Qinghua Deng
Research Subjects
Qinghua Deng has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Husheng Tang
Wuhu R & D Center for Energy Conversion and Storage Materials,Anhui,CHINA. Wuhu Vocational Technical University,Wuhu,Anhui,CHINA
2 shared publications- Jiaxin Jiang
College of Materials Engineering, Wuhu Vocational Technical University, Wuhu 241003, China
2 shared publications - Tiancheng Yao
College of Materials Science and Engineering, Hohai University, Changzhou 213000, China
2 shared publications - Wenjie Wu
College of Materials Engineering, Wuhu Vocational Technical University, Wuhu 241003, China
2 shared publications - Youzhi Yao
School of Materials Engineering, Wuhu Institute of Technology, Wuhu 241003, China
2 shared publications Benyong Gao
1 shared publication
Latest Publications
- Open Access
Synthesis of Fe-Co Bimetallic Supported on Cotton Residue Biochar: Catalytic Performance and Mechanistic Investigation for CO2 Hydrogenation
Biochar carriers were prepared from cotton residue waste, and Fe-Co bimetallic catalysts with different ratios were constructed using impregnation method. Their catalytic performance in CO2 hydrogenation to hydrocarbons was investigated. The structural evolution and catalytic behavior of the catalyst were systematically studied through various characterization methods such as XRD, XPS, TEM, BET, and DFT calculations. Based on the characterization of fresh and spent catalysts, the spinel phase of CoFe2O4 in the fresh catalyst is proposed to transform substantially into metallic Fe0 and Co0 upon H2 reduction; during subsequent CO2 hydrogenation, these metallic phases are proposed to partially convert to χ-(Fe1−xCox)5C2 carbides, accompanied by partial graphitization of the biochar support. Because no sample was characterized after H2 reduction but before CO2 hydrogenation, this sequence is inferred. Under the same experimental conditions, Fe15Co5-BC exhibits the best CO2 conversion, with CH4 and C2-C4 alkanes as the main products, indicating that the system possesses bifunctional catalytic characteristics combining CO2 methanation and Fischer–Tropsch synthesis. The CO selectivity exhibited a V-shaped trend with respect to Co loading, with the lowest value achieved at the intermediate Fe/Co ratio (Fe15Co5-BC), mainly attributed to the improved overall CO2 conversion and the efficient conversion of carbon intermediates into hydrocarbons. DFT calculations reveal that Fe-Co bimetallic sites synergistically weaken C-O bonds and thermodynamically favor deep hydrogenation pathways. This work provides experimental and theoretical insights for the application of biochar-based bimetallic catalysts in CO2 hydrogenation.
Open AccessSynthesis of Fe-Co Bimetallic Supported on Cotton Residue Biochar: Catalytic Performance and Mechanistic Investigation for CO2 Hydrogenation
Biochar carriers were prepared from cotton residue waste, and Fe-Co bimetallic catalysts with different ratios were constructed using impregnation method. Their catalytic performance in CO2 hydrogenation to hydrocarbons was investigated. The structural evolution and catalytic behavior of the catalyst were systematically studied through various characterization methods such as XRD, XPS, TEM, BET, and DFT calculations. Based on the characterization of fresh and spent catalysts, the spinel phase of CoFe2O4 in the fresh catalyst is proposed to transform substantially into metallic Fe0 and Co0 upon H2 reduction; during subsequent CO2 hydrogenation, these metallic phases are proposed to partially convert to χ-(Fe1−xCox)5C2 carbides, accompanied by partial graphitization of the biochar support. Because no sample was characterized after H2 reduction but before CO2 hydrogenation, this sequence is inferred. Under the same experimental conditions, Fe15Co5-BC exhibits the best CO2 conversion, with CH4 and C2-C4 alkanes as the main products, indicating that the system possesses bifunctional catalytic characteristics combining CO2 methanation and Fischer–Tropsch synthesis. The CO selectivity exhibited a V-shaped trend with respect to Co loading, with the lowest value achieved at the intermediate Fe/Co ratio (Fe15Co5-BC), mainly attributed to the improved overall CO2 conversion and the efficient conversion of carbon intermediates into hydrocarbons. DFT calculations reveal that Fe-Co bimetallic sites synergistically weaken C-O bonds and thermodynamically favor deep hydrogenation pathways. This work provides experimental and theoretical insights for the application of biochar-based bimetallic catalysts in CO2 hydrogenation.
