Investigation of Sinterability of WC-Co Component Comprising of AISI 4340 Steel Inserts
Open Access
- 1 December 2023
- journal article
- research article
- Published by Gazi University Journal of Science in Gazi University Journal of Science
- Vol. 36 (4) , 1722-1731
Abstract
In this study, sinterability of WC-9% Co component with AISI 4340 steel insert was investigated using Inserted Powder Injection Molding (IPIM) method. Sintering experiments were performed at temperatures of 1200 °C to 1350 °C with dwell times of 120, 240, 360 min. Defects such as gaps, cracks and macro-porosities were observed in specimens, sintered at temperatures of 1200 °C and 1250 °C for all dwell times. It was proved that sintering temperature of 1350 °C was as high as it caused insert to get deformed and melted. As a result, the optimum sintering temperature and dwell time were determined to be 1300 °C and 240 min, respectively, at which the highest hardness, compression strength, and sintered density were obtained without any defects such as cracks or gaps.Keywords
Funding Information
- The Scientific and Technological Research Council of Turkey (115M437)
This publication has 24 references indexed in Scilit:
- Near-nano WC–Co hardmetals: Will they substitute conventional coarse-grained mining grades?International Journal of Refractory Metals and Hard Materials, 2010
- Sinterbonding cobalt-cemented tungsten carbide to tungsten heavy alloysInternational Journal of Refractory Metals and Hard Materials, 2009
- On the mechanism of WC coarsening in WC–Co hardmetals with various carbon contentsInternational Journal of Refractory Metals and Hard Materials, 2009
- A research on the grain growth of WC–Co cemented carbideInternational Journal of Refractory Metals and Hard Materials, 2007
- Mechanical properties of WC/Co cemented carbide with larger WC grain sizeMaterials Characterization, 2005
- Liquid phase sintering of functionally graded WC–Co compositesInternational Journal of Refractory Metals and Hard Materials, 2005
- Defect-free sintering of two material powder injection molded components Part I Experimental investigationsJournal of Materials Science, 2003
- Sintering features of cemented carbides WC–Co processed from fine powdersInternational Journal of Refractory Metals and Hard Materials, 2001
- W content in Co binder during sintering of WC–CoActa Materialia, 1998
- Toxicity in Cemented Carbide Production1998