Toshiki Nagai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Toshiki Nagai has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Wei‐Shao Lin
Department of Prosthodontics Indiana University School of Dentistry Indianapolis Indiana USA
9 shared publications - Amal Alfaraj
Department of Prosthodontics College of Dentistry King Faisal University Al Ahsa Saudi Arabia
4 shared publications - Chao‐Chieh Yang
Department of Prosthodontics Indiana University School of Dentistry Indianapolis Indiana USA
3 shared publications - Dean Morton
Department of Prosthodontics Indiana University School of Dentistry Indianapolis Indiana USA
3 shared publications - Weiqing Liu
Department of Restorative and Prosthetic Dentistry The Ohio State University College of Dentistry Columbus Ohio USA
3 shared publications - Daizo Ishiguro
Department of Prosthodontics Indiana University School of Dentistry Indianapolis Indiana USA
2 shared publications
Latest Publications
- 27 August 2026
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 136 (5) , 1241-1247
Interimplant distance and angulation measurement from CAD-generated multiunit abutment interfaces: A scan body–independent technique
- 27 August 2026
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 136 (5) , 1241-1247
Interimplant distance and angulation measurement from CAD-generated multiunit abutment interfaces: A scan body–independent technique
- Open Access
- 21 August 2026
- Published by Wiley in Journal of Prosthodontics
Effects of scanner type and prosthesis design–luting protocol combinations on the passive fit of interim implant‐supported complete‐arch fixed dental prostheses
Purpose: To evaluate the effects of scanner type and prosthesis design–luting protocol combinations on the passive fit of interim implant‐supported complete‐arch fixed dental prostheses (ISCFDPs) fabricated using a non‐calibrated splinting grammetry system (OptiSplint). The null hypothesis was that scanner type and prosthesis design–luting protocol combinations would not affect the passive fit of interim ISCFDPs. Materials and Methods: This in vitro 2 × 3 factorial study utilized a maxillary edentulous FP‐3 master cast with 4 multiunit abutment (MUA) analogs. Extraoral scans of the OptiSplint assembly were obtained using either an intraoral scanner (IOS‐OptiSplint) or a laboratory scanner (Lab‐OptiSplint). Each scanning method was combined with each of the three prosthesis design–luting protocol combinations: (1) Ti‐base with freehand cementation, (2) Ti‐base cementation on a verification cast, and (3) Direct‐to‐MUA design, resulting in six experimental groups ( n = 10 per group; N = 60). All prostheses were milled from pre‐polymerized polymethylmethacrylate (PMMA) pucks using a five‐axis milling unit. All PMMA ISCFDPs were evaluated for passive fit on the master cast using the screw‐resistance test by two calibrated examiners, with discrepancies resolved by a third. Misfit was determined when incomplete seating or abnormal resistance was detected during sequential screw tightening. Inter‐examiner reliability was assessed using Cohen's kappa, and misfit rates were compared via Fisher's exact tests ( α = 0.05). Results: Inter‐examiner agreement was excellent (98%; κ = 0.95). Laboratory scanning achieved complete passive fit across all three prosthesis design–luting protocol combinations. With the IOS workflow, Ti‐base on Cast demonstrated 0% misfit, Ti‐base Freehand exhibited 30% misfit, and Direct‐to‐MUA demonstrated 100% misfit. Group 3 exhibited a significantly higher misfit frequency than all other groups ( p < 0.001), whereas no other pairwise comparisons were significant. Conclusion: Laboratory scanning of a non‐calibrated splinting grammetry system was associated with consistently complete passive fit across all groups. It may provide a predictable approach for achieving passive fit in complete‐arch interim prostheses. Extraoral scanning with an intraoral scanner yielded variable results, underscoring the value of verification‐cast cementation when using Ti‐bases. Within the limitations of this study, the results suggest that Direct‐to‐MUA workflows may require laboratory‐based scanning when using the evaluated systems.
