Tooth friction in spur gear transmission. From local to mean tooth friction loss
- 28 August 2024
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 238 (12) , 1583-1592
Abstract
In a gear transmission, power losses come from a variety of sources, classified as load-dependent and no-load-dependent losses. No-load-dependent losses are the ones that remain constant regardless of the applied load, such as losses due to drag in rolling element bearings, seals, churning and/or windage for gears. Load-dependent losses include friction losses due to sliding and rolling between gear teeth. These losses are particularly important in some gear transmissions because of their direct impact on overall efficiency and thermal behaviour. Consequently, knowledge of the friction coefficient associated to this loss is of major interest for optimising gears (geometry, surface finish, lubrication, etc.). In this article, a new method is proposed for predicting the mechanical efficiency losses associated with the mean coefficient of friction for pairs of cylindrical gears. It is based on a model developed previously to estimate the instantaneous tooth friction along the plane of action in gears. This model takes into account the lubricant shear and the friction on contacting asperities. The proposed mean friction coefficient is deduced from the instantaneous friction coefficient using specific calculations, particularly at the pitch point. To verify the method, the estimated results are compared with those in the literature calculated for gears and operating conditions common on FZG test rigs.Keywords
This publication has 11 references indexed in Scilit:
- On the interest of a semi-empirical model for the tooth friction coefficient in gear transmissionsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021
- Gearbox power loss. Part II: Friction losses in gearsTribology International, 2015
- Estimation of Sliding Loss in a Parallel-Axis Gear PairJournal of Advanced Mechanical Design, Systems, and Manufacturing, 2012
- An Analytical Approach to Tooth Friction Losses in Spur and Helical Gears—Influence of Profile ModificationsJournal of Mechanical Design, 2009
- Prediction of Power Losses Due to Tooth Friction in GearsTribology Transactions, 2006
- A Frictional Efficiency Loss Model for Helical Gears2005
- Determination of power losses in gear transmissions with rolling and sliding friction incorporatedMechanism and Machine Theory, 2002
- Elastohydrodynamics of gears1997
- Paper 11: Lubrication of Involute GearingProceedings of the Institution of Mechanical Engineers, Conference Proceedings, 1967
- The lubrication of rollers III. A theoretical discussion of friction and the temperatures in the oil filmPhilosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1961