DADonald C. Adams

Donald C. Adams

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Donald C. Adams has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Findings on subtask 1.6 – basin electric carbon storage research project: novel monitoring techniques

    by John E. Hunt, Grand Forks Univ. Of North Dakota, Donald C. Adams, Trevor L. Richards, Justin T. Kovacevich, Amanda J. Livers-Douglas, Nick A. Azzolina, Kyle A. McBride, Sofiane Djezzar, Kris MacLennan

    The Energy & Environmental Research Center (EERC) led a study to validate novel and emerging technologies as commercial monitoring techniques for application in carbon dioxide (CO2) injection operations. This applied research was conducted at Basin Electric Power Cooperative’s (Basin Electric’s) active CO2-injection operations in Beulah, North Dakota, in two phases. The EERC previously completed a set of baseline (preinjection) activities in Phase 1, which included 1) design of an automated, integrated, modular (AIM) monitoring station; 2) time-lapse electromagnetic (EM) field surveys; 3) drone-based surveillance studies; 4) time-lapse monitoring with seismic methods; and 5) advanced wellbore-monitoring methods. This report focuses on key accomplishments and major findings for the Phase 2 follow-on operational monitoring activities, including 6) deployment of an AIM monitoring network, 7) EM monitoring of CO2 with real-time data processing, 8) continued seasonal drone-based surveillance studies, 9) passive and active seismic surveys, and 10) wellbore monitoring with nuclear magnetic resonance (NMR) for near-surface characterization. All CO2-injection operations, including enhanced oil recovery, acid gas, or dedicated storage, must be permitted under the Underground Injection Control (UIC) program and are subject to monitoring requirements to ensure containment and that underground sources of drinking water are protected. Current state-of-the-art monitoring techniques often require many labor-intensive hours dedicated to the acquisition of data and typically rely on commercial facilities to process raw data from the field. The next generation of monitoring techniques should be cost-effective, have a lower impact, generate more continuous and autonomous data streams, and perform faster in terms of time to acquire and/or process the data. Monitoring data collected during Phase 2 have demonstrated the commercial readiness of multiple novel monitoring techniques that comply with the most rigorous UIC requirements for application across all kinds of CO2-injection projects, and learnings facilitated by this research have directly benefited other CO2-injection projects. Major accomplishments in Phase 2 include the following: • Three AIM stations were deployed, demonstrating a low-impact method for acquiring monitoring data efficiently. In addition, an automated soil gas-sampling system and real-time dashboard for processing and visualizing soil gas results and attributing source through a decision-based framework were successfully tested at significant cost savings relative to traditional manual soil gas-sampling methods. • A 3D tTEM survey and a traditional 2D ERT survey to characterize near-surface conditions were collected for comparison. tTEM resulted in much lower impact and faster acquisition and yielded high-quality results in three dimensions at significant cost savings. The interpretation of resistivity structure in the shallow subsurface was supported with well-based NMR and lithology logs. • A time-lapse CSEM survey was acquired using metal-cased groundwater wells to transmit current deep into the earth and image CO2 injection into the reservoir. A spCSEM response was observed and evaluated in time-lapse, which uniquely captured the interplay of the reservoir’s connectivity and response to pressure and flow. This was the first time this method used multiple stages of toggling CO2 injection between two wells to understand well interaction. • Three drone missions were repeated with photogrammetry, lidar, thermal, and multispectral to support geophysical survey work and characterize seasonal changes of vegetation to monitor surface conditions. In addition, a novel workflow using multispectral imagery was developed for optimizing survey acquisitions to ensure repeatability between surveys by accounting for seasonal effects. • A passive seismic survey was repeated and imaged the reservoir and Precambrian basement. • Two repeat active seismic surveys with low-energy, low-impact sourcing with AWD were acquired and showed a time-lapse response for imaging the injected CO2 in the reservoir at significant cost savings relative to traditional seismic acquisition methods. Additionally, compressive sensing decimation and reconstruction was successfully implemented to image the CO2 injection. The EERC has successfully completed all activities and achieved all milestones within the performance period of Subtask 1.6. Of the techniques tested, the AIM concept, spCSEM, tTEM, and AWD are noted for their novelty, acquisition efficiency, cost-effectiveness, low impact, and compliance with UIC requirements. This subtask was funded through the EERC–U.S. Department of Energy Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. The EERC also recognizes its project partners—Basin Electric Power Cooperative, Dakota Gasification Company, Carbon Vault Holdings LLC, and Coteau Properties Company—for their significant contributions to the project, including but not limited to providing access to the site, sharing commercial data for comparison to research results, and supporting fieldwork with their staff.

