Marius Cocard
Research Subjects
Marius Cocard has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Alin Constantin Murariu
ISIM Timisoara
2 shared publications - Ion Aurel Perianu
ISIM Timisoara
2 shared publications - Constantin Alin Antal
C Delgaz-Grid S.A.
1 shared publication - Eneia Frici
COMELF S.A.
1 shared publication - Iuliana Duma
ISIM Timisoara
1 shared publication - Vlad Ștefan Constantin
ISIM Timisoara
1 shared publication
Latest Publications
- 5 November 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 379, 41-52
Optimising the HVOF Deposition Technology of Al2O3-40%TiO2 Coatings for Energy Industry Applications
The paper presents a systematic approach to optimize the HVOF deposition technology of Al 2 O 3 40 TiO 2 coatings for the protection of components in the energy industry. Key performance factors evaluated include scratch resistance, surface roughness, and friction coefficient, given their importance for the intended applications. By means of a comprehensive experimental program using the Design of Experiment (DOE) method, the main HVOF process parameters were investigated, such as Fuel-to-Oxygen ratio (F/O), Stand-off Distance (SOD), and Powder Feed Rate (PFR), to identify optimal deposition conditions. Scratch resistance tests revealed that increasing the F/O and reducing the SOD significantly improved the tribological properties of the coatings. Surface morphology analysis through optical and electron microscopy confirmed that optimized HVOF parameters lead to dense coatings with low roughness and minimal defects, essential characteristics for components subjected to wear and severe friction. Additionally, tribological measurements demonstrated a significant reduction in the coefficient of friction for the optimized coatings. The obtained results demonstrate the HVOF technology’s capability to produce Al 2 O 3 40 TiO 2 coatings with superior properties for protecting energy industry components operating under severe conditions. The presented optimization approach can serve as a guide for best practices in developing new coating systems with enhanced performance.
- 5 November 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 379, 41-52
Optimising the HVOF Deposition Technology of Al2O3-40%TiO2 Coatings for Energy Industry Applications
The paper presents a systematic approach to optimize the HVOF deposition technology of Al 2 O 3 40 TiO 2 coatings for the protection of components in the energy industry. Key performance factors evaluated include scratch resistance, surface roughness, and friction coefficient, given their importance for the intended applications. By means of a comprehensive experimental program using the Design of Experiment (DOE) method, the main HVOF process parameters were investigated, such as Fuel-to-Oxygen ratio (F/O), Stand-off Distance (SOD), and Powder Feed Rate (PFR), to identify optimal deposition conditions. Scratch resistance tests revealed that increasing the F/O and reducing the SOD significantly improved the tribological properties of the coatings. Surface morphology analysis through optical and electron microscopy confirmed that optimized HVOF parameters lead to dense coatings with low roughness and minimal defects, essential characteristics for components subjected to wear and severe friction. Additionally, tribological measurements demonstrated a significant reduction in the coefficient of friction for the optimized coatings. The obtained results demonstrate the HVOF technology’s capability to produce Al 2 O 3 40 TiO 2 coatings with superior properties for protecting energy industry components operating under severe conditions. The presented optimization approach can serve as a guide for best practices in developing new coating systems with enhanced performance.
- 29 October 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 378, 77-90
Optimization of Hardness and Adhesion of Al2O3-40%TiO2 Coating Obtained by HVOF Spraying through Process Parameter Control
The paper presents an optimization approach for enhancing the hardness and adhesion of Al 2 O 3 -40%TiO 2 coatings produced by High-Velocity Oxi-Fuel (HVOF) thermal spraying, aimed at their application in protecting components subjected to aggressive environments and severe mechanical stresses [1-4]. Through an experimental factorial program, key parameters of the HVOF process such as fuel flow rate, oxygen flow rate, spray distance, and powder feed rate were investigated to identify optimal conditions leading to improved mechanical performance of the deposited layers. Vickers hardness and tensile adhesion tests were utilized to evaluate the properties of the coatings. The results indicated that increasing the fuel and oxygen flow rates, coupled with reducing the spray distance, significantly increased the hardness of the coatings, achieving values up to 244 HV5. Moreover, optimizing these parameters maximized the coating-substrate adhesion, reaching values exceeding 30 MPa. Microstructural analysis using scanning electron microscopy (SEM) revealed that optimized HVOF parameters generated dense layers with low porosity and enhanced adhesion at the layer-substrate interface, thereby explaining the superior mechanical behaviors of the coatings. These findings demonstrate the capability of HVOF technology to produce Al 2 O 3 -40%TiO 2 layers with optimal mechanical properties, essential for applications requiring resistance to wear, impact, and corrosive environments [5-7].
- 29 October 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 378, 77-90
Optimization of Hardness and Adhesion of Al2O3-40%TiO2 Coating Obtained by HVOF Spraying through Process Parameter Control
The paper presents an optimization approach for enhancing the hardness and adhesion of Al 2 O 3 -40%TiO 2 coatings produced by High-Velocity Oxi-Fuel (HVOF) thermal spraying, aimed at their application in protecting components subjected to aggressive environments and severe mechanical stresses [1-4]. Through an experimental factorial program, key parameters of the HVOF process such as fuel flow rate, oxygen flow rate, spray distance, and powder feed rate were investigated to identify optimal conditions leading to improved mechanical performance of the deposited layers. Vickers hardness and tensile adhesion tests were utilized to evaluate the properties of the coatings. The results indicated that increasing the fuel and oxygen flow rates, coupled with reducing the spray distance, significantly increased the hardness of the coatings, achieving values up to 244 HV5. Moreover, optimizing these parameters maximized the coating-substrate adhesion, reaching values exceeding 30 MPa. Microstructural analysis using scanning electron microscopy (SEM) revealed that optimized HVOF parameters generated dense layers with low porosity and enhanced adhesion at the layer-substrate interface, thereby explaining the superior mechanical behaviors of the coatings. These findings demonstrate the capability of HVOF technology to produce Al 2 O 3 -40%TiO 2 layers with optimal mechanical properties, essential for applications requiring resistance to wear, impact, and corrosive environments [5-7].