Compact Integrated Transformer – Grid Inductor Structure for E-Capless Single-Stage EV Charger
- 23 September 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (2) , 2115-2126
Abstract
This article proposes a planar magnetic integration technique that combines the grid inductors and transformer in the single-stage E-capless electric vehicle charger into one core. The proposed integration technique reduces the number of magnetic components; therefore, the cost, total magnetic core loss, and volume can be significantly reduced. Using the integrated structure, the overall converter power density increases up to 11.1% compared to the nonintegrated one. This article also presents a detailed analysis of the optimal printed circuit board (PCB) winding arrangement considering both ac resistance and winding stray capacitance. Due to the high dc resistance of PCB winding, Litz wire was also considered for the proposed integrated structure. The effectiveness of the proposed structure was validated by implementing it on a 3.7-kW prototype of a single-stage ac–dc converter. Results show that the prototype with the proposed integrated structure achieved higher efficiency with both PCB winding and Litz wire. Peak efficiency of 97.17% and 6.55-kW/L power density were achieved.Keywords
Funding Information
- National Research Foundation of Korea
- Korea government (2020R1A2C2006301)
This publication has 29 references indexed in Scilit:
- Applying Variable-Switching-Frequency Variable-Phase-Shift Control and E-Mode GaN HEMTs to an Indirect Matrix Converter-Based EV Battery ChargerIEEE Transactions on Transportation Electrification, 2017
- High-Efficiency High-Density Critical Mode Rectifier/Inverter for WBG-Device-Based On-Board ChargerIEEE Transactions on Industrial Electronics, 2017
- Planar Transformers With Near-Zero Common-Mode Noise for Flyback and Forward ConvertersIEEE Transactions on Power Electronics, 2017
- An Integrated Battery Charger With High Power Density and Efficiency for Electric VehiclesIEEE Transactions on Power Electronics, 2016
- LLC Converters With Planar Transformers: Issues and MitigationIEEE Transactions on Power Electronics, 2016
- Impact of planar transformer winding capacitance on Si-based and GaN-based LLC resonant converter2013
- Comparison of Realization Techniques for PFC Inductor Operating in Discontinuous Conduction ModeIEEE Transactions on Power Electronics, 2004
- Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters2003
- Stray capacitances of two winding transformers: equivalent circuit, measurements, calculation and lowering2002
- Optimal choice for number of strands in a litz-wire transformer windingIEEE Transactions on Power Electronics, 1999