Chemical constitution of coatings deposited under hexamethyldisiloxane activation in a glow discharge in a gas flow
Authors:
- Institute of High Current Electronics of the Siberian Branch of RASIRInstitute of High Current Electronics of the Siberian Branch of RAS
- Даниил Александрович ЗузаДЗДаниил Александрович Зуза
- Vitaly O. NekhoroshevVNVitaly O. Nekhoroshev
- Alexander V. BatrakovABAlexander V. Batrakov
- Irina A. KurzinaIrina A. Kurzina
- Tomsk State UniversityTUTomsk State University
Open Access
- 1 January 2024
- journal article
- Published by Tomsk State University in Vestnik Тomskogo gosudarstvennogo universiteta. Khimiya
- No. 34,p. 106-119
Abstract
The aim of the present work is to reveal peculiarities and regularities of formation of chemical constitution of polymer-like coatings deposited under plasmachemical activation of hexamethyldisiloxane in cathode layers and positive column plasma of glow discharge. The glow discharge was maintained in an argon/hexamethyldisiloxane mixture flow. The argon flow rate was 230 mg/min. The coatings were deposited in six different modes of the plasma-chemical system. The modes were determined by the flow rate of hexamethyldisiloxane, which ranged from 1 to 10 mg/min, and the average discharge current, which was set between 5 and 50 mA. The chemical constitution of the obtained coatings was identified using X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. It is shown that varying the discharge current and hexamethyldisiloxane flow rate in this system produces a wide range of coatings of different chemical constitution. Four different types of coatings obtained were identified: polymethylsiloxane-like structure cross-linked with aliphatic hydrocarbon links with high (C/Si = 9.4) and low (C/Si = 2.9) hydrocarbon linkages, polyhedral oligomeric silsesquioxanes cross-linked with carbosilane, siloxane and aliphatic links with high (C/Si = 5.1) and low (C/Si = 1.5) hydrocarbon linkages. A significant effect of hexamethyldisiloxane flow rate on the chemical structure was found. The most interesting feature of some of the obtained organosilicon coatings is the high relative carbon content. The amount of hydrocarbon links in the coating was found to increase with discharge current. The assumption of formation of hydrocarbon film-forming particles in the cathode layers of the discharge due to ion-induced processes is put forward.Keywords
This publication has 16 references indexed in Scilit:
- Low-energy Ar+ ion-beam-induced chemical vapor deposition of silicon dioxide films using tetraethyl orthosilicateHeliyon, 2023
- Characterization of NMR, IR, and Raman spectra for siloxanes and silsesquioxanes: a mini reviewJournal of Sol-Gel Science and Technology, 2022
- Structure and gas separation properties of ultra-smooth PE-CVD silicon organic coated composite membranesSurface and Coatings Technology, 2021
- Mechanical properties of plasma polymer films: a reviewSN Applied Sciences, 2021
- Power Supply for Generation of Low-Temperature Plasma JetsRussian Physics Journal, 2020
- Characterization of the deposition behavior and changes in bonding structures of hexamethyldisiloxane and decamethylcyclopentasiloxane atmospheric plasma‐deposited films*Plasma Processes and Polymers, 2019
- Microporous organosilica membranes for gas separation prepared via PECVD using different O/Si ratio precursorsJournal of Membrane Science, 2015
- Effect of the polycarbosilane structure on its final ceramic yieldJournal of the European Ceramic Society, 2008
- Plasma based Ar+ beam assisted poly(dimethylsiloxane) surface modificationNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2005
- Titanium deposition onto ion-bombarded and plasma-treated polydimethylsiloxane: Surface modification, interface and adhesionThin Solid Films, 1986