Suction side film cooling measurements in a linear high-temperature cascade at near-engine conditions
Open Access
- 17 November 2025
- journal article
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 9, 213-223
Abstract
Film-cooled turbine blades in a Linear High-Temperature Cascade are investigated experimentally and numerically at a Reynolds number of 120,000, low inlet Mach numbers (Ma=0.2), and main flow temperatures of up to 1,050K. Variations in cooling air temperature are used to achieve different density ratios. In addition, the cooling air mass flow is varied for different coolant mass flow ratios. The blades are derived from the mid-section of a high-pressure turbine blade and feature a single row of film cooling holes on the suction side. They are equipped with 66 thermocouples and 37 pressure taps. Film cooling reduces the material temperature in the region downstream of the holes up to 65% of the chord length. High mass ratios of MR>1.0% result in a reversal of the cooling effect due to the detachment of the cooling film. In summary, we provide temperature and pressure measurements of a film-cooled turbine blade at realistic density and mass flow ratios utilizing a unique linear cascade supplied with high-temperature exhaust gas flow. Our paper contributes to the validation of numerical codes used for the thermal design of turbine blades.Keywords
This publication has 19 references indexed in Scilit:
- Computational Fluid Dynamics Evaluations of Film Cooling Flow Scaling Between Engine and Experimental ConditionsJournal of Turbomachinery, 2016
- A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine ApplicationsJournal of Engineering for Gas Turbines and Power, 2015
- Influence of Coolant Density on Turbine Blade Film-Cooling Using Pressure Sensitive Paint TechniqueJournal of Turbomachinery, 2011
- A Correlation-Based Transition Model Using Local Variables—Part I: Model FormulationJournal of Turbomachinery, 2004
- Evaluation tests of 1700 °C class turbine cooled blades for a hydrogen fueled combustion turbine systemHeat Transfer, 2003
- An explicit algebraic Reynolds stress model for incompressible and compressible turbulent flowsJournal of Fluid Mechanics, 2000
- High-Resolution Measurements of Local Heat Transfer Coefficients From Discrete Hole Film CoolingJournal of Turbomachinery, 1999
- Measurements of Heat Transfer Distribution Over the Surfaces of Highly Loaded Turbine Nozzle Guide VanesJournal of Engineering for Gas Turbines and Power, 1984
- Film Cooling of a Gas Turbine BladeJournal of Engineering for Power, 1978
- Film Cooling1971