Alain Eric Maestrini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alain Eric Maestrini has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Choonsup Lee
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
3 shared publications- Goutam Chattopadhyay
NASA Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
3 shared publications - Sven van Berkel
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
3 shared publications - Cecile Jung-Kubiak
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
2 shared publications - Jose V. Siles
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
2 shared publications Robert Lin
Submillimeter-Wave Advanced Technology Group, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA, USA
2 shared publications
Latest Publications
- Open Access
- 1 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 5 (6) , 1235-1252
Water Hunting Advanced Terahertz Spectrometer on an Ultra-Small Platform (WHATSUP)
- 1 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 5 (6) , 1235-1252
Open AccessWater Hunting Advanced Terahertz Spectrometer on an Ultra-Small Platform (WHATSUP)
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (5) , 852-863
Ultra-Fast Low-Loss SPST Switch Using Planar GaAs Diodes for $G$-Band Radar Receiver Protection
We report on the development of a high-performance, tunable, solid-state, single-pole-single-throw (SPST) switch operating in G-band for radar applications. Future space-borne, high-power G-band radars may require an SPST switch for receiver protection. We explore a novel solid-state switching architecture based on planar GaAs Schottky diodes. The switch, optimized for operation from 158 to 175 GHz, achieves high isolation by absorbing, reflecting, and frequency multiplying the input power to the 2nd harmonic. A first demonstrator is characterized with an ON-state insertion loss 20 dB at 0 dBm input power. The OFF-state isolation exceeds 43 dB at 0 dBm input power and remains above 30 dB at +17 dBm input power. Depending on the required isolation, the switch is tunable with an instantaneous bandwidth ranging from 300 MHz (for 30 dB isolation) to 13 GHz (for 15 dB isolation). The switch is successfully demonstrated to operate at an ultra-fast 4 MHz switching rate with a switching speed of a few nanoseconds.
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (5) , 852-863
Ultra-Fast Low-Loss SPST Switch Using Planar GaAs Diodes for $G$-Band Radar Receiver Protection
We report on the development of a high-performance, tunable, solid-state, single-pole-single-throw (SPST) switch operating in G-band for radar applications. Future space-borne, high-power G-band radars may require an SPST switch for receiver protection. We explore a novel solid-state switching architecture based on planar GaAs Schottky diodes. The switch, optimized for operation from 158 to 175 GHz, achieves high isolation by absorbing, reflecting, and frequency multiplying the input power to the 2nd harmonic. A first demonstrator is characterized with an ON-state insertion loss 20 dB at 0 dBm input power. The OFF-state isolation exceeds 43 dB at 0 dBm input power and remains above 30 dB at +17 dBm input power. Depending on the required isolation, the switch is tunable with an instantaneous bandwidth ranging from 300 MHz (for 30 dB isolation) to 13 GHz (for 15 dB isolation). The switch is successfully demonstrated to operate at an ultra-fast 4 MHz switching rate with a switching speed of a few nanoseconds.
- 3 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (2) , 169-180
A 2 THz Room Temperature Bias-Able Schottky Mixer
We report on the design, fabrication and characterization of a fully solid-state room-temperature compact heterodyne receiver front-end working at 1.90-2.06 THz with 4000K-6000K Double Side Band equivalent noise temperature. The receiver front-end is based on a novel GaAs Schottky sub-harmonic mixer featuring a bias-able anti-parallel pair of diodes monolithically integrated on a thin GaAs membrane and a frequency multiplier chain at 1.03 THz that produces ∼1.5 mW of power. This mixer topology provides inherent benefits such as ability to balance the two diodes and robustness vis-à-vis waveguide dimensions and packaging. The room-temperature sensitivity of this heterodyne receiver sets a new milestone for Schottky receivers and opens the possibility for resolving the emission of atomic oxygen in Earth's atmosphere.
- 3 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (2) , 169-180
A 2 THz Room Temperature Bias-Able Schottky Mixer
We report on the design, fabrication and characterization of a fully solid-state room-temperature compact heterodyne receiver front-end working at 1.90-2.06 THz with 4000K-6000K Double Side Band equivalent noise temperature. The receiver front-end is based on a novel GaAs Schottky sub-harmonic mixer featuring a bias-able anti-parallel pair of diodes monolithically integrated on a thin GaAs membrane and a frequency multiplier chain at 1.03 THz that produces ∼1.5 mW of power. This mixer topology provides inherent benefits such as ability to balance the two diodes and robustness vis-à-vis waveguide dimensions and packaging. The room-temperature sensitivity of this heterodyne receiver sets a new milestone for Schottky receivers and opens the possibility for resolving the emission of atomic oxygen in Earth's atmosphere.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (6) , 830-842
MEMS Phase Shifters for THz Beam-Scanning: Demonstration With a 500–600 GHz Phased Array With Leaky-Wave Feeds
Beam-scanning capabilities for space-borne submillimeter-wave spectrometers are critical for instrument calibration and field-of-view mapping. However, the lack of low-loss waveguide-integrated phase shifters above 500 GHz has been a significant challenge for realizing Terahertz phased array antennas. Recently developed MEMS-actuated phase shifters have emerged as promising candidates, initially demonstrating a 145 ${}^\circ$ phase shift. As a first demonstration of the efficacy of these phase shifters for electronic beam-steering, we present the design, fabrication, and characterization of a linear, near-Nyquist sampled, 4x1-element phased array operating from 500-600 GHz. The array element is a silicon micro-machined leaky-wave feed based on a Fabry-Pérot cavity to enhance directivity and reduce grating lobes while achieving bandwidth requirements with minimal scan loss. It is shown, through measurements, that this antenna feed is suitable for use in larger 8x1-element arrays for applications that require moderate gain (20 dBi) and scanning ( $\pm 20^\circ$ ) with a fan beam. Furthermore, we present measurement results of a second generation of MEMS phase shifters with an increased measured phase shift up to 350 ${}^\circ$ . A full 360 ${}^\circ$ phase-wrapping capability is desired as this will enable high-gain lens-scanning phased arrays that can be used for future submillimeter-wave spectrometers.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (6) , 830-842
MEMS Phase Shifters for THz Beam-Scanning: Demonstration With a 500–600 GHz Phased Array With Leaky-Wave Feeds
Beam-scanning capabilities for space-borne submillimeter-wave spectrometers are critical for instrument calibration and field-of-view mapping. However, the lack of low-loss waveguide-integrated phase shifters above 500 GHz has been a significant challenge for realizing Terahertz phased array antennas. Recently developed MEMS-actuated phase shifters have emerged as promising candidates, initially demonstrating a 145 ${}^\circ$ phase shift. As a first demonstration of the efficacy of these phase shifters for electronic beam-steering, we present the design, fabrication, and characterization of a linear, near-Nyquist sampled, 4x1-element phased array operating from 500-600 GHz. The array element is a silicon micro-machined leaky-wave feed based on a Fabry-Pérot cavity to enhance directivity and reduce grating lobes while achieving bandwidth requirements with minimal scan loss. It is shown, through measurements, that this antenna feed is suitable for use in larger 8x1-element arrays for applications that require moderate gain (20 dBi) and scanning ( $\pm 20^\circ$ ) with a fan beam. Furthermore, we present measurement results of a second generation of MEMS phase shifters with an increased measured phase shift up to 350 ${}^\circ$ . A full 360 ${}^\circ$ phase-wrapping capability is desired as this will enable high-gain lens-scanning phased arrays that can be used for future submillimeter-wave spectrometers.