Zhaonan Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhaonan Lu has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Menglian Zhao
Institute of VLSI Design, Zhejiang University, Hangzhou, China
5 shared publications - Zhichao Tan
College of Information and Electronics Engineering, Zhejiang University, Hangzhou, China
4 shared publications - Shuang Song
Zhejiang University
2 shared publications - Wanyuan Qu
College of Integrated Circuits, Zhejiang University, Hangzhou, China
2 shared publications - Jie Pan
Beijing Smartchip Microelectronics Technology Company Limited, Beijing 100192, China
1 shared publication Junqi Liu
College of Information and Electronics Engineering, Zhejiang University, Hangzhou, China
1 shared publication
Latest Publications
- Open Access
- 3 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. PP, 1
Analysis and Design of RC-Variation-Robust Continuous-Time Delta-Sigma Modulator with Boosted MSA
Continuous-time delta-sigma modulators (CT DSMs) have been widely adopted in IoT and sensor applications. Despite the merits of the inherent anti-alias property and easy-driving resistive input, CT DSMs always suffer from the RC variation issue. While a higher maximum stable amplitude (MSA) can result in a higher dynamic range (DR) with better efficiency, it is often limited to -1 dBFS. To address the above issues, this article presents a hybrid 1-2 sturdy multi-stage noise-shaping (MASH) architecture that exhibits high robustness against RC variations. The proposed modulator integrates a first-order RC-variation-insensitive CT loop filter with a second-order noise-shaping (NS) successive approximation register (SAR) quantizer. By leveraging the inherent unity signal transfer function (STF) of the NS-SAR quantizer, the quantization noise of the first stage is effectively canceled without requiring analog-digital matching. This enables the modulator to achieve a beyond-the-rail MSA while performing aggressive third-order NS. Fabricated in a 55-nm CMOS process, the prototype achieves a measured signal-to-noise-and-distortion ratio (SNDR) of 89.1 dB and a DR of 95.3 dB over a signal bandwidth of 100 kHz, while consuming 459 μW from a single 1.2-V supply. These results yield a state-of-the-art Schreier figure of merit of 178.7 dB among prior art with similar bandwidth. Additionally, the prototype demonstrates robust performance across a wide range of temperatures.
- 3 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Solid-State Circuits Society
- Vol. PP, 1
Open AccessAnalysis and Design of RC-Variation-Robust Continuous-Time Delta-Sigma Modulator with Boosted MSA
Continuous-time delta-sigma modulators (CT DSMs) have been widely adopted in IoT and sensor applications. Despite the merits of the inherent anti-alias property and easy-driving resistive input, CT DSMs always suffer from the RC variation issue. While a higher maximum stable amplitude (MSA) can result in a higher dynamic range (DR) with better efficiency, it is often limited to -1 dBFS. To address the above issues, this article presents a hybrid 1-2 sturdy multi-stage noise-shaping (MASH) architecture that exhibits high robustness against RC variations. The proposed modulator integrates a first-order RC-variation-insensitive CT loop filter with a second-order noise-shaping (NS) successive approximation register (SAR) quantizer. By leveraging the inherent unity signal transfer function (STF) of the NS-SAR quantizer, the quantization noise of the first stage is effectively canceled without requiring analog-digital matching. This enables the modulator to achieve a beyond-the-rail MSA while performing aggressive third-order NS. Fabricated in a 55-nm CMOS process, the prototype achieves a measured signal-to-noise-and-distortion ratio (SNDR) of 89.1 dB and a DR of 95.3 dB over a signal bandwidth of 100 kHz, while consuming 459 μW from a single 1.2-V supply. These results yield a state-of-the-art Schreier figure of merit of 178.7 dB among prior art with similar bandwidth. Additionally, the prototype demonstrates robust performance across a wide range of temperatures.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (12) , 1942-1946
A 15-bit BW/Power Scalable Pseudo-Pseudo-Differential MASH ADC Using an Adaptively Biased Inverter Amplifier
This brief presents an inverter amplifier-based dynamic pseudo-pseudo-differential (PPD) multistage noise-shaping (MASH) analog-to-digital converter (ADC) for sensor interface applications. To enable the bandwidth (BW)/power scalability of single-ended topology-based delta-sigma modulators, an adaptively biased inverter amplifier (ABIA) is proposed, whose power consumption varies with sampling frequency (fS). A 3-0 MASH structure is employed to maintain a high signal-to-quantization-noise ratio (SQNR). Fabricated in 55 nm CMOS technology, the proposed ADC achieves a 15-bit ENOB over 60× BW scaling, from 28 Hz to 1700 Hz, with power consumption ranging from 255 nW to 3.29 μW, thanks to the adaptive biasing scheme. Furthermore, the ADC supports a wide input CM voltage range of 0.1 V to 1.5 V, with a signal-to-noise-and-distortion ratio (SNDR) variation of less than 3 dB. It achieves a Schreier figure-of-merit (FoM) of 178 dB and a Walden FoM of 34.6 fJ/step at 222 kHz fS.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (12) , 1942-1946
