Recycling waste expanded polystyrene as aggregate in produc-tion of lightweight screed mortar
Open Access
- 1 January 2023
- journal article
- research article
- Published by Pontificia Universidad Catolica de Chile in Revista de la construcción
- Vol. 22 (3) , 581-596
Abstract
The potential use of waste-expanded polystyrene (EPS) beads in the production of lightweight screed mortar (LSM) was investigated. LSM specimens were produced by replacing waste EPS with normal weight aggregate at 20%, 40%, 60%, 80%, and 100% proportions by volume. Workability, unit weight, capillarity, flexural and compressive strength, abrasion resistance, drying shrinkage, and thermal conductivity of the LSMs were determined. Waste EPS replacement by the normal weight aggregate reduced the abrasion resistance and strength properties of LSMs. Waste EPS also caused the LSMs to have lower unit weight and thermal conductivity, significantly. It was concluded that substitution of waste EPS by normal weight aggregate up to 60% can be proposed for adequate strength and heat-insulating properties of LSMs. LSM produced with 60% waste EPS (M60) has 16.3 MPa 28th-day compressive strength with 0.4562 W/m.K thermal conductivity and 1.35 g/cm3 unit weight. Moreover, the recovery of waste EPS contributes to both reducing environmental pollution and storage problems.Keywords
This publication has 29 references indexed in Scilit:
- Lightweight thermal insulating coating mortars with aerogel, EPS, and vermiculite for energy conservation in buildingsCement and Concrete Composites, 2022
- Development of eco-efficient lightweight self-compacting concrete with high volume of recycled EPS waste materialsEnvironmental Science and Pollution Research, 2021
- Experimental and microstructural study of the compressive strength of concrete samples containing low volumes of expanded polystyrene beadsStructural Concrete, 2019
- Mechanical and thermal properties of lightweight geopolymer compositesCement and Concrete Composites, 2018
- Lightweight screed containing cork granules: Mechanical and hygrothermal characterizationCement and Concrete Composites, 2014
- Cyclic behaviour of a lightweight mortar with cork granulate compositeComposite Structures, 2013
- Advances in alternative cementitious bindersCement and Concrete Research, 2011
- Sustainable acoustic and thermal insulation materials from elastomeric waste residuesChemical Engineering Science, 2011
- Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastesCement and Concrete Composites, 2008
- Characterization and simulation of microstructure and properties of EPS lightweight concreteCement and Concrete Research, 2007