Suud Ademnur Hasen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Suud Ademnur Hasen has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Saffet Ayasun
Department of Electrical and Electronics Engineering, Gazi University, Ankara, Turkey
3 shared publications - Ali Merwan Shakor
Department of Electrical Engineering , College of Engineering , University of Kirkuk , Kirkuk , Iraq , uokirkuk.edu.iq
1 shared publication Azhar Jabbar Abdulridha
Graduate School of Natural and Applied Sciences Department of Electrical and Electronics Engineering Gazi University Ankara Türkiye
1 shared publication- Cyrus Wekesa
School of Engineering, University of Eldoret, Eldoret, Kenya.
1 shared publication Fsaha Mebrahtu Gebru
1 shared publication- Omer Aydin
Department of Electrical and Electronics Engineering Ankara University Ankara Türkiye
1 shared publication
Latest Publications
- Open Access
- 10 July 2026
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 31
Metaheuristic-based optimal sizing of standalone PV-wind-BESS-EV hybrid renewable energy system
- 10 July 2026
- Published by Elsevier in Energy Conversion and Management: X
- Vol. 31
Open AccessMetaheuristic-based optimal sizing of standalone PV-wind-BESS-EV hybrid renewable energy system
- 15 January 2026
- Published by Wiley in Asian Journal of Control
Computation of stability delay margin for a two‐area load frequency control system enhanced with virtual inertia and damping control
This article explores the effects of communication delays on the delay‐dependent stability analysis of load frequency control (LFC) systems containing virtual inertia and damping (VID) control. Since LFC systems rely on communication networks, they are prone to delays that could impair the system's dynamic performance and lead to undesired frequency variations. Furthermore, the widespread adoption of renewable energy sources (RESs) could worsen these frequency fluctuations because of their low inertia. The VID control offers a remedy for stability issues by mimicking the necessary damping and inertia response. Delay‐dependent stability analysis aims to identify the largest allowable delays for stability, defined as the stability delay margin (SDM). This study proposes an efficient method to compute critical eigenvalues and corresponding SDMs. The technique swiftly identifies critical eigenvalues along the imaginary axis and calculates SDMs by monitoring eigenvalue loci of a transformation matrix. Stability regions, delineating SDMs in delay space, are determined. The validity of these regions and their boundaries is rigorously verified using the quasi‐polynomial mapping‐based root finder (QPmR) algorithm and time‐domain simulations. The findings demonstrate that the suggested technique computes SDMs correctly, and integration of VID control in LFC systems increases SDM values, improving frequency stability. Additionally, when delays are commensurate, SDMs computed using the proposed method closely match those from the direct method. The proposed method offers a comparative advantage by handling both commensurate and incommensurate delays with less computational burden, unlike the direct method, which only works for commensurate delays.
- 15 January 2026
- Published by Wiley in Asian Journal of Control
Computation of stability delay margin for a two‐area load frequency control system enhanced with virtual inertia and damping control
This article explores the effects of communication delays on the delay‐dependent stability analysis of load frequency control (LFC) systems containing virtual inertia and damping (VID) control. Since LFC systems rely on communication networks, they are prone to delays that could impair the system's dynamic performance and lead to undesired frequency variations. Furthermore, the widespread adoption of renewable energy sources (RESs) could worsen these frequency fluctuations because of their low inertia. The VID control offers a remedy for stability issues by mimicking the necessary damping and inertia response. Delay‐dependent stability analysis aims to identify the largest allowable delays for stability, defined as the stability delay margin (SDM). This study proposes an efficient method to compute critical eigenvalues and corresponding SDMs. The technique swiftly identifies critical eigenvalues along the imaginary axis and calculates SDMs by monitoring eigenvalue loci of a transformation matrix. Stability regions, delineating SDMs in delay space, are determined. The validity of these regions and their boundaries is rigorously verified using the quasi‐polynomial mapping‐based root finder (QPmR) algorithm and time‐domain simulations. The findings demonstrate that the suggested technique computes SDMs correctly, and integration of VID control in LFC systems increases SDM values, improving frequency stability. Additionally, when delays are commensurate, SDMs computed using the proposed method closely match those from the direct method. The proposed method offers a comparative advantage by handling both commensurate and incommensurate delays with less computational burden, unlike the direct method, which only works for commensurate delays.
