MRMichael Rabs

Michael Rabs

*This is an algorithmically generated author record based on publicly available information.

Michael Rabs has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Suction side film cooling measurements in a linear high-temperature cascade at near-engine conditions

    by Jan Lemmer, Yanik Kleine-Hollenhorst, Viola Dehe, Peter Jeschke, Michael Rabs

    Film-cooled turbine blades in a Linear High-Temperature Cascade are investigated experimentally and numerically at a Reynolds number of 120,000, low inlet Mach numbers (Ma=0.2), and main flow temperatures of up to 1,050K. Variations in cooling air temperature are used to achieve different density ratios. In addition, the cooling air mass flow is varied for different coolant mass flow ratios. The blades are derived from the mid-section of a high-pressure turbine blade and feature a single row of film cooling holes on the suction side. They are equipped with 66 thermocouples and 37 pressure taps. Film cooling reduces the material temperature in the region downstream of the holes up to 65% of the chord length. High mass ratios of MR>1.0% result in a reversal of the cooling effect due to the detachment of the cooling film. In summary, we provide temperature and pressure measurements of a film-cooled turbine blade at realistic density and mass flow ratios utilizing a unique linear cascade supplied with high-temperature exhaust gas flow. Our paper contributes to the validation of numerical codes used for the thermal design of turbine blades.

  • Open Access

    Heat Transfer in a Square Ribbed Channel: Evaluation of Turbulent Heat Transfer Models

    by Beate Wörz, Mark Wieler, Viola Dehe, Peter Jeschke, Michael Rabs

    This paper presents the results of integral heat transfer measurements taken in a square ribbed cooling channel configuration for evaluating heat transfer and turbulent flow characteristics in convective cooled gas turbine blades and draws a comparison with numerical results. The heated section of the channel is either smooth or equipped with 45 ∘ crossed ribs on two opposite walls. The first part of the paper describes the instrumentation and experimental setup in detail. The second part compares the numerical calculations with the experimentally determined results. The turbulent heat transfer is calculated using two common algebraic models and three implemented explicit algebraic models, each time in combination with an explicit algebraic Reynolds stress model. The numerical calculations show that the use of higher-order models for the turbulent heat flux provides a higher accuracy of the heat transfer prediction for both configurations. The best model is able to predict almost all results within the experimental uncertainties.