Qi Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qi Yan has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Tao Geng
Harbin Engineering University
4 shared publications - Weimin Sun
Key Lab of In-fiber Integrated Optics, Ministry Education of China, Harbin Engineering University, Harbin 150001, China
3 shared publications - Cuiting Sun
Key Laboratory of In-Fiber Integrated Optics, Ministry Education of China, Harbin Engineering University, Harbin, China
2 shared publications - Jiabin Wang
Key Laboratory of In-Fiber Integrated Optics, Ministry Education of China, and the Key Laboratory of Photonic Materials and Devices Physics for Oceanic Applications, Ministry of Industry and Information Technology of China, College of Physics and Optoelectronic Engineering, Harbin Engineering University, Harbin, China
2 shared publications - Shengjia Wang
Key Laboratory of In-Fiber Integrated Optics, Ministry of Education, College of Science, Harbin Engineering University, Harbin, China
2 shared publications Anzhi Wang
Key Laboratory of In-Fiber Integrated Optics, Ministry Education of China, Harbin Engineering University, Harbin, China
1 shared publication
Latest Publications
- Open Access
- 24 April 2026
- Published by MDPI AG in Electronics
- Vol. 15 (9) , 1813
Reward-Guided Dynamic Fusion and Modality Decoupling for Enhanced Multimodal Sentiment Analysis
Multimodal Sentiment Analysis (MSA) integrates multiple modalities to better understand human emotions. However, existing methods often neglect heterogeneity among modal features, causing redundancy and inconsistencies. Additionally, the dynamic interplay between modalities is frequently ignored during fusion, limiting performance. To address these issues, we propose Reward-Guided Dynamic Fusion and Modality Decoupling (RDFD). RDFD includes two key components: (1) a feature decoupling module that separates modality-specific and modality-shared features, reducing redundancy and conflicts; (2) a Reward-Guided Dynamic Fusion module that adaptively selects guiding modalities to enhance modality-specific representations and enable flexible fusion. Experiments on the CMU-MOSI and CMU-MOSEI datasets show that RDFD achieves state-of-the-art performance, demonstrating its effectiveness in advancing Multimodal Sentiment Analysis.
- 24 April 2026
- Published by MDPI AG in Electronics
- Vol. 15 (9) , 1813
Open AccessReward-Guided Dynamic Fusion and Modality Decoupling for Enhanced Multimodal Sentiment Analysis
Multimodal Sentiment Analysis (MSA) integrates multiple modalities to better understand human emotions. However, existing methods often neglect heterogeneity among modal features, causing redundancy and inconsistencies. Additionally, the dynamic interplay between modalities is frequently ignored during fusion, limiting performance. To address these issues, we propose Reward-Guided Dynamic Fusion and Modality Decoupling (RDFD). RDFD includes two key components: (1) a feature decoupling module that separates modality-specific and modality-shared features, reducing redundancy and conflicts; (2) a Reward-Guided Dynamic Fusion module that adaptively selects guiding modalities to enhance modality-specific representations and enable flexible fusion. Experiments on the CMU-MOSI and CMU-MOSEI datasets show that RDFD achieves state-of-the-art performance, demonstrating its effectiveness in advancing Multimodal Sentiment Analysis.
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Bionic Lateral-Line Photonic Sensors for High-Sensitivity Vectorial Flow Detection and State Recognition in Underwater Environments
Effective sensing of underwater flow fields provides an important role for intelligent subaquatic equipment. Inspired by the fish lateral-lines, we proposed and demonstrated a novel bionic lateral-line photonic sensor, which employed an asymmetrically structured Fabry-Perot interference (FPI) as the fundamental sensing unit, enabling hydrodynamic signatures to be decoded by spectral evolution. Experimental results showed that the sensor achieves high-sensitivity vector flow velocity detection, with a maximum average sensitivity of 327.50 nm/(m/s) in the measuring range of 0.037 ~ 0.072 m/s. This sensor also measures oscillation frequencies within the 1-10 Hz range, achieves 0.0036 Hz frequency locking accuracy (standard deviation), and maintains a 20 cm maximum detection range. The accurate response to low-frequency signals endows the sensor with the ability to identify low-speed moving targets. And the differential responses to disturbance amplitudes that the proposed sensor has the potential to recognize the motion state of underwater moving targets. This sensor offers a fiber-optic-based alternative for unconventional underwater detection technology.