A 15-bit BW/Power Scalable Pseudo-Pseudo-Differential MASH ADC Using an Adaptively Biased Inverter Amplifier
This brief presents an inverter amplifier-based dynamic pseudo-pseudo-differential (PPD) multistage noise-shaping (MASH) analog-to-digital converter (ADC) for sensor interface applications. To enable the bandwidth (BW)/power scalability of single-ended topology-based delta-sigma modulators, an adaptively biased inverter amplifier (ABIA) is proposed, whose power consumption varies with sampling frequency (fS). A 3-0 MASH structure is employed to maintain a high signal-to-quantization-noise ratio (SQNR). Fabricated in 55 nm CMOS technology, the proposed ADC achieves a 15-bit ENOB over 60× BW scaling, from 28 Hz to 1700 Hz, with power consumption ranging from 255 nW to 3.29 μW, thanks to the adaptive biasing scheme. Furthermore, the ADC supports a wide input CM voltage range of 0.1 V to 1.5 V, with a signal-to-noise-and-distortion ratio (SNDR) variation of less than 3 dB. It achieves a Schreier figure-of-merit (FoM) of 178 dB and a Walden FoM of 34.6 fJ/step at 222 kHz fS.
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-10
Analysis and Design of a 16-bit Continuous-Time Incremental Delta-Sigma ADC
This paper demonstrates the design of a high-resolution continuous-time (CT) incremental delta-sigma (I-ΔΣ) analog-to-digital converter (ADC). A zero-order successive approximation register (SAR)-assisted extended counting is adopted to achieve higher resolution without affecting the thermal noise performance and conversion time. Acting like a 2-0 multi-stage noise-shaping (MASH) structure, achieving enhanced resolution and improved linearity with little power consumption is possible. Additionally, several energy-efficient techniques are adopted. Fabricated in 55-nm CMOS, the prototype occupies 0.36mm2 active area and consumes 188.6μW from a 1.2-V supply. The implemented CT-IADC achieves a measured dynamic range (DR) of 96.5 dB and a signal-to-noise-and-distortion ratio (SNDR) of 95.4 dB for a maximum input of 1.9Vpp and a bandwidth of 20kHz. The measured SNDR-based Schreier figure of merit (FoMS) is 175.4 dB, the best among the reported results for CT-IADCs. It achieves a 5-dB FoMS improvement on the state-of-the-art works.
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-10
Analysis and Design of a 16-bit Continuous-Time Incremental Delta-Sigma ADC
This paper demonstrates the design of a high-resolution continuous-time (CT) incremental delta-sigma (I-ΔΣ) analog-to-digital converter (ADC). A zero-order successive approximation register (SAR)-assisted extended counting is adopted to achieve higher resolution without affecting the thermal noise performance and conversion time. Acting like a 2-0 multi-stage noise-shaping (MASH) structure, achieving enhanced resolution and improved linearity with little power consumption is possible. Additionally, several energy-efficient techniques are adopted. Fabricated in 55-nm CMOS, the prototype occupies 0.36mm2 active area and consumes 188.6μW from a 1.2-V supply. The implemented CT-IADC achieves a measured dynamic range (DR) of 96.5 dB and a signal-to-noise-and-distortion ratio (SNDR) of 95.4 dB for a maximum input of 1.9Vpp and a bandwidth of 20kHz. The measured SNDR-based Schreier figure of merit (FoMS) is 175.4 dB, the best among the reported results for CT-IADCs. It achieves a 5-dB FoMS improvement on the state-of-the-art works.
- 1 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (4) , 1510-1521
An 871 nW 96.2 dB SNDR Pipelined Second-Order Noise-Shaping SAR ADC Employing Charge-Efficient CLS-Assisted Residue Amplifier
This article presents a two-stage pipelined noise-shaping (NS) successive-approximation-register (SAR) analog-to-digital converters (ADCs) for sub-micro-watt and high-resolution applications. However, it asks for an accurate residue amplification to avoid severe quantization noise leakage from the frontend stage. Therefore, a charge-efficient correlated-level-shifting (CECLS) assisted residue amplifier (RA) is designed by inserting the level-shifting network (LSN) in a two-stage floating inverter amplifier (FIA). In addition to the inherited low-power merit from FIA, it boosts the equivalent open-loop gain to 92 dB while preventing bandwidth reduction and charge-sharing effects, making the amplification more accurate and faster than prior CLS-assisted amplifiers. The prototype is fabricated using 55 nm CMOS technology and occupies an active area of 0.26 mm $^{\mathbf{2}}$ . The measurement results show a 96.2 dB peak-SNDR and 871 nW power consumption under a 1.2 V supply voltage with a 16 kS/s sampling rate. Compared to the recent state-of-the-art ADCs with power under 10 $\mu$ W and SNDR exceeding 90 dB, this ADC presents the best Schreier FoM of 180.8 dB.