- Open Access
- 7 September 2026
- Published by Tsinghua University Press in Nano Research Energy
- Vol. 6 (1) , e9120264
Gradient delocalized 4f-2p-3d orbital cascade of Gd-O-Mn sites remolding interfacial electronic landscape for accelerated Li-CO 2 batteries redox kinetics
Conventional transition-metal cathodes constrained by a limited 3d-2p orbital manifold suffer from an unfavorable electronic structure that impedes the electrochemical kinetics of Li-CO2 batteries. Incorporating rare-earth 4f orbitals introduces strong spin-orbit coupling and a delocalized f-p-d cascade, fundamentally remolding interfacial electronic landscape. Herein, asymmetric Gd-O-Mn active sites are constructed via a 4f-2p-3d gradient orbital coupling strategy by doping gadolinium into Mn3O4 nanorods. This establishes a cascaded Gd 4f-O 2p-Mn 3d electronic conduit inducing directional charge redistribution and augmented electron density. The electropositive Gd dopant simultaneously elevates the O 2p band center and activates lattice oxygen redox chemistry, facilitating both the nucleophilic attack on CO2 and the subsequent cleavage of carbonate bonds. Consequently, the Gd-Mn3O4 cathode delivers an exceptional full discharge capacity of 14,640 mAh·g–1, a remarkably low overpotential of 1.23 V, and extended cycling stability over 230 cycles. Comprehensive experimental and theoretical analyses reveal the f-p-d cascade coupling not only preserves the structural integrity of the MnO6 framework but also optimizes the adsorption energetics of key intermediates *C2O4. This work elucidates the mechanistic role of gradient orbital hybridization in stabilizing manganese-based cathodes and offers a new paradigm for the rational design of advanced catalytic sites in Li-CO2 batteries cathodes.
- 7 September 2026
- Published by Tsinghua University Press in Nano Research Energy
- Vol. 6 (1) , e9120264
Open AccessGradient delocalized 4f-2p-3d orbital cascade of Gd-O-Mn sites remolding interfacial electronic landscape for accelerated Li-CO 2 batteries redox kinetics
Conventional transition-metal cathodes constrained by a limited 3d-2p orbital manifold suffer from an unfavorable electronic structure that impedes the electrochemical kinetics of Li-CO2 batteries. Incorporating rare-earth 4f orbitals introduces strong spin-orbit coupling and a delocalized f-p-d cascade, fundamentally remolding interfacial electronic landscape. Herein, asymmetric Gd-O-Mn active sites are constructed via a 4f-2p-3d gradient orbital coupling strategy by doping gadolinium into Mn3O4 nanorods. This establishes a cascaded Gd 4f-O 2p-Mn 3d electronic conduit inducing directional charge redistribution and augmented electron density. The electropositive Gd dopant simultaneously elevates the O 2p band center and activates lattice oxygen redox chemistry, facilitating both the nucleophilic attack on CO2 and the subsequent cleavage of carbonate bonds. Consequently, the Gd-Mn3O4 cathode delivers an exceptional full discharge capacity of 14,640 mAh·g–1, a remarkably low overpotential of 1.23 V, and extended cycling stability over 230 cycles. Comprehensive experimental and theoretical analyses reveal the f-p-d cascade coupling not only preserves the structural integrity of the MnO6 framework but also optimizes the adsorption energetics of key intermediates *C2O4. This work elucidates the mechanistic role of gradient orbital hybridization in stabilizing manganese-based cathodes and offers a new paradigm for the rational design of advanced catalytic sites in Li-CO2 batteries cathodes.
- Open Access
- 2 September 2026
- Published by Elsevier in SSRN Electronic Journal
Oxygen Vacancy-Modulated MoO3-x Nanorods Anchoring Ru Nanoparticles for Efficient Alkaline Hydrogen Evolution
Developing low-cost, high-efficiency, and durable electrocatalysts is critical for the large-scale implementation of electrochemical water splitting for hydrogen production. Herein, oxygen-deficient MoO3-x nanorods were successfully fabricated and served as a superior substrate for anchoring Ru nanoparticles to construct a high-performance composite hydrogen evolution reaction (HER) electrocatalyst. The introduced oxygen vacancies effectively regulate the electronic structure of MoO3-x nanorods, optimize the adsorption/desorption behavior of hydrogen intermediates, and lower the reaction energy barrier. Meanwhile, the strong metal-support interaction between Ru active sites and defective MoO3-x substrate accelerates interfacial charge transfer, exposes abundant active sites, and efficiently inhibits the aggregation and corrosion of Ru nanoparticles during electrolysis. Benefiting from the synergistic effect of defect engineering and interfacial electronic modulation, the optimized Ru NPs@MoO3-x catalyst delivers remarkable hydrogen evolution activity, realizing an ultralow overpotential of 27 mV at a current density of 10 mA cm-2 and robust structural stability in 1.0 M KOH. This work provides a facile and reliable strategy for the rational design and fabrication of high-efficiency noble metal composite electrocatalysts via defect and interface engineering.
