the total magnet weight by 29%, while preserving the same cold clear bore size and homogeneity in the 10-mm diameter of spherical volume. Low temperature is achieved using one pulse tube cryocooler, enabling the magnet to reach temperatures below 4.2 K from room temperature. The vertical magnet comprises five coaxial NbTi superconducting coils connected in series, operating at a current of 79.73 A for a magnetic field intensity of 9.0 T, with a total magnetic energy storage of 0.14 MJ. A passive quench protection system is implemented by subdividing the coils, which protects the magnet by enabling the quench to propagate to more coils. The frameless design eliminates sliding interfaces between the coils and structural frames, preventing friction-induced joule heating during excitation and significantly reducing the occurrence of training quenches. This novel design demonstrates improved efficiency and reliability for conduction-cooled superconducting magnet systems.
- 24 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (1) , 1-6
Design and Performance Evaluation of a 9.0-T Frameless Conduction-Cooled Superconducting Magnet
A 9.0-T frameless conduction-cooled superconducting magnet has been successfully developed in Wuhan National High Magnetic Field Center. The electromagnetic design was accomplished using a hybrid global optimization method. The magnet features a cold clear bore of 95 mm. Compared with the first 9.0 T conduction-cooled superconducting magnet with frames developed previously, the frameless design reduces superconducting wire consumption by 17% and lowers the total magnet weight by 29%, while preserving the same cold clear bore size and homogeneity in the 10-mm diameter of spherical volume. Low temperature is achieved using one pulse tube cryocooler, enabling the magnet to reach temperatures below 4.2 K from room temperature. The vertical magnet comprises five coaxial NbTi superconducting coils connected in series, operating at a current of 79.73 A for a magnetic field intensity of 9.0 T, with a total magnetic energy storage of 0.14 MJ. A passive quench protection system is implemented by subdividing the coils, which protects the magnet by enabling the quench to propagate to more coils. The frameless design eliminates sliding interfaces between the coils and structural frames, preventing friction-induced joule heating during excitation and significantly reducing the occurrence of training quenches. This novel design demonstrates improved efficiency and reliability for conduction-cooled superconducting magnet systems.
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (6) , 1-7
Electromagnetic and Cryogenic Design of a Liquid-Helium-Free 9-T NbTi Magnet for Scanning Tunneling Microscopy
The strong magnetic field generated by the superconducting magnet can significantly enhance the capabilities of scanning tunneling microscopy (STM) in exploring novel quantum materials, nano-magnetic systems, and topological materials. A liquid-helium-free 9-T NbTi magnet for STM has been developed at the Wuhan National High Magnetic Field Center and is entirely cooled with a Gifford-McMahon (GM) cryocooler. This magnet features five independent coils, a cold bore diameter of 95 mm, a rated operating current of 80.7 A, and a rated central magnetic field of 9.0 T. The magnetic field uniformity over a 1-cm diameter spherical volume is 0.1%. This article presents the electromagnetic and cryogenic design of the magnet, along with a thermal and mechanical analysis and optimization of the current leads and cooling paths. The optimized magnet system successfully reaches a temperature below 4 K. After six training quenches, the magnet was successfully ramped to and parked at 9.2 T.
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (6) , 1-7
Electromagnetic and Cryogenic Design of a Liquid-Helium-Free 9-T NbTi Magnet for Scanning Tunneling Microscopy
The strong magnetic field generated by the superconducting magnet can significantly enhance the capabilities of scanning tunneling microscopy (STM) in exploring novel quantum materials, nano-magnetic systems, and topological materials. A liquid-helium-free 9-T NbTi magnet for STM has been developed at the Wuhan National High Magnetic Field Center and is entirely cooled with a Gifford-McMahon (GM) cryocooler. This magnet features five independent coils, a cold bore diameter of 95 mm, a rated operating current of 80.7 A, and a rated central magnetic field of 9.0 T. The magnetic field uniformity over a 1-cm diameter spherical volume is 0.1%. This article presents the electromagnetic and cryogenic design of the magnet, along with a thermal and mechanical analysis and optimization of the current leads and cooling paths. The optimized magnet system successfully reaches a temperature below 4 K. After six training quenches, the magnet was successfully ramped to and parked at 9.2 T.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-8
Improvement of Measurement Performance in Density Through Magnetic Levitation Using Asymmetrical Cylindrical Magnets
Negative magnetophoresis-based magnetic levitation (MagLev) is a label-free and simple method to levitate and manipulate nonmagnetic materials, which is a recent research topic of interest in density-based analysis. However, the existing MagLev mainly uses two permanent magnets with a longitudinal symmetry structure, facing difficulties in achieving both a large measurement range and high measurement sensitivity simultaneously. To solve this, a novel asymmetrical cylindrical MagLev configuration is proposed involving two cylindrical magnets with different thicknesses. On this basis, the characteristics of magnetic force at different magnet spacings are investigated, and the levitation behavior of the samples with different densities is explored. According to the numerical and experimental results, it is interestingly found that two different continuous functional regions with inward radial magnetic forces can be formed for density measurement by adjusting the magnet spacing. The functional measurement regions at small magnet spacing and large magnet spacing serve a large measurement range and a high measurement sensitivity, respectively. Importantly, the measurement range and sensitivity in the new MagLev are both better than conventional MagLev. These findings are of significance to understanding the MagLev process and to promote its practicality.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-8
Improvement of Measurement Performance in Density Through Magnetic Levitation Using Asymmetrical Cylindrical Magnets
Negative magnetophoresis-based magnetic levitation (MagLev) is a label-free and simple method to levitate and manipulate nonmagnetic materials, which is a recent research topic of interest in density-based analysis. However, the existing MagLev mainly uses two permanent magnets with a longitudinal symmetry structure, facing difficulties in achieving both a large measurement range and high measurement sensitivity simultaneously. To solve this, a novel asymmetrical cylindrical MagLev configuration is proposed involving two cylindrical magnets with different thicknesses. On this basis, the characteristics of magnetic force at different magnet spacings are investigated, and the levitation behavior of the samples with different densities is explored. According to the numerical and experimental results, it is interestingly found that two different continuous functional regions with inward radial magnetic forces can be formed for density measurement by adjusting the magnet spacing. The functional measurement regions at small magnet spacing and large magnet spacing serve a large measurement range and a high measurement sensitivity, respectively. Importantly, the measurement range and sensitivity in the new MagLev are both better than conventional MagLev. These findings are of significance to understanding the MagLev process and to promote its practicality.