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Bionic Lateral-Line Photonic Sensors for High-Sensitivity Vectorial Flow Detection and State Recognition in Underwater Environments
Effective sensing of underwater flow fields provides an important role for intelligent subaquatic equipment. Inspired by the fish lateral-lines, we proposed and demonstrated a novel bionic lateral-line photonic sensor, which employed an asymmetrically structured Fabry-Perot interference (FPI) as the fundamental sensing unit, enabling hydrodynamic signatures to be decoded by spectral evolution. Experimental results showed that the sensor achieves high-sensitivity vector flow velocity detection, with a maximum average sensitivity of 327.50 nm/(m/s) in the measuring range of 0.037 ~ 0.072 m/s. This sensor also measures oscillation frequencies within the 1-10 Hz range, achieves 0.0036 Hz frequency locking accuracy (standard deviation), and maintains a 20 cm maximum detection range. The accurate response to low-frequency signals endows the sensor with the ability to identify low-speed moving targets. And the differential responses to disturbance amplitudes that the proposed sensor has the potential to recognize the motion state of underwater moving targets. This sensor offers a fiber-optic-based alternative for unconventional underwater detection technology.
- Open Access
Influence of Optical Fiber Parameters on the Speckle Pattern and Spectral Observation in Astronomy
Optical fibers serve as a bridge to transmit starlight into the spectrograph in fiber spectral surveys. Due to the interference between multiple modes supported within the fiber, a granular speckle pattern appears on the end of the fiber and leads to an uneven and random energy distribution in the spectrum. This effect is called mode noise, which reduces the accuracy of high-resolution spectral detection. This work investigates the influence of transmitted mode numbers on speckle patterns by using fibers with different core diameters and numerical apertures. A reciprocating mechanical scrambler is proposed for suppressing near-field speckles with negligible focal ratio degradation. We use centroid offset and radial power spectrum to quantitatively evaluate the characteristics of the speckles with and without scrambling. Experimental results show that more modes in a fiber with a larger core diameter reduce the centroid offset of the speckle and make the energy distribution more uniform. The mechanical mode scrambler significantly reduces the random centroid deviation caused by speckles, which is more obvious for large-core fibers. The standard deviation of centroid offset in 1000-cycle tests for the 160 µm core fiber is only 0.043 µm, which is one-tenth of that for the 16 µm core fiber. However, in solar spectrum measurement using these fibers, small-core fibers can more easily achieve higher spectral resolution and capture more spectral information. Therefore, large-core fibers are suitable for tasks requiring high accuracy, while fibers with a smaller core diameter should be applied for high-precision spectral measurement.
Open AccessInfluence of Optical Fiber Parameters on the Speckle Pattern and Spectral Observation in Astronomy
Optical fibers serve as a bridge to transmit starlight into the spectrograph in fiber spectral surveys. Due to the interference between multiple modes supported within the fiber, a granular speckle pattern appears on the end of the fiber and leads to an uneven and random energy distribution in the spectrum. This effect is called mode noise, which reduces the accuracy of high-resolution spectral detection. This work investigates the influence of transmitted mode numbers on speckle patterns by using fibers with different core diameters and numerical apertures. A reciprocating mechanical scrambler is proposed for suppressing near-field speckles with negligible focal ratio degradation. We use centroid offset and radial power spectrum to quantitatively evaluate the characteristics of the speckles with and without scrambling. Experimental results show that more modes in a fiber with a larger core diameter reduce the centroid offset of the speckle and make the energy distribution more uniform. The mechanical mode scrambler significantly reduces the random centroid deviation caused by speckles, which is more obvious for large-core fibers. The standard deviation of centroid offset in 1000-cycle tests for the 160 µm core fiber is only 0.043 µm, which is one-tenth of that for the 16 µm core fiber. However, in solar spectrum measurement using these fibers, small-core fibers can more easily achieve higher spectral resolution and capture more spectral information. Therefore, large-core fibers are suitable for tasks requiring high accuracy, while fibers with a smaller core diameter should be applied for high-precision spectral measurement.
