SGSangharsha Gharat

Sangharsha Gharat

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sangharsha Gharat has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermo-Chemical Modeling and Experimental Validation of Pultruded Glass Fiber Reinforced Composites

    by Jacob Harris, Sangharsha Gharat, Luohaoran Wang, Ali Zolali, Alan Taub, Mihaela Banu

    This work develops and validates thermo-chemical models for pultrusion of glass fiber–reinforced polyurethane composites on an industrial PulFlex production line. A reduced one-dimensional model combining a calibrated Kamal–Sourour (KS) cure law with an Arrhenius type chemo-rheological viscosity formulation is cross-validated against a three-dimensional ANSYS Composite Cure Simulation using identical material inputs along a three-zone, 0.9144 m heated die. Embedded thermocouples provide in-die temperature histories at 50.8 cm·min⁻¹ for calibration, while additional differential scanning calorimetry (DSC) measurements supply degree of cure (DoC) profiles for independent validation. At the industrial operating speed of 50.8 cm·min⁻¹, the mathematical and ANSYS models both reproduce the measured temperature peak location and exit temperature within a few degrees Celsius and predict a die-exit DoC of approximately 0.95, confirming near-complete curing. Using these calibrated fields as inputs to an analytical pulling-resistance formulation, both models predict comparable pulling force magnitudes and plateau behavior, demonstrating that the simplified 1D framework can capture not only thermo-chemical evolution but also process resistance trends over a range of pulling speeds. The validated 1D model therefore enables efficient exploration of speed–temperature–force tradeoffs for process window design, while the 3D ANSYS model provides a higher-fidelity reference for local gradients and future thermo–chemo–mechanical extensions.

  • Open Access

    A Theory-Guided Machine Learning and Molecular Dynamics Approach for Characterizing Fast-Curing Polyurethane Systems

    by Luohaoran Wang, Jacob Harris, Steven Mamolo, Sangharsha Gharat, Ali Zolali, Alan Taub, Mihaela Banu

    Fast-curing polyurethane (PU) systems are attractive for high-throughput manufacturing, but quantifying cure kinetics, gelation, and cure-dependent glass transition temperature (Tg) is difficult, especially at a low degree of cure (DoC). Here, a fast-reacting BASF PU formulation was studied using non-isothermal differential scanning calorimetry (DSC) at multiple heating rates, rheometry at 50 °C, and molecular dynamics (MD) simulations to extend Tgα in the low-DoC regime. DSC provided reaction enthalpy and conversion histories, and Kamal–Sourour (KS) parameters were identified by robust nonlinear fitting, reproducing conversion and curing rate profiles (R2 > 0.99 and >0.95). Rheology indicated gelation between 475 and 625 s (DoC ≈ 0.53), and DSC-based Tg at uncured, gelation, and fully cured states, established the experimental Tg trend. MD (LAMMPS) with topological crosslinking and NPT thermal scans extracted Tg from density–temperature slopes at selected DoC points. Experimental and MD Tg data were fused with Gaussian process regression constrained by the DiBenedetto relationship (5-fold cross-validation), giving λ ≈ 0.29 and confidence intervals. This framework links kinetics, gelation, and Tg evolution for fast-curing PU and identifies the low-DoC region as the main source of uncertainty.


  • Open Access

    A Theory-Guided Machine Learning and Molecular Dynamics Approach for Characterizing Fast-Curing Polyurethane Systems

    by Luohaoran Wang, Jacob Harris, Steven Mamolo, Sangharsha Gharat, Alan Taub, Ali Zolali, Mihaela Banu

    Fast-curing polyurethane (PU) systems are attractive for high throughput manufacturing, but quantifying cure kinetics, gelation, and cure-dependent glass transition temperature (Tg) is difficult, especially at low degree of cure (DoC). Here, a fast-reacting BASF PU formulation was studied using non-isothermal differential scanning calorimetry (DSC) at multiple heating rates, rheometry at 50 °C, and molecular dynamics (MD) simulations to extend Tg(α) in the low-DoC regime. DSC provided reaction enthalpy and conversion histories, and Kamal–Sourour (KS) parameters were identified by robust nonlinear fitting, reproducing conversion and curing-rate profiles (R² > 0.99 and > 0.95). Rheology indicated gelation at ~550–600 s (DoC ≈ 0.53), and DSC-based Tg at uncured, gelation, and fully cured states established the experimental Tg trend. MD (LAMMPS) with topological crosslinking and NPT thermal scans extracted Tg from density–temperature slopes at selected DoC points. Experimental and MD Tg data were fused with Gaussian process regression constrained by the DiBenedetto relationship (5-fold cross-validation), giving λ ≈ 0.28 and confidence intervals. This framework links kinetics, gelation, and Tg evolution for fast-curing PU and identifies the low-DoC region as the main source of uncertainty.