- 21 August 2026
- Published by Wiley in Journal of Prosthodontics
Open AccessEffects of scanner type and prosthesis design–luting protocol combinations on the passive fit of interim implant‐supported complete‐arch fixed dental prostheses
Purpose: To evaluate the effects of scanner type and prosthesis design–luting protocol combinations on the passive fit of interim implant‐supported complete‐arch fixed dental prostheses (ISCFDPs) fabricated using a non‐calibrated splinting grammetry system (OptiSplint). The null hypothesis was that scanner type and prosthesis design–luting protocol combinations would not affect the passive fit of interim ISCFDPs. Materials and Methods: This in vitro 2 × 3 factorial study utilized a maxillary edentulous FP‐3 master cast with 4 multiunit abutment (MUA) analogs. Extraoral scans of the OptiSplint assembly were obtained using either an intraoral scanner (IOS‐OptiSplint) or a laboratory scanner (Lab‐OptiSplint). Each scanning method was combined with each of the three prosthesis design–luting protocol combinations: (1) Ti‐base with freehand cementation, (2) Ti‐base cementation on a verification cast, and (3) Direct‐to‐MUA design, resulting in six experimental groups ( n = 10 per group; N = 60). All prostheses were milled from pre‐polymerized polymethylmethacrylate (PMMA) pucks using a five‐axis milling unit. All PMMA ISCFDPs were evaluated for passive fit on the master cast using the screw‐resistance test by two calibrated examiners, with discrepancies resolved by a third. Misfit was determined when incomplete seating or abnormal resistance was detected during sequential screw tightening. Inter‐examiner reliability was assessed using Cohen's kappa, and misfit rates were compared via Fisher's exact tests ( α = 0.05). Results: Inter‐examiner agreement was excellent (98%; κ = 0.95). Laboratory scanning achieved complete passive fit across all three prosthesis design–luting protocol combinations. With the IOS workflow, Ti‐base on Cast demonstrated 0% misfit, Ti‐base Freehand exhibited 30% misfit, and Direct‐to‐MUA demonstrated 100% misfit. Group 3 exhibited a significantly higher misfit frequency than all other groups ( p < 0.001), whereas no other pairwise comparisons were significant. Conclusion: Laboratory scanning of a non‐calibrated splinting grammetry system was associated with consistently complete passive fit across all groups. It may provide a predictable approach for achieving passive fit in complete‐arch interim prostheses. Extraoral scanning with an intraoral scanner yielded variable results, underscoring the value of verification‐cast cementation when using Ti‐bases. Within the limitations of this study, the results suggest that Direct‐to‐MUA workflows may require laboratory‐based scanning when using the evaluated systems.
- Open Access
- 8 June 2026
- Published by MDPI AG in Dentistry Journal
- Vol. 14 (6) , 350
Conversion Techniques for Immediate-Loading Interim Implant-Supported Complete-Arch Fixed Dental Prostheses (ISCFDPs): Four Clinical Reports
Background/Objectives: Immediate-loading interim implant-supported complete-arch fixed dental prostheses (ISCFDPs) are widely used for immediate loading in edentulous patients. Although traditional denture conversion techniques are well established, newer systems aim to improve efficiency and prosthesis integrity. This clinical report aims to describe and compare four chairside conversion techniques for immediate-loading interim ISCFDPs. Methods: Four clinical cases were treated using different conversion techniques, including conventional denture conversion, guided conversion with static computer-assisted implant surgery (s-CAIS), and two closed-mouth pickup systems (SMART Denture Conversion and EasyPro). Clinical workflows, procedural characteristics, and prosthetic considerations were evaluated. Results: All techniques enabled the successful fabrication of immediate-loaded interim ISCFDPs. Conventional conversion was flexible and cost-effective but technique-sensitive and associated with increased risk of prosthesis weakening. Guided conversion improved structural integrity and reduced intraoral adjustment but required precise planning and higher costs. Closed-mouth systems preserved occlusion, minimized denture modification, and reduced chairside time, though they relied on proprietary components and had limited clinical evidence. Conclusions: Each conversion technique presents distinct advantages and limitations. Selection should be based on clinical conditions, available resources, and clinician experience. Further studies are needed to validate the long-term outcomes of emerging conversion systems.
