An Optimum Design Approach for Textured Thrust Bearing With Elliptical-Shape Dimples Using Computational Fluid Dynamics and Design of Experiments Including Cavitation
- 11 April 2017
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 139 (9) , 092502
Abstract
Textured thrust bearings are capable of providing higher load capacity and lower friction torque compared to nontextured bearings. However, most previous optimization efforts for texturing geometry were focused on rectangular dimples and employed Reynolds equation. Limited studies have been done to investigate the effects of partially textured thrust bearings with elliptical dimples. This study proposes a new optimization approach to find the optimal partially texture geometry with elliptical dimples, which maximize the loading capacity and minimize the friction torque. In this study, a 3D computational fluid dynamics (CFD) model for a parallel sector-pad thrust bearing is built using ANSYS cfx. Mass conserving cavitation model is used to simulate the cavitation regions. Energy equation for Newtonian flow is also solved. The results of the model are validated by the experimental data from the literature. Based on this model, the flow pattern and pressure distribution inside the dimples are analyzed. The geometry of elliptical dimple is parameterized and analyzed using design of experiments (DOE). The selected geometry parameters include the length of major and minor axes, dimple depth, radial and circumferential space between two dimples, and the radial and circumferential extend. A multi-objective optimization scheme is used to find the optimal texture structure with the load force and friction torque set as objective functions. The results show that the shape of dimples has a crucial effect on the performance of the textured thrust bearings. Searching the design space for a proper combination among the design variables satisfying the constraints has the advantage of capturing the codependence among design variables and leads to a surface patterning of the bearing, which showed a 42.7% improvement on the load capacity.Keywords
This publication has 19 references indexed in Scilit:
- Influence of surface texturing on the hydrodynamic performance of a thrust bearing operating in steady-state and transient lubrication regimeTribology International, 2016
- Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findingsTribology International, 2016
- A Numerical Study on the Influence of Hole Depth on the Static and Dynamic Performance of Hole-Pattern SealsJournal of Tribology, 2014
- An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configurationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2014
- Hole-Pattern Seals Performance Evaluation Using Computational Fluid Dynamics and Design of Experiment TechniquesJournal of Engineering for Gas Turbines and Power, 2014
- Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approachProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2010
- Analytical investigation of a partially textured parallel sliderProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2008
- Theoretical and experimental analysis of a partially textured thrust bearing with square dimplesProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2007
- Optimization of Partially Textured Parallel Thrust Bearings with Square-Shaped Micro-DimplesTribology Transactions, 2007
- The Effect of Periodic Textures on the Static Characteristics of Thrust BearingsJournal of Tribology, 2005