Stress Management of Wind Turbine Components Using a Nano-Enhanced Phase Change Material Integrated Power Module
- 26 June 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (11) , 16979-16994
Abstract
Offshore wind turbine components endure high mechanical and thermal stress due to fluctuating wind conditions and harsh marine environments, but lack coordinated stress management due to the low thermal inertia of the power electronic system. Frequent and large pitch movements further aggravate component stress. This article introduces a power module packaging method that integrates nano-enhanced phase change materials (PCMs) to provide short-term overload capability. By mixing PCMs with carbon nanotubes, the thermal resistance per insulated gate bipolar transistor (IGBT) of the nano-enhanced PCM module is reduced by 34% and 14% compared to the conventional module and PCM module respectively due to the increased thermal conductivity of PCMs. Finite element analysis and experimental results demonstrate the superior thermal performance of the nano-enhanced PCM module over traditional modules. Based on this improved functionality, a stress management strategy is proposed to mitigate mechanical stress on the pitch system by increasing the rated wind speed and temporarily overloading the turbine powertrain system. Statistical analysis based on real wind speed profiles validates the strategy’s effectiveness, showing a reduction in the number of pitch angle cycles by up to 86% .Keywords
Funding Information
- Zhuzhou CRRC Times Electric U.K. Innovation Centre
- State Key Laboratory of Electrical Insulation and Power Equipment (EIPE22212)
- U.K. EPSRC
This publication has 57 references indexed in Scilit:
- Controllable construction of CNT-Interconnected liquid metal networks for thermal managementComposites Part A: Applied Science and Manufacturing, 2023
- Reliability of electrical and hydraulic pitch systems in wind turbines based on field-data analysisEnergy Reports, 2023
- An overview of the offshore wind energy potential for twelve significant geographical locations across the globeEnergy Reports, 2022
- Calibration of differential scanning calorimeter (DSC) for thermal properties analysis of phase change materialJournal of Thermal Analysis and Calorimetry, 2020
- Preparations, Characteristics and Applications of the Functional Liquid Metal MaterialsAdvanced Engineering Materials, 2017
- Fatigue life prediction of turbine blades based on a modified equivalent strain modelJournal of Mechanical Science and Technology, 2017
- PCM based heat sinks of paraffin/nanoplatelet graphite composite for thermal management of IGBTApplied Thermal Engineering, 2017
- Thermal analysis of melting and freezing processes of phase change materials (PCMs) based on dynamic DSC testEnergy and Buildings, 2016
- Enhancement of heat transfer for thermal energy storage application using stearic acid nanocomposite with multi-walled carbon nanotubesEnergy, 2013
- The effect of carbon nanotubes in enhancing the thermal transport properties of PCM during solidificationHeat and Mass Transfer, 2012