- 8 June 2026
- Published by MDPI AG in Dentistry Journal
- Vol. 14 (6) , 350
Open AccessConversion Techniques for Immediate-Loading Interim Implant-Supported Complete-Arch Fixed Dental Prostheses (ISCFDPs): Four Clinical Reports
Background/Objectives: Immediate-loading interim implant-supported complete-arch fixed dental prostheses (ISCFDPs) are widely used for immediate loading in edentulous patients. Although traditional denture conversion techniques are well established, newer systems aim to improve efficiency and prosthesis integrity. This clinical report aims to describe and compare four chairside conversion techniques for immediate-loading interim ISCFDPs. Methods: Four clinical cases were treated using different conversion techniques, including conventional denture conversion, guided conversion with static computer-assisted implant surgery (s-CAIS), and two closed-mouth pickup systems (SMART Denture Conversion and EasyPro). Clinical workflows, procedural characteristics, and prosthetic considerations were evaluated. Results: All techniques enabled the successful fabrication of immediate-loaded interim ISCFDPs. Conventional conversion was flexible and cost-effective but technique-sensitive and associated with increased risk of prosthesis weakening. Guided conversion improved structural integrity and reduced intraoral adjustment but required precise planning and higher costs. Closed-mouth systems preserved occlusion, minimized denture modification, and reduced chairside time, though they relied on proprietary components and had limited clinical evidence. Conclusions: Each conversion technique presents distinct advantages and limitations. Selection should be based on clinical conditions, available resources, and clinician experience. Further studies are needed to validate the long-term outcomes of emerging conversion systems.
- Open Access
- 23 October 2025
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 38 (2) , 201-209
Management of a Staged Approach in an Implant‐Supported Complete‐Arch Fixed Dental Prosthesis ( ISCFDP ) With a Long Term, Long Span Fixed Provisional Prosthesis, Leveraging a Full Digital Approach: A Case Report
Objectives: To describe the clinical implementation of a staged approach using strategically selected abutment teeth, a cobalt‐chromium‐reinforced long‐span provisional prosthesis, and a fully digital workflow for maxillary FP‐2 full‐arch rehabilitation. Overview: A 48‐year‐old male with advanced periodontal disease underwent a staged full‐arch implant rehabilitation. Maxillary canines and first molars were preserved to support a long‐span fixed provisional prosthesis. A fully digital workflow was employed, including CBCT, intraoral scanning, and photogrammetry. A cobalt‐chromium framework reinforced the provisional prosthesis, enhancing strength and stability during the healing period. Following soft tissue maturation, a definitive zirconia prosthesis was digitally designed and delivered with minimal adjustment. Conclusion: This case highlights the value of a strategically staged approach that preserves key abutment teeth and incorporates a robust digital workflow. The method enabled precise implant placement, improved prosthetic predictability, and optimized esthetic and functional outcomes.
- 23 October 2025
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 38 (2) , 201-209
Open AccessManagement of a Staged Approach in an Implant‐Supported Complete‐Arch Fixed Dental Prosthesis ( ISCFDP ) With a Long Term, Long Span Fixed Provisional Prosthesis, Leveraging a Full Digital Approach: A Case Report
Objectives: To describe the clinical implementation of a staged approach using strategically selected abutment teeth, a cobalt‐chromium‐reinforced long‐span provisional prosthesis, and a fully digital workflow for maxillary FP‐2 full‐arch rehabilitation. Overview: A 48‐year‐old male with advanced periodontal disease underwent a staged full‐arch implant rehabilitation. Maxillary canines and first molars were preserved to support a long‐span fixed provisional prosthesis. A fully digital workflow was employed, including CBCT, intraoral scanning, and photogrammetry. A cobalt‐chromium framework reinforced the provisional prosthesis, enhancing strength and stability during the healing period. Following soft tissue maturation, a definitive zirconia prosthesis was digitally designed and delivered with minimal adjustment. Conclusion: This case highlights the value of a strategically staged approach that preserves key abutment teeth and incorporates a robust digital workflow. The method enabled precise implant placement, improved prosthetic predictability, and optimized esthetic and functional outcomes.