- 26 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (16) , 866-869
A Sensor With High Strain Sensitivity Based on Four-Sided Modulated LPFG
In this letter, a novel strain sensor based on four-sided modulated long period fiber grating (FM-LPFG) is introduced and demonstrated. Due to the asymmetric refractive index modulation of the CO 2 laser, the cladding radius is reduced and the core deviation effect is strengthened. In addition, by simulating the equivalent strain during tension, the strain sensitive area of FM-LPFG is proposed. The measurement results indicate that the strain sensitivity of FM-LPFG is 127.5 pm/$\mu \varepsilon $ ($0~\sim ~125~\mu \varepsilon$ ) and 17.7 pm/$\mu \varepsilon $ ($125~\sim ~575~\mu \varepsilon$ ). The proposed FM-LPFG can be realistically applied in precision measurement.- 26 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (16) , 866-869
A Sensor With High Strain Sensitivity Based on Four-Sided Modulated LPFG
In this letter, a novel strain sensor based on four-sided modulated long period fiber grating (FM-LPFG) is introduced and demonstrated. Due to the asymmetric refractive index modulation of the CO 2 laser, the cladding radius is reduced and the core deviation effect is strengthened. In addition, by simulating the equivalent strain during tension, the strain sensitive area of FM-LPFG is proposed. The measurement results indicate that the strain sensitivity of FM-LPFG is 127.5 pm/$\mu \varepsilon $ ($0~\sim ~125~\mu \varepsilon$ ) and 17.7 pm/$\mu \varepsilon $ ($125~\sim ~575~\mu \varepsilon$ ). The proposed FM-LPFG can be realistically applied in precision measurement.- 3 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (1) , 11-14
An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing
A Mach-Zehnder interferometer, composed of two core-offset tapered joints (COTJ-MZI), is proposed and experimentally verified for high sensitivity strain sensing. The COTJ-MZI is handily fabricated by core-offset fusion splicing and tapering based on all single-mode fiber (SMF). The fiber cores form stepped cores within the COTJs. The transmission spectra with different core-offset values and interference lengths are obtained and theoretically analyzed. Benefitting from the stepped cores in the COTJ structure, the mode coupling points are able to be modulated easily by the applied strain. A strain sensitivity of −108.0 pm/$\mu \varepsilon $ (0-$400~\mu \varepsilon$ ) and −47.6 pm/$\mu \varepsilon $ (400-1200$\mu \varepsilon$ ) is achieved. In addition, the temperature response is also characterized as low as 23.3 pm/°C. With the advantages of low cost and high sensitivity, the COTJ-MZI sensor is competitive candidates in the field of strain measurement.- 3 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 34 (1) , 11-14
An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing
A Mach-Zehnder interferometer, composed of two core-offset tapered joints (COTJ-MZI), is proposed and experimentally verified for high sensitivity strain sensing. The COTJ-MZI is handily fabricated by core-offset fusion splicing and tapering based on all single-mode fiber (SMF). The fiber cores form stepped cores within the COTJs. The transmission spectra with different core-offset values and interference lengths are obtained and theoretically analyzed. Benefitting from the stepped cores in the COTJ structure, the mode coupling points are able to be modulated easily by the applied strain. A strain sensitivity of −108.0 pm/$\mu \varepsilon $ (0-$400~\mu \varepsilon$ ) and −47.6 pm/$\mu \varepsilon $ (400-1200$\mu \varepsilon$ ) is achieved. In addition, the temperature response is also characterized as low as 23.3 pm/°C. With the advantages of low cost and high sensitivity, the COTJ-MZI sensor is competitive candidates in the field of strain measurement.