  • Active Seismoelectric Monitoring of CO2 Injection

    by Kris MacLennan, Trevor Richards, Kyle McBride, César Barajas-Olalde, Donald Adams

  • Open Access

    2D Seismic Surveys as an Alternative for CO2 Monitoring in the North Dakota CarbonSAFE Project

    by USDOE Office of Fossil Energy and Carbon Management (FECM), César Barajas-Olalde, Donald C. Adams, Hansel Gonzalez, Mengmeng Zhang, Pablo Benitez, Ryan J. Klapperich, Wesley D. Peck, Panos Doulgeris

    Conference presentation for International Meeting for Applied Geoscience & Energy (IMAGE), Houston, TX, August 28 – September 1, 2023. As part of the North Dakota CarbonSAFE project, seismic, controlled-source electromagnetic, and microgravity baseline monitoring surveys were collected to assess the safe, permanent, commercial-scale geologic storage of CO2 generated by the Milton R. Young coal-fired power plant. Data from five 2D seismic lines were assessed as an alternative to 3D seismic for CO2 monitoring. 2D and 3D surveys were compared using wave equation-based (WEB)-AVO inversion. The encouraging WEB-AVO results demonstrated that 2D surveys could be included in CO2 monitoring programs as a cost-effective method.

  • Open Access

    On the Feasibility of Geophysical Methods for CO2 Monitoring in the North Dakota CarbonSAFE Project

    by USDOE Office of Fossil Energy and Carbon Management (FECM), César Barajas-Olalde, Donald C. Adams, Kurt M. Strack, Sonya Davydycheva, Yardenia Martínez, Kris MacLennan, Ryan J. Klapperich, Wesley D. Peck, Shannon Mikula

    Conference presentation at American Institute of Chemical Engineers (AIChE) Annual Meeting, Phoenix, AZ, November 13–18, 2022. An analysis of rock physics crossplots and diagnostic models suggests that the baseline seismic data may be sensitive to changes in lithology and porosity of the Broom Creek Formation and that these changes may be detectable by prestack seismic inversion.

  • Open Access

    Quality Analysis of Baseline Time-Lapse CSEM Data CarbonSAFE Project, North Dakota

    by USDOE Office of Fossil Energy and Carbon Management (FECM), César Barajas-Olalde, Kris MacLennan, Kurt M. Strack, Sonya Davydycheva, Tilman Hanstein, Yardenia Martinez, Donald C. Adams, Ryan J. Klapperich, Wesley D. Peck, et al.

    Conference presentation at International Meeting for Applied Geoscience & Energy (IMAGE), Houston, TX, August 28 – September 2, 2022. When a series of time-lapse CSEM surveys are designed to measure the often-small variations in signal seen in CCUS projects, the primary concern must be collecting the highest-quality data and reducing as much noise as possible. This includes optimization during planning and feasibility, careful and consistent quality checks in the field, and transparent and repeatable postprocessing steps. We apply this practice to a baseline (prior to CO2 injection) CSEM data set collected for a time-lapse survey in Center, North Dakota, as a part of the North Dakota CarbonSAFE project, and describe the rigorous quality control and assessment methods used, including noise removal and data validation with 1D and 3D inversion to tie results to borehole logs. The final result is an accurate and representative CSEM data set and information that stakeholders can use to inform future time-lapse survey costs and designs.