- Open Access
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 20 (1)
Enhancement in Robust Stability Delay Margins for an Interval Shipboard Microgrid With Virtual Inertia and Damping Control
The study describes the mathematical calculation of the robust stability delay margin (SDM) of an interval shipboard microgrid (SMG) equipped with a virtual inertia‐damping (VID) control loop. The utilization of communication networks to coordinate and manage distributed energy sources inevitably introduce time delays, and these delays can compromise the SMG's frequency stability. This problem is compounded by the limited rotational inertia and low damping associated with renewable energy sources (RESs) and uncertainties in system parameters. Consequently, understanding how communication delays influence system stability under parametric uncertainty is essential. To enhance the SMG's frequency response, the study first integrates a VID control loop into the system. It then introduces a novel approach for computing the robust SDMs of the resulting SMG‐VID system. The proposed method combines Kharitonov's Theorem and the Rekasius substitution with Resultant Theory. Using this framework, robust SDMs are calculated for different controller gains and varying levels of uncertainty in the system parameters. These calculations are used to assess how VID control and parametric uncertainty affect the delay tolerance of the system. The findings show that incorporating the VID control loop substantially expands the robust SDM, thereby improving the system's ability to tolerate communication delays. However, the robust SDM decreases as the level of parametric uncertainty rises. Lastly, time‐domain simulations are conducted to substantiate the theoretically calculated SDMs. The findings are further corroborated via a quasi‐polynomial mapping‐based root‐finding (QPmR) algorithm.
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 20 (1)
Open AccessEnhancement in Robust Stability Delay Margins for an Interval Shipboard Microgrid With Virtual Inertia and Damping Control
The study describes the mathematical calculation of the robust stability delay margin (SDM) of an interval shipboard microgrid (SMG) equipped with a virtual inertia‐damping (VID) control loop. The utilization of communication networks to coordinate and manage distributed energy sources inevitably introduce time delays, and these delays can compromise the SMG's frequency stability. This problem is compounded by the limited rotational inertia and low damping associated with renewable energy sources (RESs) and uncertainties in system parameters. Consequently, understanding how communication delays influence system stability under parametric uncertainty is essential. To enhance the SMG's frequency response, the study first integrates a VID control loop into the system. It then introduces a novel approach for computing the robust SDMs of the resulting SMG‐VID system. The proposed method combines Kharitonov's Theorem and the Rekasius substitution with Resultant Theory. Using this framework, robust SDMs are calculated for different controller gains and varying levels of uncertainty in the system parameters. These calculations are used to assess how VID control and parametric uncertainty affect the delay tolerance of the system. The findings show that incorporating the VID control loop substantially expands the robust SDM, thereby improving the system's ability to tolerate communication delays. However, the robust SDM decreases as the level of parametric uncertainty rises. Lastly, time‐domain simulations are conducted to substantiate the theoretically calculated SDMs. The findings are further corroborated via a quasi‐polynomial mapping‐based root‐finding (QPmR) algorithm.
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1) , 3505433
Robust Stability Regions for Time‐Delayed Microgrid With Superconducting Magnetic Energy Storage System Using Kharitonov’s Theorem
Growing use of intermittent and low‐inertia renewable energy sources (RES) makes it very hard to control the frequency in current power systems. Additionally, there are unavoidable time delays when utilizing communication networks for coordination and control, and parametric uncertainties further exacerbate the stability concern. This work presents a detailed evaluation of the robust delay‐dependent stability (DDS) of a microgrid (MG) equipped with a superconducting magnetic energy storage (SMES) component. To determine the robust stability regions (RSRs) in the proportional–integral (PI) controller parameter space, a new frequency‐domain method combining Kharitonov’s theorem (KT) alongside stability boundary locus (SBL) procedure is proposed. The consequences of communication time delays (CTDs) and percentages of parametric uncertainty on the RSRs are also examined. The simulation results show that the RSRs become smaller as the time delay and parametric uncertainty increase. This reduction suggests that the robustness of the MG–SMES system deteriorates under these conditions. Nevertheless, the inclusion of SMES improves the overall stability and frequency response of the system. Finally, the theoretical outcomes are corroborated via the quasi‐polynomial mapping‐based root‐finder (QPmR) method and time‐domain simulations. The close agreement among the results confirms the accuracy and effectiveness of the proposed method.
