Chenbo Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chenbo Yu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Jingtao Xin
Key Laboratory of the Ministry of Education for Optoelectronic Measurement Technology and Instrument, Beijing Information Science & Technology University, Beijing, China
6 shared publications Jingjing Liao
3 shared publications- Peng Tian
Key Laboratory of the Ministry of Education for Optoelectronic Measurement Technology and Instrument, Beijing Information Science and Technology University, Beijing, China
2 shared publications - Daoyu Tian
School of Instrumental Science and Optoelectronic Engineering, Beijing Information Science and Technology University, Beijing, China
1 shared publication - Jingjing Liao
School of Optoelectronic Measurement Technology and Instrument, Beijing Information Science & Technology University, Beijing, China
1 shared publication Kun Li
Beijing Laboratory of Optical Fiber Sensing and System, Beijing Information Science and Technology University, Beijing, China
1 shared publication
Latest Publications
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (7) , 10058-10067
Research on a High-Sensitivity FBG Tilt Sensor With Vibration Suppression
To address the susceptibility of conventional fiber Bragg grating (FBG) tilt sensors to external vibrations and temperature interference, this paper proposes a high-sensitivity FBG tilt sensor with integrated vibration suppression. The sensor is based on a flexible hinge structure and employs a non-contact magnetic damping mechanism to enhance vibration resistance. Additionally, it achieves high sensitivity and temperature compensation through a self-differential compensation method. First, a theoretical model of the sensor is derived based on dynamic response equations. Then, static structural optimization is performed using finite element analysis (FEA) to determine the optimal structural parameters. A coupled magnetic-mechanical field simulation is also conducted to validate the feasibility of vibration suppression using the magnetic damping mechanism. Based on the optimized parameters, the sensor is fabricated and packaged, followed by comprehensive performance testing. Experimental results show that within a tilt range of ±5°, the sensor achieves a sensitivity of 248.4 pm/°, a linearity coefficient of 0.9993, and a repeatability error of less than 1.716%. The differential FBG configuration effectively eliminates temperature induced errors in tilt measurement. Furthermore, vibration tests confirm that the magnetic damping mechanism significantly reduces measurement errors caused by external random vibrations. In summary, the FBG tilt sensor proposed in this study achieves vibration suppression and temperature compensation while maintaining high tilt measurement sensitivity, thereby enhancing the environmental adaptability of the tilt sensor and broadening its application scenarios.
- 24 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (7) , 10058-10067
Research on a High-Sensitivity FBG Tilt Sensor With Vibration Suppression
To address the susceptibility of conventional fiber Bragg grating (FBG) tilt sensors to external vibrations and temperature interference, this paper proposes a high-sensitivity FBG tilt sensor with integrated vibration suppression. The sensor is based on a flexible hinge structure and employs a non-contact magnetic damping mechanism to enhance vibration resistance. Additionally, it achieves high sensitivity and temperature compensation through a self-differential compensation method. First, a theoretical model of the sensor is derived based on dynamic response equations. Then, static structural optimization is performed using finite element analysis (FEA) to determine the optimal structural parameters. A coupled magnetic-mechanical field simulation is also conducted to validate the feasibility of vibration suppression using the magnetic damping mechanism. Based on the optimized parameters, the sensor is fabricated and packaged, followed by comprehensive performance testing. Experimental results show that within a tilt range of ±5°, the sensor achieves a sensitivity of 248.4 pm/°, a linearity coefficient of 0.9993, and a repeatability error of less than 1.716%. The differential FBG configuration effectively eliminates temperature induced errors in tilt measurement. Furthermore, vibration tests confirm that the magnetic damping mechanism significantly reduces measurement errors caused by external random vibrations. In summary, the FBG tilt sensor proposed in this study achieves vibration suppression and temperature compensation while maintaining high tilt measurement sensitivity, thereby enhancing the environmental adaptability of the tilt sensor and broadening its application scenarios.