- Open Access
- 5 September 2025
- Published by Wiley in Journal of Prosthodontics
A digital workflow for full‐arch implant fixed prosthesis: Clinical application of a 3D‐printed polychromatic flangeless trial denture, anatomic bone reduction guide, and intraoral scanning for definitive prosthesis fabrication
This clinical report presents a comprehensive digital workflow for rehabilitating a patient with maxillary terminal dentition using a full‐arch, implant‐supported fixed dental prosthesis (FP‐1). It highlights the integration of a 3D‐printed polychromatic flangeless trial denture and a customized anatomic bone reduction template, enabling prosthetically driven implant planning and optimal bone architecture modification. The workflow incorporated fully guided implant surgery using sequential templates and immediate loading with a closed‐mouth pickup system. Intraoral scanning protocols were employed for definitive prosthesis fabrication. This approach addressed high esthetic risks while achieving surgical precision, efficient treatment execution, and favorable clinical outcomes.
- 5 September 2025
- Published by Wiley in Journal of Prosthodontics
Open AccessA digital workflow for full‐arch implant fixed prosthesis: Clinical application of a 3D‐printed polychromatic flangeless trial denture, anatomic bone reduction guide, and intraoral scanning for definitive prosthesis fabrication
This clinical report presents a comprehensive digital workflow for rehabilitating a patient with maxillary terminal dentition using a full‐arch, implant‐supported fixed dental prosthesis (FP‐1). It highlights the integration of a 3D‐printed polychromatic flangeless trial denture and a customized anatomic bone reduction template, enabling prosthetically driven implant planning and optimal bone architecture modification. The workflow incorporated fully guided implant surgery using sequential templates and immediate loading with a closed‐mouth pickup system. Intraoral scanning protocols were employed for definitive prosthesis fabrication. This approach addressed high esthetic risks while achieving surgical precision, efficient treatment execution, and favorable clinical outcomes.
- Open Access
- 3 August 2025
- Published by Wiley in Journal of Prosthodontics
Technique for retrieving a locked implant‐supported bar overdenture following direct attachment pick‐up procedure
Implant‐assisted complete dentures, particularly those utilizing implant‐supported bar systems (RP‐4), offer significant advantages in patient satisfaction and prosthetic function compared to conventional dentures. However, complications can arise during the direct intraoral pick‐up procedure, such as inadvertent resin polymerization in undercut areas, which may lock the overdenture in place. This report introduces a predictable, digitally guided technique to retrieve a locked implant‐supported bar overdenture using the original digital design to locate screw access channels and guide targeted occlusal drilling. The method enables the removal of the prosthesis with minimal damage, allowing for chairside repair without the need to remake the denture. This approach enhances the management of such complications and aligns with modern digital workflows in prosthodontics.
- 3 August 2025
- Published by Wiley in Journal of Prosthodontics
Open AccessTechnique for retrieving a locked implant‐supported bar overdenture following direct attachment pick‐up procedure
Implant‐assisted complete dentures, particularly those utilizing implant‐supported bar systems (RP‐4), offer significant advantages in patient satisfaction and prosthetic function compared to conventional dentures. However, complications can arise during the direct intraoral pick‐up procedure, such as inadvertent resin polymerization in undercut areas, which may lock the overdenture in place. This report introduces a predictable, digitally guided technique to retrieve a locked implant‐supported bar overdenture using the original digital design to locate screw access channels and guide targeted occlusal drilling. The method enables the removal of the prosthesis with minimal damage, allowing for chairside repair without the need to remake the denture. This approach enhances the management of such complications and aligns with modern digital workflows in prosthodontics.
- Open Access
- 3 August 2025
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 38 (4) , 753-763
Interdisciplinary Management of Open Interproximal Embrasures
Objectives: To describe key etiological and risk factors associated with open interproximal embrasures (OIE) and propose a systematic interdisciplinary approach for their management, emphasizing the integration of periodontics, orthodontics, and prosthodontics. Overview: Optimal esthetics and function are priority outcomes in contemporary dentistry, often necessitating an interdisciplinary approach to achieve satisfactory results. OIE, commonly referred to as “black triangles,” result from the loss of interdental papillary height due to a variety of factors such as unfavorable bone crest‐to‐contact point distance, interproximal width, gingival thickness, tooth form, and axial root inclination. Their prevalence and clinical presentation may be influenced by age, history of orthodontic or periodontal treatment, and tooth morphology. Comprehensive diagnostic protocols and treatment strategies for the management of OIE may involve periodontal regeneration, soft tissue augmentation, orthodontic alignment, and restorative procedures, as demonstrated in this article. Conclusion: A structured, patient‐specific interdisciplinary approach emphasizing both “pink” (soft tissue) and “white” (tooth structure) esthetics is essential for effectively treating OIE, ultimately improving patient satisfaction and quality of life. Future clinical research should focus on evaluating the efficacy of various interdisciplinary treatment strategies. Clinical Significance: This article underscores the importance of interdisciplinary collaboration in managing OIE to optimize esthetics and function, ultimately enhancing patient satisfaction and quality of life.
