Jiaxin Jiang
Jiaxin Jiang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Qinghua Deng
College of Materials Engineering, Wuhu Vocational Technical University, Wuhu 241003, China
2 shared publications - Tiancheng Yao
College of Materials Science and Engineering, Hohai University, Changzhou 213000, China
2 shared publications - Wenjie Wu
College of Materials Engineering, Wuhu Vocational Technical University, Wuhu 241003, China
2 shared publications - Youzhi Yao
School of Materials Engineering, Wuhu Institute of Technology, Wuhu 241003, China
2 shared publications - Ping Cheng
Australian Institute for Bioengineering and Nanotechnology The University of Queensland St. Lucia Queensland Australia
1 shared publication - Tianyu Wang
Key Laboratory of Environmental Remediation and Ecological Health, Ministry of Industry and Information Technology, School of Environmental and Biological Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
1 shared publication
Latest Publications
- Open Access
Synthesis of Fe-Co Bimetallic Supported on Cotton Residue Biochar: Catalytic Performance and Mechanistic Investigation for CO2 Hydrogenation
Biochar carriers were prepared from cotton residue waste, and Fe-Co bimetallic catalysts with different ratios were constructed using impregnation method. Their catalytic performance in CO2 hydrogenation to hydrocarbons was investigated. The structural evolution and catalytic behavior of the catalyst were systematically studied through various characterization methods such as XRD, XPS, TEM, BET, and DFT calculations. Based on the characterization of fresh and spent catalysts, the spinel phase of CoFe2O4 in the fresh catalyst is proposed to transform substantially into metallic Fe0 and Co0 upon H2 reduction; during subsequent CO2 hydrogenation, these metallic phases are proposed to partially convert to χ-(Fe1−xCox)5C2 carbides, accompanied by partial graphitization of the biochar support. Because no sample was characterized after H2 reduction but before CO2 hydrogenation, this sequence is inferred. Under the same experimental conditions, Fe15Co5-BC exhibits the best CO2 conversion, with CH4 and C2-C4 alkanes as the main products, indicating that the system possesses bifunctional catalytic characteristics combining CO2 methanation and Fischer–Tropsch synthesis. The CO selectivity exhibited a V-shaped trend with respect to Co loading, with the lowest value achieved at the intermediate Fe/Co ratio (Fe15Co5-BC), mainly attributed to the improved overall CO2 conversion and the efficient conversion of carbon intermediates into hydrocarbons. DFT calculations reveal that Fe-Co bimetallic sites synergistically weaken C-O bonds and thermodynamically favor deep hydrogenation pathways. This work provides experimental and theoretical insights for the application of biochar-based bimetallic catalysts in CO2 hydrogenation.
Open AccessSynthesis of Fe-Co Bimetallic Supported on Cotton Residue Biochar: Catalytic Performance and Mechanistic Investigation for CO2 Hydrogenation
Biochar carriers were prepared from cotton residue waste, and Fe-Co bimetallic catalysts with different ratios were constructed using impregnation method. Their catalytic performance in CO2 hydrogenation to hydrocarbons was investigated. The structural evolution and catalytic behavior of the catalyst were systematically studied through various characterization methods such as XRD, XPS, TEM, BET, and DFT calculations. Based on the characterization of fresh and spent catalysts, the spinel phase of CoFe2O4 in the fresh catalyst is proposed to transform substantially into metallic Fe0 and Co0 upon H2 reduction; during subsequent CO2 hydrogenation, these metallic phases are proposed to partially convert to χ-(Fe1−xCox)5C2 carbides, accompanied by partial graphitization of the biochar support. Because no sample was characterized after H2 reduction but before CO2 hydrogenation, this sequence is inferred. Under the same experimental conditions, Fe15Co5-BC exhibits the best CO2 conversion, with CH4 and C2-C4 alkanes as the main products, indicating that the system possesses bifunctional catalytic characteristics combining CO2 methanation and Fischer–Tropsch synthesis. The CO selectivity exhibited a V-shaped trend with respect to Co loading, with the lowest value achieved at the intermediate Fe/Co ratio (Fe15Co5-BC), mainly attributed to the improved overall CO2 conversion and the efficient conversion of carbon intermediates into hydrocarbons. DFT calculations reveal that Fe-Co bimetallic sites synergistically weaken C-O bonds and thermodynamically favor deep hydrogenation pathways. This work provides experimental and theoretical insights for the application of biochar-based bimetallic catalysts in CO2 hydrogenation.
- Open Access
Controllable Synthesis of Silver–Copper Bimetallic Nanoparticle-Decorated Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Performance
Monometallic nanoparticles tend to aggregate and exhibit limited catalytic performance, rendering them inadequate for high-efficiency electrocatalytic applications. In this study, a green and mild liquid-phase reduction method was employed, using sodium borohydride to simultaneously reduce graphene oxide (GO) and metal precursors. This approach enabled the uniform and highly dispersed loading of silver–copper bimetallic alloy nanoparticles (Ag1−xCux NPs) onto the surface of reduced graphene oxide (RGO). By tuning the Ag/Cu molar ratio, the size, composition, and morphology of the nanoparticles were precisely controlled. Characterization by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) confirmed that GO was efficiently reduced to RGO, and the bimetallic nanoparticles were uniformly distributed on the RGO surface in an alloy state with small particle size and no obvious agglomeration. A strong interfacial interaction between the metal nanoparticles and the support was also observed. Electrochemical tests demonstrated that the composite exhibits excellent electrocatalytic activity toward the reduction of H2O2. Notably, the reduction peak current at the Ag0.5Cu0.5NPs/RGO modified electrode was 1.8 and 2.3 times higher than those at the monometallic Ag/RGO and Cu/RGO electrodes, respectively. These results provide a reliable theoretical basis and a viable research route for the controllable synthesis of low-cost, high-performance electrocatalytic nanocomposites and their application in electrochemical H2O2 sensing.
Open AccessControllable Synthesis of Silver–Copper Bimetallic Nanoparticle-Decorated Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Performance
Monometallic nanoparticles tend to aggregate and exhibit limited catalytic performance, rendering them inadequate for high-efficiency electrocatalytic applications. In this study, a green and mild liquid-phase reduction method was employed, using sodium borohydride to simultaneously reduce graphene oxide (GO) and metal precursors. This approach enabled the uniform and highly dispersed loading of silver–copper bimetallic alloy nanoparticles (Ag1−xCux NPs) onto the surface of reduced graphene oxide (RGO). By tuning the Ag/Cu molar ratio, the size, composition, and morphology of the nanoparticles were precisely controlled. Characterization by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) confirmed that GO was efficiently reduced to RGO, and the bimetallic nanoparticles were uniformly distributed on the RGO surface in an alloy state with small particle size and no obvious agglomeration. A strong interfacial interaction between the metal nanoparticles and the support was also observed. Electrochemical tests demonstrated that the composite exhibits excellent electrocatalytic activity toward the reduction of H2O2. Notably, the reduction peak current at the Ag0.5Cu0.5NPs/RGO modified electrode was 1.8 and 2.3 times higher than those at the monometallic Ag/RGO and Cu/RGO electrodes, respectively. These results provide a reliable theoretical basis and a viable research route for the controllable synthesis of low-cost, high-performance electrocatalytic nanocomposites and their application in electrochemical H2O2 sensing.