Nathany Lopes de Oliveira Sousa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nathany Lopes de Oliveira Sousa has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Gabriel Jácomo de Paula Tonon
Grupo de Estudos em Dispositivos de Armazenamento de Energia (GEDAE), Departamento de Química, Universidade Federal de Viçosa, Av. Peter Henry Rolfs, s/n Campus Universitário, Viçosa CEP 36570-900, MG, Brazil
2 shared publications - Garbas Anacleto dos Santos Junior
Grupo de Estudos em Dispositivos de Armazenamento de Energia (GEDAE), Departamento de Química, Universidade Federal de Viçosa, Vicosa 36570-900, MG, Brazil
2 shared publications - Glenda Ribeiro de Barros Silveira Lacerda
Departamento de Química/ICEx, Universidade Federal de Minas Gerais, Av. Antônio Carlos, 6627, Pampulha, Belo Horizonte CEP 31270-901, MG, Brazil
2 shared publications - Luiz Paulo Fagundes dos Santos
Grupo de Estudos em Dispositivos de Armazenamento de Energia (GEDAE), Departamento de Química, Universidade Federal de Viçosa, Av. Peter Henry Rolfs, s/n Campus Universitário, Viçosa CEP 36570-900, MG, Brazil
2 shared publications - Paulo Fernando Riberiro Ortega
Grupo de Estudos em Dispositivos de Armazenamento de Energia (GEDAE), Departamento de Química, Universidade Federal de Viçosa, Vicosa 36570-900, MG, Brazil
2 shared publications - Tulio Matencio
Departamento de Química/ICEx, Universidade Federal de Minas Gerais, Av. Antônio Carlos, 6627, Pampulha, Belo Horizonte CEP 31270-901, MG, Brazil
2 shared publications
Latest Publications
- Open Access
- 10 March 2026
- Published by MDPI AG in Nanoenergy Advances
- Vol. 6 (1) , 11
Synthesis and Application of P(EDOT-co-Py)@MWCNT Hybrid as Cathode Electrode for Aqueous Aluminum-Ion Batteries
A hybrid material based on the copolymerization of EDOT (3,4-ethylenedioxythiophene) and Py (pyrrole), 1:1 monomer ratio, onto multi-walled carbon nanotubes (MWCNTs) was synthesized through a multistep functionalization approach. The resulting P(EDOT-co-Py)@MWCNT hybrid, poly(3,4-ethylenedioxythiophene-co-pyrrol)@MWCNT hybrid, was characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These characterizations confirmed the successive functionalization steps, the effective anchoring of the monomers, and the subsequent formation of the copolymer. Transmission electron microscopy (TEM) images revealed a homogeneous polymer coating along the nanotube surface while preserving the structural integrity of the MWCNTs throughout the functionalization and polymerization processes. The P(EDOT-co-Py)@MWCNT hybrid was evaluated as an active electrode material for aluminum-ion storage in an aqueous aluminum sulfate electrolyte. The system exhibited two distinct charge-storage mechanisms: at high current densities, proton surface adsorption dominated, whereas at lower rates, a faradaic contribution associated with polymer chain redox activity and the reversible extraction/insertion of Al3+ became prevalent. The hybrid electrode delivered high specific capacities, reaching 200.6, 106.3, and 44.3 mAh g−1 at 0.10, 0.25, and 0.50 A g−1, respectively. These values are comparable to—or even exceed—those reported for similar cathodic materials designed for Al3+ storage, highlighting P(EDOT-co-Py)@MWCNT hybrid as a highly promising cathode candidate for aqueous aluminum-ion energy-storage systems.