- 3 August 2025
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 38 (4) , 753-763
Open AccessInterdisciplinary Management of Open Interproximal Embrasures
Objectives: To describe key etiological and risk factors associated with open interproximal embrasures (OIE) and propose a systematic interdisciplinary approach for their management, emphasizing the integration of periodontics, orthodontics, and prosthodontics. Overview: Optimal esthetics and function are priority outcomes in contemporary dentistry, often necessitating an interdisciplinary approach to achieve satisfactory results. OIE, commonly referred to as “black triangles,” result from the loss of interdental papillary height due to a variety of factors such as unfavorable bone crest‐to‐contact point distance, interproximal width, gingival thickness, tooth form, and axial root inclination. Their prevalence and clinical presentation may be influenced by age, history of orthodontic or periodontal treatment, and tooth morphology. Comprehensive diagnostic protocols and treatment strategies for the management of OIE may involve periodontal regeneration, soft tissue augmentation, orthodontic alignment, and restorative procedures, as demonstrated in this article. Conclusion: A structured, patient‐specific interdisciplinary approach emphasizing both “pink” (soft tissue) and “white” (tooth structure) esthetics is essential for effectively treating OIE, ultimately improving patient satisfaction and quality of life. Future clinical research should focus on evaluating the efficacy of various interdisciplinary treatment strategies. Clinical Significance: This article underscores the importance of interdisciplinary collaboration in managing OIE to optimize esthetics and function, ultimately enhancing patient satisfaction and quality of life.
- Open Access
- 6 July 2025
- Published by Wiley in Journal of Prosthodontics
Influence of prosthesis type and intraoral scanner‐based extraoral scanning protocol on the passive fit of CAD‐CAM verification devices
Purpose: To evaluate the impact of different complete‐arch digital scanning techniques and prosthesis types on the passive fit of computer‐aided design and computer‐aided manufacturing (CAD‐CAM) verification devices.Materials and Methods: Two different maxillary master casts with four multi‐unit abutment (MUA) implant analogs (FP‐1 and FP‐3 prosthesis types) were used as the basis for fabricating verification devices through two impression techniques (OptiSplint and RevEX). Group 1 utilized digital scans of splinted scanbodies reinforced with a light‐polymerizing acrylic resin and metal mesh on the FP‐1 cast (OptiSplint technique), Group 2 employed the same impression technique as Group 1 on the FP‐3 cast, Group 3 applied digital scans of reverse scanbodies connected to a passively fitting interim prosthesis on FP‐1 cast (RevEX technique), and Group 4 used the same impression technique as Group 3 on FP‐3 cast. A total of 40 milled verification devices were fabricated, with 10 devices allocated to each group. The misfit of verification devices was assessed using visual inspection, tactile sensation, and a one‐screw test, with any disagreements between the two primary examiners resolved by a third evaluator. Agreement between the clinicians was assessed using Cohen's kappa statistics and percent agreement. The percentage of misfits was calculated for each group and compared between groups using Fisher's exact tests (α = 0.05).Results: The misfit analysis showed the lowest misfit (10%) in Group 1 (OptiSplint‐FP1), followed by Groups 3 (RevEX‐FP1) and 4 (RevEX‐FP3) at 20%, and the highest (40%) in Group 2 (OptiSplint‐FP3), with no significant differences between groups by Fisher's exact tests (p > 0.05). Odds ratios indicated six times higher misfit odds for FP‐3 than FP‐1 with OptiSplint, no difference for FP‐1 versus FP‐3 with RevEX (odds ratio = 1.0), and lower odds with RevEX compared to OptiSplint under FP‐3 conditions (odds ratio = 0.375). Inter‐examiner agreement was strong, with 90% concordance and a Kappa statistic of 0.66, demonstrating substantial consistency.Conclusion: OptiSplint is preferable for FP1 cases, whereas RevEX suits FP3 cases when intraoral–scanner–based extraoral workflows are used. Despite these recommendations, misfits occurred in every group, suggesting that a verification cast may be prudent when adopting these newer scanning approaches. Clinicians should consider fabricating an additional verification cast with splinted scanbodies or a clinically satisfactory interim implant prosthesis. This cast can confirm implant positions whenever modern scanbodies such as OptiSplint or RevEX are incorporated into the workflow.
