Characteristics and strength of hybrid friction stir welding and adhesive bonding lap joints for AA2024-T3 aluminium alloy
- 20 October 2020
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 98 (4) , 325-347
Abstract
A hybrid process combining friction stir welding with adhesive bonding is used to connect AA2024-T3 aluminum alloy. The epoxy ester adhesive was evenly smeared on the sheet surface prior to welding. Regarding the function of the adhesive in different regions at the lap interface, the lap interface can be divided into a completely FSW zone (CWZ), transition zone (TZ) and completely sealed zone (CSZ). During the tensile-shear test, the load is initially shared by the CWZ and TZ. With the increase of the external load the cracks first initiate at the adhesive layer, leading to the fast decrease of load–displacement curves. When the CWZ bears the load alone, the joint recovers the load-carrying capacity and the load–displacement curves increase again until the CWZ cracks and fractures. The crack propagation process of the hybrid joint mainly includes adhesive layer cracking stage and FSW interface cracking stage. The cracking load of the adhesive layer is higher than the elastic limit load of the conventional joint, and thus the adhesive does not influence the design load. The adhesive layer on the TZ reduces the stress and makes the stress distribution uniform, and on the CSZ can block the corrosion media.Keywords
This publication has 19 references indexed in Scilit:
- Crevice Corrosion Behaviors Between CFRP and Stainless Steel 316L for Automotive ApplicationsActa Metallurgica Sinica (English Letters), 2019
- Influence of Adhesive in FSW: Investigation on Fatigue Behavior of Welded, Weld-Bonded, and Adhesive-Bonded Joints in Aluminum AA 6082 T6Materials, 2019
- Refill friction stir spot welding of 7075-T6 aluminium alloy single-lap joints with polymer sealant interlayerComposite Structures, 2018
- Strength prediction of T-peel joints by a hybrid spot-welding/adhesive bonding techniqueThe Journal of Adhesion, 2016
- Aluminium Friction-stir Weld-bonded JointsThe Journal of Adhesion, 2015
- Effect of Pin Length on Hook Size and Joint Properties in Friction Stir Lap Welding of 7B04 Aluminum AlloyJournal of Materials Engineering and Performance, 2014
- Joining of metal to plastic using friction lap weldingMaterials & Design (1980-2015), 2014
- Mechanical behaviour of AA 2024 friction stir overlap weldsInternational Journal of Structural Integrity, 2013
- Friction stir welding and processingMaterials Science and Engineering: R: Reports, 2005
- Weld‐bonding: the best or worst of two processes?Industrial Robot: the international journal of robotics research and application, 2002