Design, Construction, and Operational Testing of Dry-Wound Conduction-Cooled React-and-Wind MgB$_{2}$ Magnet
- 21 April 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Abstract
This study details the design, construction, and operational testing of a dry-wound conduction-cooled react-and-wind MgB$_{2}$ magnet. A turn-coloring method was employed for the precise dry winding of round wire, ensuring the winding was completed as per design specifications. Mechanically and thermally stable copper ring-shaped current lead structures with solder-filled helical grooved path were developed for the reacted wire. Following the cryogen-free cooling setup, the magnet was charged, resulting in a quench event at a current lower than the designed operating level. Analysis suggests that an unexpected heat source within the coil winding, combined with the absence of a pre-load structure that resulted in insufficient conduction cooling paths, led to localized heat accumulation and a subsequent quench. These findings highlight the need for improvements in magnet design and manufacturing, particularly in incorporating a coil pre-load structure to enhance thermal management and ensure the long-term reliability of conduction-cooled MgB$_{2}$ magnets.Keywords
Funding Information
- National Research Foundation of Korea
- Ministry of Science and ICT, South Korea (2022M3I9A1073924)
- Applied Superconductivity Center, Electric Power Research Institute of Seoul National University
This publication has 18 references indexed in Scilit:
- World record 32.35 tesla direct-current magnetic field generated with an all-superconducting magnetSuperconductor Science and Technology, 2020
- Quench, normal zone propagation velocity, and the development of an active protection scheme for a conduction cooled, react-and-wind, MgB2 MRI coil segmentSuperconductor Science and Technology, 2019
- 45.5-tesla direct-current magnetic field generated with a high-temperature superconducting magnetNature, 2019
- Instrumentation, cooling, and initial testing of a large, conduction-cooled, react-and-wind MgB 2 coil segment for MRI applicationsSuperconductor Science and Technology, 2018
- 26 T 35 mm all-GdBa2Cu3O7–xmulti-width no-insulation superconducting magnetSuperconductor Science and Technology, 2016
- Design and Test of a Small React‐and‐Wind MgB2 Double PancakeIEEE Transactions on Applied Superconductivity, 2015
- Second Test Coil for the Development of a Compact 3 T $ \hbox{MgB}_{2}$ MagnetIEEE Transactions on Applied Superconductivity, 2012
- Test Coil for the Development of a Compact 3 T ${\rm MgB}_{2}$ MagnetIEEE Transactions on Applied Superconductivity, 2011
- Behavior of MgB2 React & Wind Coils Above 10 KIEEE Transactions on Applied Superconductivity, 2005
- Thermal Expansion1975