BCBharat Surya Chamarthi

Bharat Surya Chamarthi

*This is an algorithmically generated author record based on publicly available information.

Bharat Surya Chamarthi has a total of 2 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Two-Dimensional Local Thermal Equilibrium Model for Capturing Thermocline Dynamics in Packed Bed Cryogenic Energy Recovery Systems

    by Rajendra Kumar, Pavitra Sandilya, Bharat Surya Chamarthi

    The performance of a packed-bed cryogenic energy recovery system (PB-CERS) has been studied for storing and reusing the waste cold generated during the regasification of various liquid cryogens. Various numerical approaches, such as local thermal equilibrium (LTE) and local thermal non-equilibrium (LTNE), are used to study PB-CERS. We adopted an LTE approach for our study. We validated our model at both cryogenic and non-cryogenic conditions. This study demonstrated, for the first time, the applicability of a 2D-LTE model to predicting the performance of a PB-CERS during the charging-standby-discharging operation. Using the validated model, we performed parametric analyses of charging and discharging operations at Peclet numbers of 32540 to 65080, respectively, across packed-bed aspect ratios ranging from 2.29 to 4.57. The results reveal that during the charging operation, higher Peclet numbers and longer beds are desirable; however, the pressure drop penalty also increases at higher flow rates and for longer packed beds. Further, the temperature contours of the PB-CERS show that the thermocline in the near-wall region propagates faster than that at the centre of the packed bed. Moreover, when diffusion starts to dominate as the Peclet number decreases, the packed bed is under-utilised and significant losses occur. Furthermore, the developed 2D-LTE model can predict the state of charge of the PB-CERS. Hence, the LTE modelling approach should be sufficient for the PB-CERS (quartz-air system) between 115 K and 300 K at sub-ambient pressures to predict thermocline behaviour. Thus, the proposed model can be used to design PB-CERS for sensible heat storage and can be further explored with phase-change materials.

  • Open Access

    Numerical Evaluation of Packed Bed Cryogenic Energy Recovery System Using a Two-Dimensional Local Thermal Equilibrium Model

    by Rajendra Kumar, Bharat Surya Chamarthi, Pavitra Sandilya

    A packed-bed cryogenic energy recovery system (PB-CERS) is used to recover the waste cold generated during the regasification of various cryogens and store it for later use for different refrigeration/cold applications. Such systems have been studied extensively using various numerical approaches, like local thermal equilibrium (LTE) and local thermal non-equilibrium (LTNE). For the first time, this work attempts to assess the applicability of a 2D-LTE model for predicting the performance of a PB-CERS operating cyclically in charging-standby-discharging mode. The model was validated at both cryogenic and non-cryogenic conditions. Using the validated model, we performed parametric analyses of charging and discharging operations at Peclet numbers ranging from 32540 to 78097 and from 32540 to 65080, respectively, across packed-bed aspect ratios of 2.29, 3.50, and 4.57. Further, we performed thermodynamic analysis of the energy recovery efficiency of the PB-CERS. Our study showed that the cooling rate of the PB-CERS increased, while the charging efficiency decreased from 86% to 74% as the Peclet number increased from 32540 to 65080. During the discharging operation, the duration of cold energy recovery from PB-CERS and discharge efficiency increase with increasing Peclet number. It was found that increasing the aspect ratio increased both charging and discharging efficiencies. It was also observed that a longer standby period deteriorates the discharge efficiency of the PB-CERS. In our study, the amount of cold recovered at the end of discharge decreased by 8% when a 2-hour standby period was considered. Thus, the proposed model can be used to design PB-CERS for sensible heat storage and can be further explored with phase-change materials.