Sergey Kotyk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sergey Kotyk has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Andrii Slabkyi
Vinnytsia National Technical University
2 shared publications - Roman Obertyukh
Vinnytsia National Technical University
2 shared publications Andrіі Slabkyі
1 shared publication- Dmytro Bakalets
Vinnytsia National Technical University
1 shared publication - Oleksandr Povstyanoy
Lutsk National Technical University
1 shared publication - Sergey Sukhorukov
Vinnytsia National Technical University
1 shared publication
Latest Publications
- Open Access
- 30 March 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 23 (1) , 78-87
Method of design calculation of a parametric single-stage pressure pulse generator with adjustable pressure "closing"
On the basis of a qualitative analysis of the structure and principle of operation of a parametric single-stage pressure pulse generator with adjustable pressure "closing" p2, the design of a prototype of the generator was developed. The article describes the principle of operation of the developed structure and describes the design of structural elements and their interaction with other structural elements from the justification. The design calculation methodology is developed on the basis of generally accepted engineering and scientific principles and experience in the design and operation of equipment based on pneumatic and hydropulse drive of vibration and vibration shock machines. The paper presents a sample of initial data that is necessary for the development of a design calculation methodology for a parametric single-stage pressure pulse generator with adjustable "closing" pressure p2. Based on the analysis of the design of the prototype of the generator, the accepted initial (input) data and the experience of designing a hydropulse drive and pressure pulse generators given in the literature sources, a method of design calculation of a parametric single-stage pressure pulse generator with adjustable pressure "closing" p2 has been developed and its main energy, power and geometric parameters of the design of the prototype of both a hydropulse drive and a generator have been determined pressure pulses. The presented mathematical dependencies allow you to change the parameters of the pressure pulse generator to the corresponding technical and economic parameters of the technological process. The paper also substantiates the use of the concept of "cyclic pressure pulse coefficient", the exact value of which can be found only based on the results of experimental studies of a prototype of a pressure pulse generator. For the design calculation, based on the recommendations of the researchers of the hydropulse drive, a margin factor within 10 ... 25 percent of the face value.
- 30 March 2026
- Published by Vinnytsia National Technical University in Journal of Mechanical Engineering and Transport
- Vol. 23 (1) , 78-87
Open AccessMethod of design calculation of a parametric single-stage pressure pulse generator with adjustable pressure "closing"
On the basis of a qualitative analysis of the structure and principle of operation of a parametric single-stage pressure pulse generator with adjustable pressure "closing" p2, the design of a prototype of the generator was developed. The article describes the principle of operation of the developed structure and describes the design of structural elements and their interaction with other structural elements from the justification. The design calculation methodology is developed on the basis of generally accepted engineering and scientific principles and experience in the design and operation of equipment based on pneumatic and hydropulse drive of vibration and vibration shock machines. The paper presents a sample of initial data that is necessary for the development of a design calculation methodology for a parametric single-stage pressure pulse generator with adjustable "closing" pressure p2. Based on the analysis of the design of the prototype of the generator, the accepted initial (input) data and the experience of designing a hydropulse drive and pressure pulse generators given in the literature sources, a method of design calculation of a parametric single-stage pressure pulse generator with adjustable pressure "closing" p2 has been developed and its main energy, power and geometric parameters of the design of the prototype of both a hydropulse drive and a generator have been determined pressure pulses. The presented mathematical dependencies allow you to change the parameters of the pressure pulse generator to the corresponding technical and economic parameters of the technological process. The paper also substantiates the use of the concept of "cyclic pressure pulse coefficient", the exact value of which can be found only based on the results of experimental studies of a prototype of a pressure pulse generator. For the design calculation, based on the recommendations of the researchers of the hydropulse drive, a margin factor within 10 ... 25 percent of the face value.
- 1 January 2026
- Published by Rzeszow University of Technology in Technologia i Automatyzacja Montażu
- Vol. 131 (1) , 32-38
Theoretical research of a new design of a parametric pressure pulse generator for a vibratory hydraulic drive
Based on the results of the analysis of known circuit and structural designs of pressure pulse generators (PPG) in liquid, a new design of a single-stage parametric PPG with increased throughput capacity has been developed according to the connection diagram to the executive hydraulic cylinder of the hydraulic pulse drive (HPD) «at the inlet», the distribution links (first and second sealing stages) of which are combined with a high-rigidity slotted spring (SS). The newly designed PPG is used to control the HPD with a parametric-type actuating hydraulic cylinder. In order to create a scientifically sound methodology for the design calculation of the studied hydraulic impulse drive and PPG, a dynamic model of the HPD was developed, based on which and a sound structure of assumptions, a mathematical model of the HPD was constructed and analysed.