- 10 March 2026
- Published by MDPI AG in Nanoenergy Advances
- Vol. 6 (1) , 11
Open AccessSynthesis and Application of P(EDOT-co-Py)@MWCNT Hybrid as Cathode Electrode for Aqueous Aluminum-Ion Batteries
A hybrid material based on the copolymerization of EDOT (3,4-ethylenedioxythiophene) and Py (pyrrole), 1:1 monomer ratio, onto multi-walled carbon nanotubes (MWCNTs) was synthesized through a multistep functionalization approach. The resulting P(EDOT-co-Py)@MWCNT hybrid, poly(3,4-ethylenedioxythiophene-co-pyrrol)@MWCNT hybrid, was characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These characterizations confirmed the successive functionalization steps, the effective anchoring of the monomers, and the subsequent formation of the copolymer. Transmission electron microscopy (TEM) images revealed a homogeneous polymer coating along the nanotube surface while preserving the structural integrity of the MWCNTs throughout the functionalization and polymerization processes. The P(EDOT-co-Py)@MWCNT hybrid was evaluated as an active electrode material for aluminum-ion storage in an aqueous aluminum sulfate electrolyte. The system exhibited two distinct charge-storage mechanisms: at high current densities, proton surface adsorption dominated, whereas at lower rates, a faradaic contribution associated with polymer chain redox activity and the reversible extraction/insertion of Al3+ became prevalent. The hybrid electrode delivered high specific capacities, reaching 200.6, 106.3, and 44.3 mAh g−1 at 0.10, 0.25, and 0.50 A g−1, respectively. These values are comparable to—or even exceed—those reported for similar cathodic materials designed for Al3+ storage, highlighting P(EDOT-co-Py)@MWCNT hybrid as a highly promising cathode candidate for aqueous aluminum-ion energy-storage systems.
- Open Access
- 22 December 2025
- Published by MDPI AG in Preprints.org
Synthesis and Application of P(EDOT-co-Py)@MWCNT Hybrid as Cathode Electrode for Aqueous Aluminum-Ion Batteries
A hybrid material based on the copolymerization of EDOT (3,4-ethylenedioxythiophene) and Py (pyrrole), 1:1 monomer ratio, onto multi-walled carbon nanotubes (MWCNTs) was synthesized through a multistep functionalization approach. The resulting P(EDOT-co-Py)@MWCNT hybrid, poly(3,4-ethylenedioxythiophene-co-pyrrol)@MWCNT hybrid, was characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These characterizations confirmed the successive functionalization steps, the effective anchoring of the monomers, and the subsequent formation of the copolymer. Transmission electron microscopy (TEM) images revealed a homogeneous polymer coating along the nanotube surface, while preserving the structural integrity of the MWCNTs throughout the functionalization and polymerization processes. The P(EDOT-co-Py)@MWCNT hybrid was evaluated as an active electrode material for aluminum-ion storage in aqueous aluminum sulfate electrolyte. The system exhibited two distinct charge-storage mechanisms: at high current densities, proton surface adsorption dominated, whereas at lower rates, a faradaic contribution associated with polymer chain redox activity and the reversible extraction/insertion of Al³⁺ became prevalent. The hybrid electrode delivered high specific capacities, reaching 200.6, 106.3, and 44.3 mAh g⁻¹ at 0.10, 0.25, and 0.50 A g⁻¹, respectively. These values are comparable to—or even exceed—those reported for similar cathodic materials designed for Al³⁺ storage, highlighting P(EDOT-co-Py)@MWCNT hybrid as a highly promising cathode candidate for aqueous aluminum-ion energy-storage systems.
- 22 December 2025
- Published by MDPI AG in Preprints.org
Open AccessSynthesis and Application of P(EDOT-co-Py)@MWCNT Hybrid as Cathode Electrode for Aqueous Aluminum-Ion Batteries
A hybrid material based on the copolymerization of EDOT (3,4-ethylenedioxythiophene) and Py (pyrrole), 1:1 monomer ratio, onto multi-walled carbon nanotubes (MWCNTs) was synthesized through a multistep functionalization approach. The resulting P(EDOT-co-Py)@MWCNT hybrid, poly(3,4-ethylenedioxythiophene-co-pyrrol)@MWCNT hybrid, was characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These characterizations confirmed the successive functionalization steps, the effective anchoring of the monomers, and the subsequent formation of the copolymer. Transmission electron microscopy (TEM) images revealed a homogeneous polymer coating along the nanotube surface, while preserving the structural integrity of the MWCNTs throughout the functionalization and polymerization processes. The P(EDOT-co-Py)@MWCNT hybrid was evaluated as an active electrode material for aluminum-ion storage in aqueous aluminum sulfate electrolyte. The system exhibited two distinct charge-storage mechanisms: at high current densities, proton surface adsorption dominated, whereas at lower rates, a faradaic contribution associated with polymer chain redox activity and the reversible extraction/insertion of Al³⁺ became prevalent. The hybrid electrode delivered high specific capacities, reaching 200.6, 106.3, and 44.3 mAh g⁻¹ at 0.10, 0.25, and 0.50 A g⁻¹, respectively. These values are comparable to—or even exceed—those reported for similar cathodic materials designed for Al³⁺ storage, highlighting P(EDOT-co-Py)@MWCNT hybrid as a highly promising cathode candidate for aqueous aluminum-ion energy-storage systems.