Jae-Hyun Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jae-Hyun Kim has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Choon-Man Lee
Changwon National University
2 shared publications - Ho-In Jeong
Mechatronics Research Center, Changwon National University, Changwon 51140, Republic of Korea
2 shared publications - Dong Won Jung
Faculty of Applied Energy System, Major of Mechanical Engineering, Jeju National University, Jeju-Si, Republic of Korea
1 shared publication - Han-Eol Kim
Department of Smart Manufacturing Engineering, Changwon National University, 20 Changwondaehak-ro, Uichang-gu, Changwon-si 51140, Republic of Korea
1 shared publication - Osama Salem
Jeju National University
1 shared publication - Young Tae Cho
Department of Smart Manufacturing Engineering, Changwon National University
1 shared publication
Latest Publications
- Open Access
- 27 September 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (10) , 1196
Effects of Mo Addition on Microstructure and Corrosion Resistance of Cr25-xCo25Ni25Fe25Mox High-Entropy Alloys via Directed Energy Deposition
Highly entropy alloys (HEAs) are novel materials that have great potential for application in aerospace and marine engineering due to their superior mechanical properties and benefits over conventional materials. NiCrCoFe, also referred to as Ni-based HEA, has exceptional low-temperature strength and microstructural stability. However, HEAs have limited corrosion resistance in some environments, such as a 3.5 wt% sodium chloride (NaCl) solution. Adding corrosion-resistant elements such as molybdenum (Mo) to HEAs is expected to increase their corrosion resistance in a variety of corrosive environments. Metal additive manufacturing reduces production times compared to casting and eliminates shrinkage issues, making it ideal for producing homogeneous HEA. This study used directed energy deposition (DED) to create Cr25-xCo25Ni25Fe25Mox (x = 0, 5, 10%) HEAs. Tensile strength and potentiodynamic polarization tests were used to assess the materials’ mechanical properties and corrosion resistance. The mechanical tests revealed that adding 5% Mo increased yield strength (YS) by 20.1% and ultimate tensile strength (UTS) by 9.5% when compared to 0% Mo. Adding 10% Mo led to a 32.5% increase in YS and a 20.4% increase in UTS. Potentiodynamic polarization tests were used to assess corrosion resistance in a 3.5-weight percent NaCl solution. The results showed that adding Mo significantly increased initial corrosion resistance. The alloy with 5% Mo had a higher corrosion potential (Ecorr) and a lower current density (Icorr) than the alloy with 0% Mo, indicating improved initial corrosion resistance. The alloy containing 10% Mo had the highest corrosion potential and the lowest current density, indicating the slowest corrosion rate and the best initial corrosion resistance. Finally, Cr25-xCo25Ni25Fe25Mox (x = 0, 5, 10%) HEAs produced by DED exhibited excellent mechanical properties and corrosion resistance, which can be attributed to the presence of Mo.
- 27 September 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (10) , 1196
Open AccessEffects of Mo Addition on Microstructure and Corrosion Resistance of Cr25-xCo25Ni25Fe25Mox High-Entropy Alloys via Directed Energy Deposition
Highly entropy alloys (HEAs) are novel materials that have great potential for application in aerospace and marine engineering due to their superior mechanical properties and benefits over conventional materials. NiCrCoFe, also referred to as Ni-based HEA, has exceptional low-temperature strength and microstructural stability. However, HEAs have limited corrosion resistance in some environments, such as a 3.5 wt% sodium chloride (NaCl) solution. Adding corrosion-resistant elements such as molybdenum (Mo) to HEAs is expected to increase their corrosion resistance in a variety of corrosive environments. Metal additive manufacturing reduces production times compared to casting and eliminates shrinkage issues, making it ideal for producing homogeneous HEA. This study used directed energy deposition (DED) to create Cr25-xCo25Ni25Fe25Mox (x = 0, 5, 10%) HEAs. Tensile strength and potentiodynamic polarization tests were used to assess the materials’ mechanical properties and corrosion resistance. The mechanical tests revealed that adding 5% Mo increased yield strength (YS) by 20.1% and ultimate tensile strength (UTS) by 9.5% when compared to 0% Mo. Adding 10% Mo led to a 32.5% increase in YS and a 20.4% increase in UTS. Potentiodynamic polarization tests were used to assess corrosion resistance in a 3.5-weight percent NaCl solution. The results showed that adding Mo significantly increased initial corrosion resistance. The alloy with 5% Mo had a higher corrosion potential (Ecorr) and a lower current density (Icorr) than the alloy with 0% Mo, indicating improved initial corrosion resistance. The alloy containing 10% Mo had the highest corrosion potential and the lowest current density, indicating the slowest corrosion rate and the best initial corrosion resistance. Finally, Cr25-xCo25Ni25Fe25Mox (x = 0, 5, 10%) HEAs produced by DED exhibited excellent mechanical properties and corrosion resistance, which can be attributed to the presence of Mo.