- 17 November 2025
- Published by Elsevier in Measurement
- Vol. 259
A monolithic mid-high frequency high-sensitivity 2D FBG vibration sensor
- 17 November 2025
- Published by Elsevier in Measurement
- Vol. 259
A monolithic mid-high frequency high-sensitivity 2D FBG vibration sensor
- 10 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (20) , 38820-38828
Research on High-Sensitivity Fiber Bragg Grating Pressure Sensor Based on Diaphragm–Lever Composite Structure
In order to meet the demand for high-sensitivity pressure detection, this paper proposes a design method for a fiber Bragg grating (FBG) pressure sensor based on a diaphragm-lever composite structure. By constructing a diaphragm deformation-lever displacement amplification mechanism, the pressure sensitivity of the sensor is effectively improved. Firstly, a theoretical model for the transmission of pressure signal-diaphragm deformation displacement-lever displacement amplification-FBG strain wavelength shift is established. The sensor sensitivity is theoretically analyzed through a geometric model, and it is concluded that the theoretical amplification ratio of the diaphragm-lever composite structure is 3.464, with a sensitivity of 84.101 nm/MPa. Then, SolidWorks is used for sensor design and modeling, and the Ansys simulation platform is employed for iterative optimization to determine structural parameters such as grating diameter and length. Finite element analysis is used to simulate and calculate the amplification ratio and sensitivity, yielding a simulated amplification ratio of 3.229 and a sensitivity of 78.091 nm/MPa. These results are highly consistent with the theoretical analysis, verifying the reliability of the theoretical model. Finally, a physical sensor is fabricated according to the optimized structure, and packaging and testing systems are built to complete the characteristic testing of the sensor. Experimental results show that within the range of 0-0.1 MPa, the amplification ratio of the diaphragm-lever composite structure is 2.841, and the pressure sensitivity is 69.042 nm/MPa, which are basically consistent with the theoretical and simulation results. The linearity is 99.9%, and the repeatability error and hysteresis error are 1.160% and 0.623%, respectively.
- 10 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (20) , 38820-38828
Research on High-Sensitivity Fiber Bragg Grating Pressure Sensor Based on Diaphragm–Lever Composite Structure
In order to meet the demand for high-sensitivity pressure detection, this paper proposes a design method for a fiber Bragg grating (FBG) pressure sensor based on a diaphragm-lever composite structure. By constructing a diaphragm deformation-lever displacement amplification mechanism, the pressure sensitivity of the sensor is effectively improved. Firstly, a theoretical model for the transmission of pressure signal-diaphragm deformation displacement-lever displacement amplification-FBG strain wavelength shift is established. The sensor sensitivity is theoretically analyzed through a geometric model, and it is concluded that the theoretical amplification ratio of the diaphragm-lever composite structure is 3.464, with a sensitivity of 84.101 nm/MPa. Then, SolidWorks is used for sensor design and modeling, and the Ansys simulation platform is employed for iterative optimization to determine structural parameters such as grating diameter and length. Finite element analysis is used to simulate and calculate the amplification ratio and sensitivity, yielding a simulated amplification ratio of 3.229 and a sensitivity of 78.091 nm/MPa. These results are highly consistent with the theoretical analysis, verifying the reliability of the theoretical model. Finally, a physical sensor is fabricated according to the optimized structure, and packaging and testing systems are built to complete the characteristic testing of the sensor. Experimental results show that within the range of 0-0.1 MPa, the amplification ratio of the diaphragm-lever composite structure is 2.841, and the pressure sensitivity is 69.042 nm/MPa, which are basically consistent with the theoretical and simulation results. The linearity is 99.9%, and the repeatability error and hysteresis error are 1.160% and 0.623%, respectively.
- 25 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
Development of a Compact Triaxial FBG Vibration Sensor for Medium-High Frequency Applications via Multiobjective Optimization Design
This study presents a miniature triaxial fiber Bragg grating (FBG) vibration sensor incorporating a novel elliptical guide-angle hybrid flexure hinge structure for stepper motor vibration monitoring. To tackle the multi-objective optimization challenges associated with sensor miniaturization and sensitivity enhancement, we developed a theoretical model and employed response surface methodology (RSM) combined with a multi-objective genetic algorithm (MOGA) for parametric optimization. The validity of the proposed design was verified by finite element analysis (FEA) using ANSYS, through modal and harmonic response simulations. The sensor comprises three orthogonal assembled identical modules, achieving high spatial efficiency with compact dimensions of 20×20×20 mm³ and a mass of 41.47 g. Ultra-short small-diameter FBGs were packaged using a dual-point encapsulation technique. Experimental results indicated that the sensor presented natural frequencies of 1570 Hz (X-axis), 1600 Hz (Y-axis), and 1620 Hz (Z-axis), with corresponding sensitivities reaching 67.34 pm/G, 65.61 pm/G, and 63.48 pm/G, respectively. The operational flat frequency range 20 - 1000 Hz, with the cross-axis interference in non-operational axes below 4% of the primary axis. Real-time triaxial vibration monitoring of a stepper motor under varying conditions confirmed the sensor’s reliability and consistency in multi-degree-of-freedom measurements. With its compact size, high sensitivity, broad frequency range, electromagnetic immunity, and multi-point deployment capability, this sensor is highly applicable for multi-axis medium-to-high frequency vibration measurements in confined spaces within aerospace and mechanical equipment applications.