- 2 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOxygen Vacancy-Modulated MoO3-x Nanorods Anchoring Ru Nanoparticles for Efficient Alkaline Hydrogen Evolution
Developing low-cost, high-efficiency, and durable electrocatalysts is critical for the large-scale implementation of electrochemical water splitting for hydrogen production. Herein, oxygen-deficient MoO3-x nanorods were successfully fabricated and served as a superior substrate for anchoring Ru nanoparticles to construct a high-performance composite hydrogen evolution reaction (HER) electrocatalyst. The introduced oxygen vacancies effectively regulate the electronic structure of MoO3-x nanorods, optimize the adsorption/desorption behavior of hydrogen intermediates, and lower the reaction energy barrier. Meanwhile, the strong metal-support interaction between Ru active sites and defective MoO3-x substrate accelerates interfacial charge transfer, exposes abundant active sites, and efficiently inhibits the aggregation and corrosion of Ru nanoparticles during electrolysis. Benefiting from the synergistic effect of defect engineering and interfacial electronic modulation, the optimized Ru NPs@MoO3-x catalyst delivers remarkable hydrogen evolution activity, realizing an ultralow overpotential of 27 mV at a current density of 10 mA cm-2 and robust structural stability in 1.0 M KOH. This work provides a facile and reliable strategy for the rational design and fabrication of high-efficiency noble metal composite electrocatalysts via defect and interface engineering.
- Open Access
Controllable Synthesis of Silver–Copper Bimetallic Nanoparticle-Decorated Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Performance
Monometallic nanoparticles tend to aggregate and exhibit limited catalytic performance, rendering them inadequate for high-efficiency electrocatalytic applications. In this study, a green and mild liquid-phase reduction method was employed, using sodium borohydride to simultaneously reduce graphene oxide (GO) and metal precursors. This approach enabled the uniform and highly dispersed loading of silver–copper bimetallic alloy nanoparticles (Ag1−xCux NPs) onto the surface of reduced graphene oxide (RGO). By tuning the Ag/Cu molar ratio, the size, composition, and morphology of the nanoparticles were precisely controlled. Characterization by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) confirmed that GO was efficiently reduced to RGO, and the bimetallic nanoparticles were uniformly distributed on the RGO surface in an alloy state with small particle size and no obvious agglomeration. A strong interfacial interaction between the metal nanoparticles and the support was also observed. Electrochemical tests demonstrated that the composite exhibits excellent electrocatalytic activity toward the reduction of H2O2. Notably, the reduction peak current at the Ag0.5Cu0.5NPs/RGO modified electrode was 1.8 and 2.3 times higher than those at the monometallic Ag/RGO and Cu/RGO electrodes, respectively. These results provide a reliable theoretical basis and a viable research route for the controllable synthesis of low-cost, high-performance electrocatalytic nanocomposites and their application in electrochemical H2O2 sensing.
Open AccessControllable Synthesis of Silver–Copper Bimetallic Nanoparticle-Decorated Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Performance
Monometallic nanoparticles tend to aggregate and exhibit limited catalytic performance, rendering them inadequate for high-efficiency electrocatalytic applications. In this study, a green and mild liquid-phase reduction method was employed, using sodium borohydride to simultaneously reduce graphene oxide (GO) and metal precursors. This approach enabled the uniform and highly dispersed loading of silver–copper bimetallic alloy nanoparticles (Ag1−xCux NPs) onto the surface of reduced graphene oxide (RGO). By tuning the Ag/Cu molar ratio, the size, composition, and morphology of the nanoparticles were precisely controlled. Characterization by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) confirmed that GO was efficiently reduced to RGO, and the bimetallic nanoparticles were uniformly distributed on the RGO surface in an alloy state with small particle size and no obvious agglomeration. A strong interfacial interaction between the metal nanoparticles and the support was also observed. Electrochemical tests demonstrated that the composite exhibits excellent electrocatalytic activity toward the reduction of H2O2. Notably, the reduction peak current at the Ag0.5Cu0.5NPs/RGO modified electrode was 1.8 and 2.3 times higher than those at the monometallic Ag/RGO and Cu/RGO electrodes, respectively. These results provide a reliable theoretical basis and a viable research route for the controllable synthesis of low-cost, high-performance electrocatalytic nanocomposites and their application in electrochemical H2O2 sensing.
