JOJoão Victor B. L. Oliveira

João Victor B. L. Oliveira

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


João Victor B. L. Oliveira has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Use of Steel Industry Waste in Mortars for Application in Buildings: A Sustainable Alternative Analyzed by Microstructural, Chemical, and Mechanical Characterization

    by Ana Laura M. Amorim, João Victor B. L. Oliveira, Rebecca Caroline M. Coelho, Bruno S. Teti, Esdras C. Costa, Nathan B. Lima, Kleber G. B. Alves, Nathalia B. D. Lima

    Civil construction is considered one of the industries with the most significant environmental impact. In this sense, the main goal of this study was to investigate three different mortar sets incorporating industrial lamination waste, assessing their chemical, physical, and microstructural properties, as well as their mechanical performance to develop sustainable mortars. Cylindrical and prismatic specimens were produced using various incorporation methods: reference mortar, mortars with mill scale addition, partial replacement of cement with mill scale residue, and partial replacement of sand with residue, at proportions of 10%, 20%, 30%, 40%, and 50%. In addition, X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) analyses were performed. Physical and mechanical tests included those for bulk density, consistency index, water absorption by capillarity, axial compressive strength, and flexural tensile strength. XRF analyses showed an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD analyses confirmed the presence of compounds such as alite and portlandite, which are common in cementitious mortars. FTIR spectra confirmed the presence of functional groups through absorption bands associated with Si–O stretching. SEM images showed slight morphological changes in the composites as the amount of industrial lamination waste increased. The addition of industrial lamination waste affected the spread index and density of the mixtures, while water absorption by capillarity decreased in some formulations with mill scale. Concerning mechanical performance, the strength of the mortars varied with increasing amounts of industrial lamination waste.


  • Open Access

    Sustainable Mortars Incorporating Industrial Rolling Mill Residues: Microstructural, Physical, and Chemical Characteristics

    by Ana Laura M. Amorim, João Victor B. L. Oliveira, Rebecca Caroline M. Coelho, Bruno S. Teti, Esdras C. Costa, Nathan B. Lima, Kleber G. B. Alves, Nathalia B. D. Lima

    New alternatives in the construction industry are essential for economic, sustainable, and environmental progress. In this context, this work investigated three sets of sustainable mortars incorporating industrial lamination waste, assessing their chemical, physical, microstructural, and mechanical properties to inform their development. Cylindrical and prismatic specimens were produced using the following incorporation methods: a reference mortar, mortars with mill scale addition, partial cement replacement with mill scale, and partial sand replacement with mill scale, at proportions of 10%, 20%, 30%, 40%, and 50%. Additionally, analyses including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) were performed. Physical and mechanical tests, including bulk density, consistency index, capillary water absorption, axial compressive strength, and flexural tensile strength, were also conducted. XRF results indicated an increase in iron oxide content and a decrease in calcium oxide with the addition of mill scale. XRD confirmed the presence of compounds, such as alite and portlandite, which are common in cementitious mortars. FTIR spectra exhibited characteristic functional groups through absorption bands related to Si–O stretching. SEM micrographs revealed slight morphological changes in the composites as the quantity of industrial lamination waste increased, and EDS data supported the XRF findings. The addition of industrial lamination waste affected the spread index and density of the mixtures, while capillary water absorption decreased in some formulations with mill scale. The strength of the mortars increased with the incorporation of industrial lamination waste. In conclusion, using industrial lamination waste in mortars is a technically and environmentally feasible alternative that aligns with the principles of sustainable development and the circular economy in the construction industry.