ACAn Chen

An Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


An Chen has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Calculation Method of Foundation Bearing Capacity of Waste Dumps Based on Boussinesq Equation

    by Jian Meng, Jiawen Liu, Jun Fu, Kexin Yin, Han Zhou, An Chen

    The insufficient bearing capacity of the foundation at waste dumps can easily lead to landslides and other geohazards. At present, discrepancies between the calculated bearing capacity of such foundations and actual field performance are a major cause of these accidents. Therefore, further research into methods for accurately estimating the foundation bearing capacity of waste dumps to guide engineering practice is crucial for preventing such incidents. This study employs a combination of theoretical and case analysis to examine the current calculation methods. We discover that the calculated values are smaller than the actual values. Moreover, by taking into account both the upper load of the waste dumps and the bearing capacity of the lower foundation, we analyzed the main problems leading to the underestimation. In response to the aforementioned issues, this study suggests incorporating the Boussinesq equation into the calculation of the upper load to account for the load distribution across various slope forms and the diffusion and superposition of stress at different foundation positions and depths. Simultaneously, the foundation’s bearing capacity is calculated to increase with burial depth, aligning with the stress at different positions. Finally, a new method for calculating the bearing capacity of foundations at waste dumps was developed. The bearing capacities of the waste dump foundation and the weakest point determined using the proposed method are validated through a case study and FLAC3D numerical simulation. This study can provide a reference for calculating the bearing capacity of foundations in similar waste dumps.

  • Open Access

    Study on the Bearing Capacity of Extra-Large-Diameter Piles in Complex and Thick Lacustrine Deposits

    by Huan Liu, An Chen, Kewen Liu

    To reveal the influence mechanism of complex and thick lacustrine sedimentary strata on the bearing performance of large-diameter and ultra-long piles, experimental and numerical simulation studies were carried out in view of the special engineering properties of peat soil in the strata. Three test piles with a diameter of 1 m and lengths of 98 m, 93 m, and 92 m, respectively, were taken as the research objects. The bearing characteristic parameters were obtained through static load tests, and the influence laws of parameters such as the thickness of the weak layer, pile length and pile diameter in the peat soil layer were analyzed in combination with numerical simulation. The results show that in the geological conditions of thick lacustrine sedimentary strata, the Q-s curve of the ultra-long pile is steeply descending, and the ultimate bearing capacity is 28,800 kN, showing the characteristics of end-bearing friction piles. The side friction resistance of the pile shows a typical “triangle” distribution in the upper part and reaches the ultimate value in the middle and lower parts, presenting a multi-hump “R” shape distribution. When the thickness of the weak layer increases from 10 m to 30 m, the settlement increases sharply, and when it reaches 40 m, the settlement almost remains unchanged. The change of pile length has a relatively small impact on the bearing capacity and can be ignored in terms of settlement change. When the pile diameter increases from 0.5 m to 1.0 m, the settlement decreases sharply, and when the pile diameter exceeds 1.5 m, the settlement fluctuates very little. The research confirms that the change of pile diameter has the greatest impact on the ultra-long pile, followed by the thickness of the weak layer, and the pile length has the least impact. The research results can provide theoretical basis and technical support for the design and construction of large-diameter and ultra-long piles in similar complex lacustrine sedimentary strata.