- Open Access
Manufacturing of Ni-Co-Fe-Cr-Al-Ti High-Entropy Alloy Using Directed Energy Deposition and Evaluation of Its Microstructure, Tensile Strength, and Microhardness
High-entropy alloys (HEAs) have drawn significant attention due to their unique design and superior mechanical properties. Comprising 5–35 at% of five or more elements with similar atomic radii, HEAs exhibit high configurational entropy, resulting in single-phase solid solutions rather than intermetallic compounds. Additive manufacturing (AM), particularly direct energy deposition (DED), is effective for producing HEAs due to its rapid cooling rates, which ensure uniform microstructures and minimize defects. These alloys typically form face-centered cubic (FCC) or body-centered cubic (BCC) structures, contributing to their exceptional strength, hardness, and mechanical performance across various temperatures. However, FCC-structured HEAs often have low yield strengths, posing a challenge for structural applications. In this study, a Ni-Co-Fe-Cr-Al-Ti HEA was manufactured using the DED method. This study proposes that the addition of aluminum and titanium creates a γ + γ′ phase structure within a multicomponent FCC-HEA matrix, enhancing the thermal stability and coarsening the resistance and strength. The γ′ phase with an ordered FCC structure significantly improves the mechanical properties. Analysis confirmed the presence of the γ + γ′ structure and demonstrated the alloy’s high tensile strength and microhardness. This approach underscores the potential of AM techniques in advancing HEA production for high-performance applications.
Open AccessManufacturing of Ni-Co-Fe-Cr-Al-Ti High-Entropy Alloy Using Directed Energy Deposition and Evaluation of Its Microstructure, Tensile Strength, and Microhardness
High-entropy alloys (HEAs) have drawn significant attention due to their unique design and superior mechanical properties. Comprising 5–35 at% of five or more elements with similar atomic radii, HEAs exhibit high configurational entropy, resulting in single-phase solid solutions rather than intermetallic compounds. Additive manufacturing (AM), particularly direct energy deposition (DED), is effective for producing HEAs due to its rapid cooling rates, which ensure uniform microstructures and minimize defects. These alloys typically form face-centered cubic (FCC) or body-centered cubic (BCC) structures, contributing to their exceptional strength, hardness, and mechanical performance across various temperatures. However, FCC-structured HEAs often have low yield strengths, posing a challenge for structural applications. In this study, a Ni-Co-Fe-Cr-Al-Ti HEA was manufactured using the DED method. This study proposes that the addition of aluminum and titanium creates a γ + γ′ phase structure within a multicomponent FCC-HEA matrix, enhancing the thermal stability and coarsening the resistance and strength. The γ′ phase with an ordered FCC structure significantly improves the mechanical properties. Analysis confirmed the presence of the γ + γ′ structure and demonstrated the alloy’s high tensile strength and microhardness. This approach underscores the potential of AM techniques in advancing HEA production for high-performance applications.