Scalable transfer printing approach to heterogeneous integration of InP lasers on silicon-on-insulator waveguide platform
Open Access
- 19 August 2024
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (8)
Abstract
InP-based edge-emitting O-band lasers are integrated onto silicon photonics circuit employing micro-transfer printing technology. Blocks of unpatterned InP gain material of typical size 1000 × 60 μ m2 are first transferred onto 400 nm thick silicon rib waveguides with the fabrication steps performed on the target wafer to realize the final lasers. As a result, the InP ridge waveguides are aligned with lithographic accuracy to the underlying Si waveguides resulting in an approach free from any misalignment stemming from the transfer printing process. The fabricated Distributed Bragg Reflector laser shows lasing around 100 mA current injection with minimum 1 mW of output power coupled to a single mode fiber. This integration method paves a reliable route toward scaling-up the integration of active devices such as lasers, modulators, and detectors on 300-mm diameter silicon wafers, which requires high-uniformity across the wafer.Keywords
Funding Information
- Science Foundation Ireland (12/RC/2276_P2)
- Intel Corporation
This publication has 42 references indexed in Scilit:
- Adhesive-free bonding for hetero-integration of InP based coupons micro-transfer printed on SiO2 into Complementary Metal-Oxide-Semiconductor backend for Si photonics application on 8″ wafer platformThin Solid Films, 2024
- Integrated reconstructive spectrometer with programmable photonic circuitsNature Communications, 2023
- Advances in cost-effective integrated spectrometersLight: Science & Applications, 2022
- A monolithic InP/SOI platform for integrated photonicsLight: Science & Applications, 2021
- An optical neural chip for implementing complex-valued neural networkNature Communications, 2021
- High-speed III-V nanowire photodetector monolithically integrated on SiNature Communications, 2020
- Adhesive wafer bonding with ultra-thin intermediate polymer layersSensors and Actuators A: Physical, 2017
- Transfer print techniques for heterogeneous integration of photonic componentsProgress in Quantum Electronics, 2017
- Room-temperature InP distributed feedback laser array directly grown on siliconNature Photonics, 2015
- Wafer-scale integration of group III–V lasers on silicon using transfer printing of epitaxial layersNature Photonics, 2012