Jan Lemmer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jan Lemmer has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Christian B. Schmitz
Industrial Science GmbH, Darmstadt
1 shared publication - Michael Rabs
MAN Energy Solutions SE Steinbrinkstraße 1 46145 Oberhausen Germany
1 shared publication - Peter Franz Pelz
Technische Universität Darmstadt
1 shared publication - Peter Jeschke
Institute of Jet Propulsion and Turbomachinery, RWTH Aachen University, Aachen, Germany
1 shared publication - Viola Dehe
Institute of Jet Propulsion and Turbomachinery RWTH Aachen University Templergraben 55 52062 Aachen Germany
1 shared publication - Yanik Kleine-Hollenhorst
Institute of Jet Propulsion and Turbomachinery RWTH Aachen University Templergraben 55 52062 Aachen Germany
1 shared publication
Latest Publications
- Open Access
- 17 November 2025
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 9, 213-223
Suction side film cooling measurements in a linear high-temperature cascade at near-engine conditions
Film-cooled turbine blades in a Linear High-Temperature Cascade are investigated experimentally and numerically at a Reynolds number of 120,000, low inlet Mach numbers (Ma=0.2), and main flow temperatures of up to 1,050K. Variations in cooling air temperature are used to achieve different density ratios. In addition, the cooling air mass flow is varied for different coolant mass flow ratios. The blades are derived from the mid-section of a high-pressure turbine blade and feature a single row of film cooling holes on the suction side. They are equipped with 66 thermocouples and 37 pressure taps. Film cooling reduces the material temperature in the region downstream of the holes up to 65% of the chord length. High mass ratios of MR>1.0% result in a reversal of the cooling effect due to the detachment of the cooling film. In summary, we provide temperature and pressure measurements of a film-cooled turbine blade at realistic density and mass flow ratios utilizing a unique linear cascade supplied with high-temperature exhaust gas flow. Our paper contributes to the validation of numerical codes used for the thermal design of turbine blades.
- 17 November 2025
- Published by Global Power and Propulsion Society in Journal of the Global Power and Propulsion Society
- Vol. 9, 213-223
Open AccessSuction side film cooling measurements in a linear high-temperature cascade at near-engine conditions
Film-cooled turbine blades in a Linear High-Temperature Cascade are investigated experimentally and numerically at a Reynolds number of 120,000, low inlet Mach numbers (Ma=0.2), and main flow temperatures of up to 1,050K. Variations in cooling air temperature are used to achieve different density ratios. In addition, the cooling air mass flow is varied for different coolant mass flow ratios. The blades are derived from the mid-section of a high-pressure turbine blade and feature a single row of film cooling holes on the suction side. They are equipped with 66 thermocouples and 37 pressure taps. Film cooling reduces the material temperature in the region downstream of the holes up to 65% of the chord length. High mass ratios of MR>1.0% result in a reversal of the cooling effect due to the detachment of the cooling film. In summary, we provide temperature and pressure measurements of a film-cooled turbine blade at realistic density and mass flow ratios utilizing a unique linear cascade supplied with high-temperature exhaust gas flow. Our paper contributes to the validation of numerical codes used for the thermal design of turbine blades.
- Open Access
- 19 December 2022
- Published by European Wave and Tidal Energy Conference in International Marine Energy Journal
- Vol. 5 (3) , 239-247
Misled by Betz and unsteady flow
A turbine array is an adjustable flow resistance R placed in a tidal channel. Ideally, it is designed and operated to maximise energy yield. Garrett & Cummins (2005), using optimal control theory applied to the RCelement channel (R) and basin (C), showed: the energy extraction from the flow PT + PD is maximised when the flow rate is slowed down by a factor of 1/√3. This result is independent of the ratio of the extracted mechanical power PT to the total power extraction including the power loss PD due to the mixing of the bypass flows within the turbine field. The optimisation task for turbine arrays is maximising PT. This objective raises two questions: ”What is the maximum power PT that can be extracted, and what is the optimal design (size, topology) and operation to achieve this output?” When addressing them, the literature still uses the Betz ‘limit’ as a reference. The work presented highlights two major problems. First, the Betz ’limit’ is not a constant upper bound for open channel flow. This problem has been discussed and solved by the first author (2011, 2020). Second and more importantly, the presented paper points out the misconception under which several research studies referred to array topologies as ‘optimal’ with regard to design and operation. Hereby, the presented paper contributes to the advancement of tidal power on an axiomatic basis. The misleading by Betz and overvaluing of transient effects is made transparent in a scientific discourse.
- 19 December 2022
- Published by European Wave and Tidal Energy Conference in International Marine Energy Journal
- Vol. 5 (3) , 239-247
Open AccessMisled by Betz and unsteady flow
A turbine array is an adjustable flow resistance R placed in a tidal channel. Ideally, it is designed and operated to maximise energy yield. Garrett & Cummins (2005), using optimal control theory applied to the RCelement channel (R) and basin (C), showed: the energy extraction from the flow PT + PD is maximised when the flow rate is slowed down by a factor of 1/√3. This result is independent of the ratio of the extracted mechanical power PT to the total power extraction including the power loss PD due to the mixing of the bypass flows within the turbine field. The optimisation task for turbine arrays is maximising PT. This objective raises two questions: ”What is the maximum power PT that can be extracted, and what is the optimal design (size, topology) and operation to achieve this output?” When addressing them, the literature still uses the Betz ‘limit’ as a reference. The work presented highlights two major problems. First, the Betz ’limit’ is not a constant upper bound for open channel flow. This problem has been discussed and solved by the first author (2011, 2020). Second and more importantly, the presented paper points out the misconception under which several research studies referred to array topologies as ‘optimal’ with regard to design and operation. Hereby, the presented paper contributes to the advancement of tidal power on an axiomatic basis. The misleading by Betz and overvaluing of transient effects is made transparent in a scientific discourse.