Investigation of functional core-rim composite part production by inserted powder injection moulding
- 26 December 2019
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 36 (3) , 293-298
Abstract
In this study, the use of Cu and Ni interlayers have been investigated for functional core-rim composite part production with WC-Co 9 wt-% feedstock/steel. For this purpose, different experiments have been performed and joining condition, shear strength and microstructure of the intermediate region have been examined. It has been found that AISI 4340 insert/WC-Co have been joined and 85.8 MPa shear strength achieved, but high speed steel insert has not joined. Moreover, it has been determined that better results are obtained with Ni interlayer. Under the same conditions, when the 40 µm Ni interlayer has been used between AISI 4340 core and WC-Co rim, shear strength has been increased approximately twice and has been 162.7 MPa.Keywords
Funding Information
- Gazi Üniversitesi (07/2016-21)
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (115M437)
This publication has 27 references indexed in Scilit:
- Microstructure and mechanical behavior of dissimilar AISI 304L/WC-Co cermet rotary friction weldsMaterials Science and Engineering: A, 2019
- Rapid diffusion bonding of WC-Co cemented carbide to 40Cr steel with Ni interlayer: Effect of surface roughness and interlayer thicknessCeramics International, 2016
- Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayerMaterials Science and Engineering: A, 2009
- Grain growth during the early stage of sintering of nanosized WC–Co powderInternational Journal of Refractory Metals and Hard Materials, 2008
- Defect-free sintering of two material powder injection molded components Part I Experimental investigationsJournal of Materials Science, 2003
- Effect of residual stress on the strength of an alumina–steel joint by partial transient liquid phase (PTLP) brazingJournal of Materials Processing Technology, 2002
- Formation/consolidation of WC-Co cermets by simple shearScripta Materialia, 2000
- Finite element analysis of thermal residual stresses at graded ceramic-metal interfaces. Part I. Model description and geometrical effectsJournal of Applied Physics, 1993
- Effect of plastic deformation on residual stresses in ceramic/metal interfacesMetallurgical Transactions A, 1991
- Thermal Residual Stresses in Ceramic‐to‐Metal Brazed JointsJournal of the American Ceramic Society, 1991