Zhunussov Anuarbek Makhsutzhanovich
Research Subjects
Zhunussov Anuarbek Makhsutzhanovich has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Gulnara Letayevna Katkeeva
Chemical-Metallurgical Institute Named After Zh. Abishev, 100009 Karaganda, Kazakhstan
2 shared publications - Yerlan Zhunussov
Green Chemicals Kazakhstan, Karaganda 100030, Kazakhstan
2 shared publications - Zhamila Shaike
Zh. Abishev Chemical-Metallurgical Institute, Karaganda 100030, Kazakhstan
2 shared publications - Aidarkhan Mukhtar
Chemical-Metallurgical Institute Named After Zh. Abishev, 100009 Karaganda, Kazakhstan
1 shared publication - Akubaeva Makijan Aubakirovna
Z. Abishev Chemical and Metallurgical Institute, Karaganda, Kazakhstan
1 shared publication - Gizatullina Dilara Rafailovna
Chemical-Metallurgical Institute Named After Zh. Abishev, Karaganda 100030, Kazakhstan
1 shared publication
Latest Publications
- Open Access
Electrochemical Pretreatment of Chrysocolla for Enhanced Sulfidization and Flotation: Mechanism and Process Optimization
The flotation of oxidized copper minerals is limited by poor surface reactivity and the insufficient effectiveness of conventional sulfidization. This study investigated 50 Hz alternating current electrochemical pretreatment to enhance the sulfidization and flotation of chrysocolla and a natural oxidized copper ore. Operating parameters, including current density, treatment time, pulp pH, and sodium sulfide dosage, were optimized using a design of experiments approach. Phase transformations were characterized by scanning electron microscopy with energy-dispersive X-ray spectroscopy and X-ray diffraction. Pretreatment with 50 Hz alternating current promoted the surface formation of tenorite (CuO), which was subsequently transformed into covellite (CuS) during sulfidization, providing favorable conditions for subsequent flotation. The optimum conditions for chrysocolla were a current density of 100 A m−2, a pretreatment time of 0.5 min, pH 8, a sodium sulfide dosage of 25% of the stoichiometric requirement, and a sulfidization time of 2.5 min. Validation tests on natural oxidized copper ore showed that alternating current pretreatment increased copper recovery from 29.16% to 79.63% and concentrate grade from 12.84 to 25.50 wt.% compared with conventional sulfidization. These findings demonstrate that alternating current electrochemical pretreatment effectively modifies oxidized copper mineral surfaces and enhances their subsequent sulfidization and flotation, providing a promising approach for the beneficiation of refractory oxidized copper ores.
Open AccessElectrochemical Pretreatment of Chrysocolla for Enhanced Sulfidization and Flotation: Mechanism and Process Optimization
The flotation of oxidized copper minerals is limited by poor surface reactivity and the insufficient effectiveness of conventional sulfidization. This study investigated 50 Hz alternating current electrochemical pretreatment to enhance the sulfidization and flotation of chrysocolla and a natural oxidized copper ore. Operating parameters, including current density, treatment time, pulp pH, and sodium sulfide dosage, were optimized using a design of experiments approach. Phase transformations were characterized by scanning electron microscopy with energy-dispersive X-ray spectroscopy and X-ray diffraction. Pretreatment with 50 Hz alternating current promoted the surface formation of tenorite (CuO), which was subsequently transformed into covellite (CuS) during sulfidization, providing favorable conditions for subsequent flotation. The optimum conditions for chrysocolla were a current density of 100 A m−2, a pretreatment time of 0.5 min, pH 8, a sodium sulfide dosage of 25% of the stoichiometric requirement, and a sulfidization time of 2.5 min. Validation tests on natural oxidized copper ore showed that alternating current pretreatment increased copper recovery from 29.16% to 79.63% and concentrate grade from 12.84 to 25.50 wt.% compared with conventional sulfidization. These findings demonstrate that alternating current electrochemical pretreatment effectively modifies oxidized copper mineral surfaces and enhances their subsequent sulfidization and flotation, providing a promising approach for the beneficiation of refractory oxidized copper ores.
- 27 October 2025
- Published by Springer Nature in Metallurgist
- Vol. 69 (7) , 1124-1132
Application of a multi-Functional reagent in the flotation process enrichment of oxidized copper ores
- 27 October 2025
- Published by Springer Nature in Metallurgist
- Vol. 69 (7) , 1124-1132
Application of a multi-Functional reagent in the flotation process enrichment of oxidized copper ores