- 6 July 2025
- Published by Wiley in Journal of Prosthodontics
Open AccessInfluence of prosthesis type and intraoral scanner‐based extraoral scanning protocol on the passive fit of CAD‐CAM verification devices
Purpose: To evaluate the impact of different complete‐arch digital scanning techniques and prosthesis types on the passive fit of computer‐aided design and computer‐aided manufacturing (CAD‐CAM) verification devices.Materials and Methods: Two different maxillary master casts with four multi‐unit abutment (MUA) implant analogs (FP‐1 and FP‐3 prosthesis types) were used as the basis for fabricating verification devices through two impression techniques (OptiSplint and RevEX). Group 1 utilized digital scans of splinted scanbodies reinforced with a light‐polymerizing acrylic resin and metal mesh on the FP‐1 cast (OptiSplint technique), Group 2 employed the same impression technique as Group 1 on the FP‐3 cast, Group 3 applied digital scans of reverse scanbodies connected to a passively fitting interim prosthesis on FP‐1 cast (RevEX technique), and Group 4 used the same impression technique as Group 3 on FP‐3 cast. A total of 40 milled verification devices were fabricated, with 10 devices allocated to each group. The misfit of verification devices was assessed using visual inspection, tactile sensation, and a one‐screw test, with any disagreements between the two primary examiners resolved by a third evaluator. Agreement between the clinicians was assessed using Cohen's kappa statistics and percent agreement. The percentage of misfits was calculated for each group and compared between groups using Fisher's exact tests (α = 0.05).Results: The misfit analysis showed the lowest misfit (10%) in Group 1 (OptiSplint‐FP1), followed by Groups 3 (RevEX‐FP1) and 4 (RevEX‐FP3) at 20%, and the highest (40%) in Group 2 (OptiSplint‐FP3), with no significant differences between groups by Fisher's exact tests (p > 0.05). Odds ratios indicated six times higher misfit odds for FP‐3 than FP‐1 with OptiSplint, no difference for FP‐1 versus FP‐3 with RevEX (odds ratio = 1.0), and lower odds with RevEX compared to OptiSplint under FP‐3 conditions (odds ratio = 0.375). Inter‐examiner agreement was strong, with 90% concordance and a Kappa statistic of 0.66, demonstrating substantial consistency.Conclusion: OptiSplint is preferable for FP1 cases, whereas RevEX suits FP3 cases when intraoral–scanner–based extraoral workflows are used. Despite these recommendations, misfits occurred in every group, suggesting that a verification cast may be prudent when adopting these newer scanning approaches. Clinicians should consider fabricating an additional verification cast with splinted scanbodies or a clinically satisfactory interim implant prosthesis. This cast can confirm implant positions whenever modern scanbodies such as OptiSplint or RevEX are incorporated into the workflow.