- 1 January 2026
- Published by Rzeszow University of Technology in Technologia i Automatyzacja Montażu
- Vol. 131 (1) , 32-38
Theoretical research of a new design of a parametric pressure pulse generator for a vibratory hydraulic drive
Based on the results of the analysis of known circuit and structural designs of pressure pulse generators (PPG) in liquid, a new design of a single-stage parametric PPG with increased throughput capacity has been developed according to the connection diagram to the executive hydraulic cylinder of the hydraulic pulse drive (HPD) «at the inlet», the distribution links (first and second sealing stages) of which are combined with a high-rigidity slotted spring (SS). The newly designed PPG is used to control the HPD with a parametric-type actuating hydraulic cylinder. In order to create a scientifically sound methodology for the design calculation of the studied hydraulic impulse drive and PPG, a dynamic model of the HPD was developed, based on which and a sound structure of assumptions, a mathematical model of the HPD was constructed and analysed.
- Open Access
- 1 January 2025
- Published by Lviv Polytechnic National University in Avtomatizacìâ virobničih procesìv u mašinobuduvannì ta priladobuduvannì
- Vol. 59, 98-107
Установка для випробування імпульсними навантаженнями на базі гідроімпульсного приводу
Problem Statement and Purpose. The lack of a methodology for studying the effect of impulse loads on ma-terials is a problem in mechanical engineering, which complicates the creation of structures with minimal safety mar-gins. The purpose of this work is to develop a drive design for an experimental test rig with an adaptive control system to study the effect of such loads on structural materials. Methodology. The methodology involves a theoretical analysis of existing test rigs and the development of a new design scheme based on a hydraulic impulse drive. A setup with a hydraulic accumulator for generating impulses is proposed, and a vibrator design with a built-in pressure impulse gen-erator and an adaptive control system has been developed. Results. Technical requirements for impulse testing instal-lations have been formulated. A schematic diagram of the drive has been developed, which can be installed on existing machines, and a design for a hydraulic impulse vibrator with an adaptive system to maintain constant load parameters has been proposed. Scientific Novelty and Practical Significance. The scientific novelty lies in the application of a hydraulic impulse drive with an adaptive system for material testing, which has not been described in the literature. The practical significance is the possibility of upgrading existing testing machines to obtain data on the behavior of materials under impulse loads, which will allow for more precise design of structures. Directions for Further Research. Further research should involve creating a prototype of the setup and conducting experiments to determine the mechanical properties of materials under impulse loads to verify the theoretical developments.
- 1 January 2025
- Published by Lviv Polytechnic National University in Avtomatizacìâ virobničih procesìv u mašinobuduvannì ta priladobuduvannì
- Vol. 59, 98-107
Open AccessУстановка для випробування імпульсними навантаженнями на базі гідроімпульсного приводу
Problem Statement and Purpose. The lack of a methodology for studying the effect of impulse loads on ma-terials is a problem in mechanical engineering, which complicates the creation of structures with minimal safety mar-gins. The purpose of this work is to develop a drive design for an experimental test rig with an adaptive control system to study the effect of such loads on structural materials. Methodology. The methodology involves a theoretical analysis of existing test rigs and the development of a new design scheme based on a hydraulic impulse drive. A setup with a hydraulic accumulator for generating impulses is proposed, and a vibrator design with a built-in pressure impulse gen-erator and an adaptive control system has been developed. Results. Technical requirements for impulse testing instal-lations have been formulated. A schematic diagram of the drive has been developed, which can be installed on existing machines, and a design for a hydraulic impulse vibrator with an adaptive system to maintain constant load parameters has been proposed. Scientific Novelty and Practical Significance. The scientific novelty lies in the application of a hydraulic impulse drive with an adaptive system for material testing, which has not been described in the literature. The practical significance is the possibility of upgrading existing testing machines to obtain data on the behavior of materials under impulse loads, which will allow for more precise design of structures. Directions for Further Research. Further research should involve creating a prototype of the setup and conducting experiments to determine the mechanical properties of materials under impulse loads to verify the theoretical developments.