  • Open Access

    North Dakota CarbonSAFE Baseline Microgravity Survey, Lessons Learned

    by USDOE Office of Fossil Energy and Carbon Management (FECM), Donald C. Adams, César Barajas-Olalde, Kris MacLennan, Chioma Onwumelu, Ryan J. Klapperich, Wesley D. Peck, Shannon Mikula

    Conference presentation at American Geophysical Union (AGU) Fall Meeting, New Orleans, LA and virtual, December 13–17, 2021. The team conducted a baseline microgravity survey near Minnkota Power Cooperative’s Milton R. Young power station, south of Center, North Dakota, as a part of the North Dakota CarbonSAFE (Carbon Storage Assurance Facility Enterprise) geophysical activities. The goal of this survey was to assess whether microgravity would be an appropriate technique to monitor CO2 stored at this site.

  • Open Access

    Using Controlled-Source Electromagnetic (CSEM) for CO2 Storage Monitoring in the North Dakota CarbonSAFE Project

    by USDOE Office of Fossil Energy and Carbon Management (FECM), César Barajas-Olalde, Sofia Davydycheva, Tilman Hanstein, Daniel A. Laudal, Yardenia Martínez, Kris MacLennan, Shannon Mikula, Donald C. Adams, Ryan J. Klapperich, et al.

    Conference presentation for International Meeting for Applied Geophysics & Energy (IMAGE), September 26 – October 1, 2021, Denver, CO. Geophysical methods are key for characterizing the geologic formations to store CO2 and monitor the injected CO2 over time to ensure containment. In the integrated multimeasurement geophysical approach considered for this project, it is expected that the controlled-source electromagnetic (CSEM) method is a strong contributor to mapping the CO2 movement. A feasibility study of the CSEM method, including 1D and 3D modeling and a field noise test, was conducted to determine its effectiveness in monitoring CO2 in the Broom Creek and Deadwood Formations. The study results demonstrate that the CSEM method can be used for CO2 storage monitoring in the study area.

  • CO2 Injection Monitoring with a Scalable, Automated Sparse Seismic Array

    by César Barajas-Olalde, Donald Adams, Lu Jin, John Hamling, Nicholas Bosshart, Wesley Peck

  • Integrated simulation to seismic and seismic reservoir characterization in a CO2 EOR monitoring application

    by Alan Mur, César Barajas-Olalde, Donald C. Adams, Lu Jin, Jun He, John A. Hamling, Charles D. Gorecki

    Understanding the behavior of CO2 injected into a reservoir and delineating its spatial distribution are fundamentally important in enhanced oil recovery (EOR) and CO2 capture and sequestration activities. Interdisciplinary geoscience collaboration and well-defined workflows, from data acquisition to reservoir simulation, are needed to effectively handle the challenges of EOR fields and envisioned future commercial-scale sites for planned and incidental geologic CO2 storage. Success of operations depends on decisions that are based on good understanding of geologic formation heterogeneities and fluid and pressure movements in the reservoir over large areas over time. We present a series of workflow steps that optimize the use of available data to improve and integrate the interpretation of facies, injection, and production effects in an EOR application. First, we construct a simulation-to-seismic model supported by rock physics to model the seismic signal and signal quality needed for 4D monitoring of fluid and pressure changes. Then we use Bayesian techniques to invert the baseline and monitor seismic data sets for facies and impedances. To achieve a balance between prior understanding of the reservoir and the recorded time-lapse seismic data, we invert the seismic data sets by using multiple approaches. We first invert the seismic data sets independently, exploring sensible parameter scenarios. With the resulting realizations, we develop a shared prior model to link the reservoir facies geometry between seismic vintages upon inversion. Then we utilize multirealization analysis methods to quantify the uncertainties of our predictions. Next, we show how data may be more deeply interrogated by using the facies inversion method to invert prestack seismic differences directly for production effects. Finally, we show and discuss the feedback loop for updating the static and dynamic reservoir simulation model to highlight the integration of geophysical and engineering data within a single model.