- Open Access
- 20 May 2025
- Published by MDPI AG in Dentistry Journal
- Vol. 13 (5) , 220
Color Stability, Surface Gloss, Surface Roughness, and Wettability of Material Jetting 3D-Printed Denture Material Under Various Surface Treatments
Objectives: To examine the effects of surface treatments on the color stability, surface roughness, surface gloss, and wettability of monolithic polychromatic material jetting (MJT) 3D-printed denture material. Material and Methods: Twenty-one color variants of the same denture material (TrueDent; Stratasys, Eden, MN, USA) underwent two surface treatments (polishing only or polishing and glazing), creating 42 study groups with a total of 420 samples (n = 10 per group). The samples were manufactured using a PolyJet 3D printer (J5 DentaJet; Stratasys, Eden, MN, USA), a type of MJT 3D printer. Color measurements were taken with a digital spectrophotometer before and after the surface treatments, and quantitative color differences (ΔE00 and ΔC*) were calculated using the CIE2000 system. Comparisons of ΔE00 were made against the 50%:50% acceptability threshold (AT) of 1.8 and the 50%:50% perceptibility threshold (PT) of 0.8 for tooth shade, as well as the 50%:50% PT of 1.72 and the 50%:50% AT of 4.08 for gingival (pink) shade. After surface treatment, the gloss was measured using a glossmeter, surface roughness was measured with optical profilometry, and wettability was measured by contact angle measurements using an optical tensiometer. The significance of surface treatment on color changes for each color variant was evaluated using one-sided, one-sample t-tests against the AT and PT. The effects of surface treatment on surface gloss, surface roughness, contact angle, and ΔC* were analyzed using t-tests for each color variant. Pairwise comparisons between groups were made using Fisher’s Protected Least Significant Differences (α = 0.05). Results: In most cases, glazing caused the color change (ΔE00) to exceed the AT and PT, with a few exceptions. Most materials exhibited a more vibrant (more saturated) appearance and statistically higher chroma, with glazed surface treatments compared to polished ones, though there were some exceptions. For all materials, the glazed samples had significantly higher gloss units than the polished ones (p < 0.0001). Additionally, all materials showed significantly higher surface roughness in glazed samples compared to polished ones (p < 0.0001 for most). The polished samples had significantly higher contact angles (p < 0.0001 for most). Conclusions: Surface treatments significantly influenced the color, surface gloss, surface roughness, and wettability of MJT 3D-printed denture materials. Glazing led to increased chroma and gloss and produced more hydrophilic surfaces, although it also increased surface roughness. These results highlight the importance of surface treatment selection in optimizing the clinical performance of MJT-fabricated dentures.
- 20 May 2025
- Published by MDPI AG in Dentistry Journal
- Vol. 13 (5) , 220
Open AccessColor Stability, Surface Gloss, Surface Roughness, and Wettability of Material Jetting 3D-Printed Denture Material Under Various Surface Treatments
Objectives: To examine the effects of surface treatments on the color stability, surface roughness, surface gloss, and wettability of monolithic polychromatic material jetting (MJT) 3D-printed denture material. Material and Methods: Twenty-one color variants of the same denture material (TrueDent; Stratasys, Eden, MN, USA) underwent two surface treatments (polishing only or polishing and glazing), creating 42 study groups with a total of 420 samples (n = 10 per group). The samples were manufactured using a PolyJet 3D printer (J5 DentaJet; Stratasys, Eden, MN, USA), a type of MJT 3D printer. Color measurements were taken with a digital spectrophotometer before and after the surface treatments, and quantitative color differences (ΔE00 and ΔC*) were calculated using the CIE2000 system. Comparisons of ΔE00 were made against the 50%:50% acceptability threshold (AT) of 1.8 and the 50%:50% perceptibility threshold (PT) of 0.8 for tooth shade, as well as the 50%:50% PT of 1.72 and the 50%:50% AT of 4.08 for gingival (pink) shade. After surface treatment, the gloss was measured using a glossmeter, surface roughness was measured with optical profilometry, and wettability was measured by contact angle measurements using an optical tensiometer. The significance of surface treatment on color changes for each color variant was evaluated using one-sided, one-sample t-tests against the AT and PT. The effects of surface treatment on surface gloss, surface roughness, contact angle, and ΔC* were analyzed using t-tests for each color variant. Pairwise comparisons between groups were made using Fisher’s Protected Least Significant Differences (α = 0.05). Results: In most cases, glazing caused the color change (ΔE00) to exceed the AT and PT, with a few exceptions. Most materials exhibited a more vibrant (more saturated) appearance and statistically higher chroma, with glazed surface treatments compared to polished ones, though there were some exceptions. For all materials, the glazed samples had significantly higher gloss units than the polished ones (p < 0.0001). Additionally, all materials showed significantly higher surface roughness in glazed samples compared to polished ones (p < 0.0001 for most). The polished samples had significantly higher contact angles (p < 0.0001 for most). Conclusions: Surface treatments significantly influenced the color, surface gloss, surface roughness, and wettability of MJT 3D-printed denture materials. Glazing led to increased chroma and gloss and produced more hydrophilic surfaces, although it also increased surface roughness. These results highlight the importance of surface treatment selection in optimizing the clinical performance of MJT-fabricated dentures.
