Yang Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yang Liu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Jiao Zhao
College of Environmental Science and Engineering, Dalian Maritime University, Dalian 116026, China
2 shared publications - Yimin Zhu
Institute of Environmental Remediation, Dalian Maritime University, Dalian, China
2 shared publications - Yuwei Bao
College of Environmental Science and Engineering, Dalian Maritime University, Dalian 116026, China
2 shared publications - Hao Zhang
College of Environmental Science and Engineering, Dalian Maritime University, Dalian 116026, China
1 shared publication - Tie Li
College of Marine Electrical Engineering, Dalian Maritime University, Dalian 116026, China
1 shared publication - Xianmeng Liu
College of Environmental Science and Engineering, Dalian Maritime University, Dalian 116026, China
1 shared publication
Latest Publications
- Open Access
Regional Variations in Physicochemical Properties and Oil–Solid Interaction Mechanisms of Oily Sludge from Three Chinese Oilfields
Oily sludge is one of the most challenging solid wastes generated during petroleum production and wastewater treatment, posing long-term environmental risks and demanding effective resource-recovery strategies. This study systematically investigated the physicochemical characteristics, compositional differences, and oil–solid interaction mechanisms of oily sludge (OS) from three representative Chinese oilfields, Panjin, Daqing and Xinjiang, through integrated analyses of elemental composition, oil composition, X-ray diffractometer (XRD), Fourier-transform infrared (FT-IR), Gas chromatograph (GC), and Confocal laser scanning microscope (CLSM). The results revealed pronounced regional variations in oxidation degree, hydrocarbon composition, and mineralogy that critically influenced oil occurrence and removal behavior. The Panjin OS sample (PJ-OS) exhibited a high oxidation degree, enriched resins and asphaltenes, and compact film-like oil–solid structures, resulting in the lowest oil mobility and recovery potential. The Daqing OS (DQ-OS) was dominated by light saturates and showed the weakest oil–solid bonding, while the Xinjiang OS (XJ-OS) displayed moderate oxidation and intermediate properties. A novel room-temperature high-speed stirring cleaning method was applied to evaluate oil removal performance under ambient conditions. The residual oil contents after treatment were 4.43% (PJ-OS), 1.65% (DQ-OS), and 1.22% (XJ-OS), corresponding to removal efficiencies of 80.86%, 86.74%, and 90.33%, respectively. The cleaning efficiency was strongly governed by the sludge composition and oxidation state: higher O/C ratios and enrichment of polar heavy fractions enhanced oil–solid adhesion and hindered oil detachment, whereas higher saturate contents and lower oxidation degrees facilitated rapid oil separation. Overall, the findings demonstrate that the treatability of oily sludge is controlled by its intrinsic physicochemical properties. The proposed high-speed stirring technique provides a promising, energy-efficient, and environmentally sustainable approach for oily sludge remediation and resource recovery, offering valuable insights for optimizing treatment parameters and scaling up green petroleum waste management technologies.
Open AccessRegional Variations in Physicochemical Properties and Oil–Solid Interaction Mechanisms of Oily Sludge from Three Chinese Oilfields
Oily sludge is one of the most challenging solid wastes generated during petroleum production and wastewater treatment, posing long-term environmental risks and demanding effective resource-recovery strategies. This study systematically investigated the physicochemical characteristics, compositional differences, and oil–solid interaction mechanisms of oily sludge (OS) from three representative Chinese oilfields, Panjin, Daqing and Xinjiang, through integrated analyses of elemental composition, oil composition, X-ray diffractometer (XRD), Fourier-transform infrared (FT-IR), Gas chromatograph (GC), and Confocal laser scanning microscope (CLSM). The results revealed pronounced regional variations in oxidation degree, hydrocarbon composition, and mineralogy that critically influenced oil occurrence and removal behavior. The Panjin OS sample (PJ-OS) exhibited a high oxidation degree, enriched resins and asphaltenes, and compact film-like oil–solid structures, resulting in the lowest oil mobility and recovery potential. The Daqing OS (DQ-OS) was dominated by light saturates and showed the weakest oil–solid bonding, while the Xinjiang OS (XJ-OS) displayed moderate oxidation and intermediate properties. A novel room-temperature high-speed stirring cleaning method was applied to evaluate oil removal performance under ambient conditions. The residual oil contents after treatment were 4.43% (PJ-OS), 1.65% (DQ-OS), and 1.22% (XJ-OS), corresponding to removal efficiencies of 80.86%, 86.74%, and 90.33%, respectively. The cleaning efficiency was strongly governed by the sludge composition and oxidation state: higher O/C ratios and enrichment of polar heavy fractions enhanced oil–solid adhesion and hindered oil detachment, whereas higher saturate contents and lower oxidation degrees facilitated rapid oil separation. Overall, the findings demonstrate that the treatability of oily sludge is controlled by its intrinsic physicochemical properties. The proposed high-speed stirring technique provides a promising, energy-efficient, and environmentally sustainable approach for oily sludge remediation and resource recovery, offering valuable insights for optimizing treatment parameters and scaling up green petroleum waste management technologies.
