Single-mechanical-port dual-rotor motors (DRMs) represent a promising topology for next-generation electric machines (EMs). However, the optimal parameter-matching principle between the two rotors and the stator in radial-flux configurations has not been sufficiently explored due to geometric asymmetry. This article proposes a parameter-matching principle that explicitly exploits the magnetic coupling effect. By conceptually segregating the DRM into two equivalent single-rotor EMs, the proposed principle enables accurate identification of optimally matched DRM designs, independent of optimization history. Targeting in-wheel motor (IWM) applications, the influence of parameter matching on torque and loss is systematically analyzed in the torque–loss power design space. A set of effective matching conditions are then formulated based on coupling-related geometric metrics. Additional influencing factors, including operating condition fluctuations and core material variations, are also investigated. Results reveal that the effective matching envelope primarily occupies the central region of the Pareto front rather than covering all Pareto-optimal designs. This highlights the necessity of coupling-based selection to avoid arbitrary choices from Pareto fronts. Finally, an automotive-grade DRM prototype designed under the proposed principle was fabricated and experimentally validated, achieving a peak torque exceeding 1500 Nm and a maximum efficiency above 92%, confirming the effectiveness of the proposed principle.