- Open Access
- 27 December 2024
- Published by MDPI AG in Dentistry Journal
- Vol. 13 (1) , 13
Race to the Moon or the Bottom? Applications, Performance, and Ethical Considerations of Artificial Intelligence in Prosthodontics and Implant Dentistry
Objectives: This review aims to explore the applications of artificial intelligence (AI) in prosthodontics and implant dentistry, focusing on its performance outcomes and associated ethical concerns. Materials and Methods: Following the PRISMA guidelines, a search was conducted across databases such as PubMed, Medline, Web of Science, and Scopus. Studies published between January 2022 and May 2024, in English, were considered. The Population (P) included patients or extracted teeth with AI applications in prosthodontics and implant dentistry; the Intervention (I) was AI-based tools; the Comparison (C) was traditional methods, and the Outcome (O) involved AI performance outcomes and ethical considerations. The Newcastle–Ottawa Scale was used to assess the quality and risk of bias in the studies. Results: Out of 3420 initially identified articles, 18 met the inclusion criteria for AI applications in prosthodontics and implant dentistry. The review highlighted AI’s significant role in improving diagnostic accuracy, treatment planning, and prosthesis design. AI models demonstrated high accuracy in classifying dental implants and predicting implant outcomes, although limitations were noted in data diversity and model generalizability. Regarding ethical issues, five studies identified concerns such as data privacy, system bias, and the potential replacement of human roles by AI. While patients generally viewed AI positively, dental professionals expressed hesitancy due to a lack of familiarity and regulatory guidelines, highlighting the need for better education and ethical frameworks. Conclusions: AI has the potential to revolutionize prosthodontics and implant dentistry by enhancing treatment accuracy and efficiency. However, there is a pressing need to address ethical issues through comprehensive training and the development of regulatory frameworks. Future research should focus on broadening AI applications and addressing the identified ethical concerns.
- 27 December 2024
- Published by MDPI AG in Dentistry Journal
- Vol. 13 (1) , 13
Open AccessRace to the Moon or the Bottom? Applications, Performance, and Ethical Considerations of Artificial Intelligence in Prosthodontics and Implant Dentistry
Objectives: This review aims to explore the applications of artificial intelligence (AI) in prosthodontics and implant dentistry, focusing on its performance outcomes and associated ethical concerns. Materials and Methods: Following the PRISMA guidelines, a search was conducted across databases such as PubMed, Medline, Web of Science, and Scopus. Studies published between January 2022 and May 2024, in English, were considered. The Population (P) included patients or extracted teeth with AI applications in prosthodontics and implant dentistry; the Intervention (I) was AI-based tools; the Comparison (C) was traditional methods, and the Outcome (O) involved AI performance outcomes and ethical considerations. The Newcastle–Ottawa Scale was used to assess the quality and risk of bias in the studies. Results: Out of 3420 initially identified articles, 18 met the inclusion criteria for AI applications in prosthodontics and implant dentistry. The review highlighted AI’s significant role in improving diagnostic accuracy, treatment planning, and prosthesis design. AI models demonstrated high accuracy in classifying dental implants and predicting implant outcomes, although limitations were noted in data diversity and model generalizability. Regarding ethical issues, five studies identified concerns such as data privacy, system bias, and the potential replacement of human roles by AI. While patients generally viewed AI positively, dental professionals expressed hesitancy due to a lack of familiarity and regulatory guidelines, highlighting the need for better education and ethical frameworks. Conclusions: AI has the potential to revolutionize prosthodontics and implant dentistry by enhancing treatment accuracy and efficiency. However, there is a pressing need to address ethical issues through comprehensive training and the development of regulatory frameworks. Future research should focus on broadening AI applications and addressing the identified ethical concerns.