- Open Access
Variations in Oil Occurrence State and Properties during High-Speed Stirring Treatment of Oily Sludge
Oily sludge (OS) has long been regarded as a hazardous waste, and improper disposal may lead to serious environmental concerns and human health risks. Despite various methods having been proposed and applied to the treatment of OS, the oil occurrence states and properties in sludge are rarely characterized, which may directly link to the selection and effectiveness of treatment methods. Here, confocal laser scanning microscopy (CLSM), X-ray diffraction (XRD), gas chromatography (GC), and four components (SARA) analysis were utilized to characterize the changes in the oil occurrence states and compositions in OS samples before and after high-speed stirring (HSS) treatment. Our results show a substantial reduction in the oil concentration of OS after HSS treatment (from 32.98% to 1.65%), while SARA analysis reveals a similar oil composition before and after treatment, suggesting the broad applicability of HSS in removing oil and its insignificant selectivity towards various hydrocarbon components. This is further supported by the total petroleum hydrocarbon (TPH) analysis results, which show that the separated oil phase has a hydrocarbon composition similar to that of the original OS sample. The CLSM and fluorescence analysis suggest a homogeneous distribution of oil in the sludge, with relatively light components more concentrated in the pore systems between coarse mineral particles, whereas relatively heavy components tend to coexist with clay minerals. After HSS cleaning, both light and heavy components are removed to varying degrees, but light components are preferentially removed while heavy components tend to be retained in the sludge due to adsorption by clay minerals. This is consistent with TPH analysis, where a significant decrease in n-alkanes with lower carbon numbers (n-C14 to n-C20) was observed in the residual sample. Our findings demonstrate the dynamic response of oil occurrence states and compositions to the OS treatment process and highlight the importance of characterizing these fundamental properties prior to the selection of OS treatment methods.
Open AccessVariations in Oil Occurrence State and Properties during High-Speed Stirring Treatment of Oily Sludge
Oily sludge (OS) has long been regarded as a hazardous waste, and improper disposal may lead to serious environmental concerns and human health risks. Despite various methods having been proposed and applied to the treatment of OS, the oil occurrence states and properties in sludge are rarely characterized, which may directly link to the selection and effectiveness of treatment methods. Here, confocal laser scanning microscopy (CLSM), X-ray diffraction (XRD), gas chromatography (GC), and four components (SARA) analysis were utilized to characterize the changes in the oil occurrence states and compositions in OS samples before and after high-speed stirring (HSS) treatment. Our results show a substantial reduction in the oil concentration of OS after HSS treatment (from 32.98% to 1.65%), while SARA analysis reveals a similar oil composition before and after treatment, suggesting the broad applicability of HSS in removing oil and its insignificant selectivity towards various hydrocarbon components. This is further supported by the total petroleum hydrocarbon (TPH) analysis results, which show that the separated oil phase has a hydrocarbon composition similar to that of the original OS sample. The CLSM and fluorescence analysis suggest a homogeneous distribution of oil in the sludge, with relatively light components more concentrated in the pore systems between coarse mineral particles, whereas relatively heavy components tend to coexist with clay minerals. After HSS cleaning, both light and heavy components are removed to varying degrees, but light components are preferentially removed while heavy components tend to be retained in the sludge due to adsorption by clay minerals. This is consistent with TPH analysis, where a significant decrease in n-alkanes with lower carbon numbers (n-C14 to n-C20) was observed in the residual sample. Our findings demonstrate the dynamic response of oil occurrence states and compositions to the OS treatment process and highlight the importance of characterizing these fundamental properties prior to the selection of OS treatment methods.