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1) , 3505433
Open AccessRobust Stability Regions for Time‐Delayed Microgrid With Superconducting Magnetic Energy Storage System Using Kharitonov’s Theorem
Growing use of intermittent and low‐inertia renewable energy sources (RES) makes it very hard to control the frequency in current power systems. Additionally, there are unavoidable time delays when utilizing communication networks for coordination and control, and parametric uncertainties further exacerbate the stability concern. This work presents a detailed evaluation of the robust delay‐dependent stability (DDS) of a microgrid (MG) equipped with a superconducting magnetic energy storage (SMES) component. To determine the robust stability regions (RSRs) in the proportional–integral (PI) controller parameter space, a new frequency‐domain method combining Kharitonov’s theorem (KT) alongside stability boundary locus (SBL) procedure is proposed. The consequences of communication time delays (CTDs) and percentages of parametric uncertainty on the RSRs are also examined. The simulation results show that the RSRs become smaller as the time delay and parametric uncertainty increase. This reduction suggests that the robustness of the MG–SMES system deteriorates under these conditions. Nevertheless, the inclusion of SMES improves the overall stability and frequency response of the system. Finally, the theoretical outcomes are corroborated via the quasi‐polynomial mapping‐based root‐finder (QPmR) method and time‐domain simulations. The close agreement among the results confirms the accuracy and effectiveness of the proposed method.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 17, 250-255
Impact of Virtual Inertia on Stability Delay Margins of Micro grids with Communication Time Delay
High penetration of renewable energy sources (RESs) may contribute to power system oscillations due to diminished inertia, while communication networks generate time delays that can compromise system performance and induce frequency fluctuations. This paper uses Rekasius substitution to compute the stability delay margin of an islanded micro grid (MG) with virtual inertia (VI) and constant communication delay. For a finite positive time delay, the approach seeks to find all possible purely complex roots of the characteristic equation. The method starts by converting the transcendental terms in the characteristic polynomial into a regular polynomial. After that, the Routh-Hurwitz Stability Criterion is used to calculate the purely imaginary roots with the crossing frequency and stability delay margin. Time delay values at which the MG is marginally stable are estimated for a wide range of proportional-integral (PI) controller gains. Accuracy of results is verified using quasi-polynomial mapping-based root finder (QPmR) algorithm and time-domain simulations in Matlab/Simulink.
- 14 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 17, 250-255
Impact of Virtual Inertia on Stability Delay Margins of Micro grids with Communication Time Delay
High penetration of renewable energy sources (RESs) may contribute to power system oscillations due to diminished inertia, while communication networks generate time delays that can compromise system performance and induce frequency fluctuations. This paper uses Rekasius substitution to compute the stability delay margin of an islanded micro grid (MG) with virtual inertia (VI) and constant communication delay. For a finite positive time delay, the approach seeks to find all possible purely complex roots of the characteristic equation. The method starts by converting the transcendental terms in the characteristic polynomial into a regular polynomial. After that, the Routh-Hurwitz Stability Criterion is used to calculate the purely imaginary roots with the crossing frequency and stability delay margin. Time delay values at which the MG is marginally stable are estimated for a wide range of proportional-integral (PI) controller gains. Accuracy of results is verified using quasi-polynomial mapping-based root finder (QPmR) algorithm and time-domain simulations in Matlab/Simulink.