- 25 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
Development of a Compact Triaxial FBG Vibration Sensor for Medium-High Frequency Applications via Multiobjective Optimization Design
This study presents a miniature triaxial fiber Bragg grating (FBG) vibration sensor incorporating a novel elliptical guide-angle hybrid flexure hinge structure for stepper motor vibration monitoring. To tackle the multi-objective optimization challenges associated with sensor miniaturization and sensitivity enhancement, we developed a theoretical model and employed response surface methodology (RSM) combined with a multi-objective genetic algorithm (MOGA) for parametric optimization. The validity of the proposed design was verified by finite element analysis (FEA) using ANSYS, through modal and harmonic response simulations. The sensor comprises three orthogonal assembled identical modules, achieving high spatial efficiency with compact dimensions of 20×20×20 mm³ and a mass of 41.47 g. Ultra-short small-diameter FBGs were packaged using a dual-point encapsulation technique. Experimental results indicated that the sensor presented natural frequencies of 1570 Hz (X-axis), 1600 Hz (Y-axis), and 1620 Hz (Z-axis), with corresponding sensitivities reaching 67.34 pm/G, 65.61 pm/G, and 63.48 pm/G, respectively. The operational flat frequency range 20 - 1000 Hz, with the cross-axis interference in non-operational axes below 4% of the primary axis. Real-time triaxial vibration monitoring of a stepper motor under varying conditions confirmed the sensor’s reliability and consistency in multi-degree-of-freedom measurements. With its compact size, high sensitivity, broad frequency range, electromagnetic immunity, and multi-point deployment capability, this sensor is highly applicable for multi-axis medium-to-high frequency vibration measurements in confined spaces within aerospace and mechanical equipment applications.
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (12) , 21557-21565
Three-Axis High-Sensitivity Vibration Sensor Based on Ultrafine and Ultrashort Fiber Bragg Gratings
This article presents a three-axis high-sensitivity vibration sensor based on ultrafine and ultrashort fiber Bragg gratings (FBGs). A theoretical model for the sensor’s sensitivity and natural frequency is developed by deriving equations for steady-state torque balance. The effects of spring plate thickness, fiber diameter, and FBG packaging length on sensor performance are analyzed by this model. Results show that spring plate thickness has almost no impact, reducing fiber diameter improves sensitivity, and shortening FBG packaging length increases natural frequency. Therefore, based on the ultrafine and ultrashort FBGs, the sensor is 3-D modeled and fabricated. The performance of the sensor is verified through finite element analysis and experiments. The experimental results show that the natural frequencies of the sensor in X-, Y-, and Z-directions are 466, 477, and 445 Hz, respectively, with a working frequency band of 0–300 Hz, and sensitivities of 2258.4, 2240.8, and 2274.2 pm/g, respectively. The linearity in the three-axis directions reaches ${R}^{{2}}=0.9998$ , and the minimum acceleration resolution is about $95\mu $ g. The sensor’s performance, characterized by high sensitivity, wide bandwidth, and excellent three-axis consistency, offering valuable insights for high-sensitivity sensor designs.
- 28 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (12) , 21557-21565
Three-Axis High-Sensitivity Vibration Sensor Based on Ultrafine and Ultrashort Fiber Bragg Gratings
This article presents a three-axis high-sensitivity vibration sensor based on ultrafine and ultrashort fiber Bragg gratings (FBGs). A theoretical model for the sensor’s sensitivity and natural frequency is developed by deriving equations for steady-state torque balance. The effects of spring plate thickness, fiber diameter, and FBG packaging length on sensor performance are analyzed by this model. Results show that spring plate thickness has almost no impact, reducing fiber diameter improves sensitivity, and shortening FBG packaging length increases natural frequency. Therefore, based on the ultrafine and ultrashort FBGs, the sensor is 3-D modeled and fabricated. The performance of the sensor is verified through finite element analysis and experiments. The experimental results show that the natural frequencies of the sensor in X-, Y-, and Z-directions are 466, 477, and 445 Hz, respectively, with a working frequency band of 0–300 Hz, and sensitivities of 2258.4, 2240.8, and 2274.2 pm/g, respectively. The linearity in the three-axis directions reaches ${R}^{{2}}=0.9998$ , and the minimum acceleration resolution is about $95\mu $ g. The sensor’s performance, characterized by high sensitivity, wide bandwidth, and excellent three-axis consistency, offering valuable insights for high-sensitivity sensor designs.