Yohei Morishita

This work presents a D-band high-power-density four-element phased-array transceiver for 6G user equipment (UE). Conventional designs require large multi-stage LO generation circuits for D-band up/down conversion, making it difficult to achieve compact size and low-power consumption. To address this, we propose an integrated LO chain using an injection-locked tripling phase shifter (ILTPS), which enables both frequency tripling and phase shifting within a single circuit without multi-stage amplifiers. The ILTPS achieves an area of 0.088 mm² and a power consumption of 15 mW. In addition, to realize high power density, the transceiver integrates a bi-active sub-harmonic mixer (BA-SHM) and a D-band PA/LNA with PA-sharing TDD switching. An eight-element antenna-in-package (AiP) module using two transceiver ICs operates in the 142–164-GHz frequency range, achieving an EIRP of 25.7 dBm and a maximum data rate of 56 Gbps. The power consumption per element is 150 mW in TX mode and 93 mW in RX mode with 1 V VDD. The active area of this transceiver is 8.5 mm², and it is implemented using a 65 nm CMOS process.

Sub-terahertz (Sub-THz) communication systems are a promising technology for next-generation high-speed, high-capacity wireless networks. Achieving this requires highly integrated antenna-in-package (AiP) solutions combining antennas and radio frequency integrated circuits (RFICs). However, high-frequency operation and dense integration increase RFIC heat density, potentially degrading AiP performance and reliability. This article proposes a sub-THz AiP with both excellent RF and thermal performance. The design features a multilayer antenna structure on a low-loss dielectric substrate, minimizing RFIC-to-antenna connections and radiating toward the substrate edge. A dual-sided heat dissipation structure is also introduced for efficient thermal management in stacked configurations. Validation through simulations and measurements confirmed good reflection characteristics ( $\vert $ S $11\vert \lt $ –10 dB), 15 dBi gain, and thermal resistance below 4.1 K/W. 2-D beam steering was also demonstrated, highlighting the effectiveness of the proposed co-design approach.

To realize the practical application of sub-THz band wireless communication toward 6G, it is necessary to develop AiP modules with compact size and low cost. This letter discusses the design of a miniaturized AiP module for high-speed wireless communication targeting extended reality (XR) applications in medical operating rooms as an example of 6G use cases. By integrating waveguide antenna array along with a compact divider/combiner within the multilayer substrates, the module achieves a small form factor of $8.42\times 20.0\times 1.37$ mm while integrating radio frequency integrated circuit (RFIC) and peripheral surface mount components. The measurement shows a data rate of 40 Gb/s at a 3 m distance in the 150 GHz band with an excellent transmission energy efficiency of 35.7 pJ/bit.