- Open Access
- 14 May 2026
- Published by Elsevier in SSRN Electronic Journal
Interface engineering of biomass-derived carbon-supported cobalt sulfide for enhanced oxygen evolution reaction
Biomass-derived carbon is an attractive catalyst support owing to its sustainability, porous structure, and good electrical conductivity. Herein, camphor leaf was selected as carbon precursor and CoS2@C catalyst was synthesized via a carbonization-hydrothermal-sulfuration process. The carbonization temperature and the Co/C mass ratio were optimized to improve the catalytic activity for OER. The otptimized CoS2@C catalyst exhibited an overpotential of 306 mV at current density of 10 mA cm-2 and smallest Tafel slope of 13.9 mV dec-1. The interfacial interaction between carbon substrate and CoS2 modulated the electronic structure of CoS2 and accelerated the electron transfer among the interface. In addition, the biomass-derived carbon supported CoS2 inhibited the aggregation and inactivation of active sites, increasing the stability of CoS2@C. This work provides a guidance of the synthesis of biomass-derived carbon supported metal compounds for electrochemical reactions.
- 14 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInterface engineering of biomass-derived carbon-supported cobalt sulfide for enhanced oxygen evolution reaction
Biomass-derived carbon is an attractive catalyst support owing to its sustainability, porous structure, and good electrical conductivity. Herein, camphor leaf was selected as carbon precursor and CoS2@C catalyst was synthesized via a carbonization-hydrothermal-sulfuration process. The carbonization temperature and the Co/C mass ratio were optimized to improve the catalytic activity for OER. The otptimized CoS2@C catalyst exhibited an overpotential of 306 mV at current density of 10 mA cm-2 and smallest Tafel slope of 13.9 mV dec-1. The interfacial interaction between carbon substrate and CoS2 modulated the electronic structure of CoS2 and accelerated the electron transfer among the interface. In addition, the biomass-derived carbon supported CoS2 inhibited the aggregation and inactivation of active sites, increasing the stability of CoS2@C. This work provides a guidance of the synthesis of biomass-derived carbon supported metal compounds for electrochemical reactions.
- 30 July 2024
- Published by World Scientific Pub Co Pte Ltd in Functional Materials Letters
- Vol. 17 (08)
Restrained interfacial resistance Co5.47N@C derived from metal-organic frameworks for advanced Li-CO2 batteries cathodes
Lithium–carbon dioxide (Li–CO2) batteries are novel high energy density energy storage devices that can simultaneously enrich and convert CO2, but their widespread implementation is hindered by the continuous accumulation of lithium carbonate at the cathode. Herein, we developed non-precious metal cobalt-based nitride matrix composite Co[ ]N@C based on metal-organic frameworks precursor for the catalytic cathode of advanced Li–CO2 batteries. The highly stable Co[ ]N achieves favorable adsorption and catalysis of CO2 molecules by virtue of the excellent electronic structure on the surface, while the nanoscale high dispersion also effectively promotes interfacial electron transfer. As expected, the assembled Li–CO2 battery exhibits excellent electrochemical performance in the discharge capacity of 10,000 mAh g[ ] and a cycling capability of about 400 h. Further density functional theory (DFT) calculations explored the relationship between electronic structure and electrochemical activity. This work promotes the development of catalytic materials for Li–CO2 batteries cathode.
- 30 July 2024
- Published by World Scientific Pub Co Pte Ltd in Functional Materials Letters
- Vol. 17 (08)
Restrained interfacial resistance Co5.47N@C derived from metal-organic frameworks for advanced Li-CO2 batteries cathodes
Lithium–carbon dioxide (Li–CO2) batteries are novel high energy density energy storage devices that can simultaneously enrich and convert CO2, but their widespread implementation is hindered by the continuous accumulation of lithium carbonate at the cathode. Herein, we developed non-precious metal cobalt-based nitride matrix composite Co[ ]N@C based on metal-organic frameworks precursor for the catalytic cathode of advanced Li–CO2 batteries. The highly stable Co[ ]N achieves favorable adsorption and catalysis of CO2 molecules by virtue of the excellent electronic structure on the surface, while the nanoscale high dispersion also effectively promotes interfacial electron transfer. As expected, the assembled Li–CO2 battery exhibits excellent electrochemical performance in the discharge capacity of 10,000 mAh g[ ] and a cycling capability of about 400 h. Further density functional theory (DFT) calculations explored the relationship between electronic structure and electrochemical activity. This work promotes the development of catalytic materials for Li–CO2 batteries cathode.