Optimized Acoustic Phantom Design for Characterizing Body Sound Sensors
Open Access
Abstract
Many commercial and prototype devices are available for capturing body sounds that provide important information on the health of the lungs and heart; however, a standardized method to characterize and compare these devices is not agreed upon. Acoustic phantoms are commonly used because they generate repeatable sounds that couple to devices using a material layer that mimics the characteristics of skin. While multiple acoustic phantoms have been presented in literature, it is unclear how design elements, such as the driver type and coupling layer, impact the acoustical characteristics of the phantom and, therefore, the device being measured. Here, a design of experiments approach is used to compare the frequency responses of various phantom constructions. An acoustic phantom that uses a loudspeaker to generate sound and excite a gelatin layer supported by a grid is determined to have a flatter and more uniform frequency response than other possible designs with a sound exciter and plate support. When measured on an optimal acoustic phantom, three devices are shown to have more consistent measurements with added weight and differing positions compared to a non-optimal phantom. Overall, the statistical models developed here provide greater insight into acoustic phantom design for improved device characterization.Keywords
This publication has 24 references indexed in Scilit:
- Acoustic characterization of stethoscopes using auscultation sounds as test signalsThe Journal of the Acoustical Society of America, 2017
- Accelerometer-Based Acoustic Control: Enabling Auscultation on a Black Hawk HelicopterIEEE/ASME Transactions on Mechatronics, 2016
- Active and passive stethoscope frequency transfer functions: Electronic stethoscope frequency response2014
- Investigating a compact phantom and setup for testing body sound transducersComputers in Biology and Medicine, 2011
- Air-Borne and Tissue-Borne Sensitivities of Bioacoustic Sensors Used on the Skin SurfaceIEEE Transactions on Biomedical Engineering, 2008
- Design, construction, and evaluation of a bioacoustic transducer testing (BATT) system for respiratory soundsIEEE Transactions on Biomedical Engineering, 2006
- Methods and results in characterizing electronic stethoscopes2003
- Measurement of Respiratory Acoustic SignalsChest, 1995
- Comparison of the acoustic properties of six popular stethoscopesThe Journal of the Acoustical Society of America, 1992
- Stethoscope AcousticsCirculation, 1966