- 1 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (4) , 1510-1521
An 871 nW 96.2 dB SNDR Pipelined Second-Order Noise-Shaping SAR ADC Employing Charge-Efficient CLS-Assisted Residue Amplifier
This article presents a two-stage pipelined noise-shaping (NS) successive-approximation-register (SAR) analog-to-digital converters (ADCs) for sub-micro-watt and high-resolution applications. However, it asks for an accurate residue amplification to avoid severe quantization noise leakage from the frontend stage. Therefore, a charge-efficient correlated-level-shifting (CECLS) assisted residue amplifier (RA) is designed by inserting the level-shifting network (LSN) in a two-stage floating inverter amplifier (FIA). In addition to the inherited low-power merit from FIA, it boosts the equivalent open-loop gain to 92 dB while preventing bandwidth reduction and charge-sharing effects, making the amplification more accurate and faster than prior CLS-assisted amplifiers. The prototype is fabricated using 55 nm CMOS technology and occupies an active area of 0.26 mm $^{\mathbf{2}}$ . The measurement results show a 96.2 dB peak-SNDR and 871 nW power consumption under a 1.2 V supply voltage with a 16 kS/s sampling rate. Compared to the recent state-of-the-art ADCs with power under 10 $\mu$ W and SNDR exceeding 90 dB, this ADC presents the best Schreier FoM of 180.8 dB.
- Open Access
- 29 September 2024
- Published by MDPI AG in Electronics
- Vol. 13 (19) , 3865
An 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers
Battery-powered Internet-of-Things applications require high-resolution, energy-efficient analog-to-digital converters (ADCs). There are still limited works on sub-MHz-bandwidth ADC designs. This paper presents a sturdy multi-stage shaping (SMASH) discrete-time (DT) delta-sigma modulator (DSM) structure using a self-cascoded floating-inverter-based dynamic amplifier (FIA). The proposed structure removes the explicit quantization error extraction of the first loop and all the feedback DACs in the cascaded loop, decreasing the design complexity of the circuit. This enables the proposed DT DSM to operate at a higher speed, which is suitable for achieving high-order noise at a low oversampling ratio (OSR). The proposed self-cascoded FIA is more power-efficient and can acquire more than 45 dB DC gain under a 1.2 V supply. The DT DSM implemented in a piece of 55 nm CMOS technology measures an 88.0 dB peak signal-to-noise-and-distortion ratio (SNDR) in a 100 kHz bandwidth (BW) and an 85.3 dB dynamic range (DR), consuming 249.1 μW from a 1.2 V supply at 10 MS/s. The obtained 174.0 dB SNDR-based Schreier figure-of-merit (FoMs) is competitive within state-of-art high-resolution (SNDR > 85 dB) and general-purpose (sub-MHz-bandwidth) ΔΣ ADCs.
- 29 September 2024
- Published by MDPI AG in Electronics
- Vol. 13 (19) , 3865
Open AccessAn 88 dB SNDR 100 kHz BW Sturdy MASH Delta-Sigma Modulator Using Self-Cascoded Floating Inverter Amplifiers
Battery-powered Internet-of-Things applications require high-resolution, energy-efficient analog-to-digital converters (ADCs). There are still limited works on sub-MHz-bandwidth ADC designs. This paper presents a sturdy multi-stage shaping (SMASH) discrete-time (DT) delta-sigma modulator (DSM) structure using a self-cascoded floating-inverter-based dynamic amplifier (FIA). The proposed structure removes the explicit quantization error extraction of the first loop and all the feedback DACs in the cascaded loop, decreasing the design complexity of the circuit. This enables the proposed DT DSM to operate at a higher speed, which is suitable for achieving high-order noise at a low oversampling ratio (OSR). The proposed self-cascoded FIA is more power-efficient and can acquire more than 45 dB DC gain under a 1.2 V supply. The DT DSM implemented in a piece of 55 nm CMOS technology measures an 88.0 dB peak signal-to-noise-and-distortion ratio (SNDR) in a 100 kHz bandwidth (BW) and an 85.3 dB dynamic range (DR), consuming 249.1 μW from a 1.2 V supply at 10 MS/s. The obtained 174.0 dB SNDR-based Schreier figure-of-merit (FoMs) is competitive within state-of-art high-resolution (SNDR > 85 dB) and general-purpose (sub-MHz-bandwidth) ΔΣ ADCs.