Photodeposition‐Based Synthesis of TiO2@IrOx Core–Shell Catalyst for Proton Exchange Membrane Water Electrolysis with Low Iridium Loading
Authors:
- Darius HoffmeisterDHDarius Hoffmeister
- Selina FingerSFSelina Finger
- Lena FiedlerLFLena Fiedler
- Tien‐Ching MaTMTien‐Ching Ma
- Andreas KörnerAKAndreas Körner
- Matej ZlatarMZMatej Zlatar
- Birk FritschBFBirk Fritsch
- Kerstin Witte BodnarKBKerstin Witte Bodnar
- Simon CarlSCSimon Carl
- Benjamin Apeleo ZubiriBZBenjamin Apeleo Zubiri
- Johannes WillJWJohannes Will
Open Access
- 14 June 2024
- journal article
- research article
- Published by Wiley in Advanced Science
- Vol. 11 (30) , e2402991
Abstract
The widespread application of green hydrogen production technologies requires cost reduction of crucial elements. To achieve this, a viable pathway to reduce the iridium loading in proton exchange membrane water electrolysis (PEMWE) is explored. Herein, a scalable synthesis method based on a photodeposition process for a TiO2@IrOx core–shell catalyst with a reduced iridium content as low as 40 wt.% is presented. Using this synthesis method, titania support particles homogeneously coated with a thin iridium oxide shell of only 2.1 ± 0.4 nm are obtained. The catalyst exhibits not only high ex situ activity, but also decent stability compared to commercially available catalysts. Furthermore, the unique core–shell structure provides a threefold increased electrical powder conductivity compared to structures without the shell. In addition, the low iridium content facilitates the fabrication of sufficiently thick catalyst layers at decreased iridium loadings mitigating the impact of crack formation in the catalyst layer during PEMWE operation. It is demonstrated that the novel TiO2@IrOx core–shell catalyst clearly outperforms the commercial reference in single‐cell tests with an iridium loading below 0.3 mgIr cm−2 exhibiting a superior iridium‐specific power density of 17.9 kW gIr−1 compared to 10.4 kW gIr−1 for the commercial reference.Keywords
All Related Versions
Funding Information
- Deutsche Forschungsgemeinschaft (416229255)
- European Research Council (786475)
This publication has 62 references indexed in Scilit:
- Directly Coated Iridium Nickel Oxide on Porous‐Transport Layer as Anode for High‐Performance Proton‐Exchange Membrane Water ElectrolyzersAdvanced Materials Interfaces, 2023
- Essentials of High Performance Water Electrolyzers – From Catalyst Layer Materials to Electrode EngineeringAdvanced Energy Materials, 2021
- Oxygen Evolution Reaction on Tin Oxides Supported Iridium Catalysts: Do We Need Dopants?ChemElectroChem, 2020
- Current Challenges in Catalyst Development for PEM Water ElectrolyzersChemie Ingenieur Technik, 2019
- Iridium‐Chromium Oxide Nanowires as Highly Performed OER Catalysts in Acidic MediaChemCatChem, 2019
- Towards maximized utilization of iridium for the acidic oxygen evolution reactionNano Research, 2019
- Oxygen Evolution Catalysts Based on Ir–Ti Mixed Oxides with Templated Mesopore Structure: Impact of Ir on Activity and ConductivityChemSusChem, 2018
- The electronic structure of iridium and its oxidesSurface and Interface Analysis, 2015
- A model for anodic hydrous oxide growth at iridiumJournal of Electroanalytical Chemistry and Interfacial Electrochemistry, 1987
- The influence of the crystal lattice structure on the conduction band energy of oxides of titanium(IV)Chemical Physics Letters, 1985