Determination of Trace Elements in Fluoropolymers after Microwave-Induced Combustion
- 21 November 2012
- journal article
- research article
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 85 (1) , 374-380
Abstract
An effective approach to the digestion of fluoropolymers for the determination of Ag, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, and Ni impurities has been developed using microwave-induced combustion (MIC) in closed quartz vessels pressurized with oxygen. Samples that were examined included the following: polytetrafluorethylene (PTFE); polytetrafluoroethylene with an additional modifier, perfluoropropylvinylether (PTFE-TFM); and fluorinated ethylene propylene (FEP). A quartz device was used as a sample holder, and the influence of the absorber solution was evaluated. Determination of trace elements was performed by inductively coupled plasma–optical emission and mass spectrometry. Neutron activation analysis (NAA) was used for validation purposes. Results were also compared to those obtained using microwave-assisted acid extraction in high-pressure closed systems. Dilute nitric acid (5 mol L–1), which was selected as the absorbing medium, was used to reflux the sample for 5 min after the combustion. Using these conditions, agreement for all analytes was better than 98% when compared to values determined by NAA. The residual carbon content in the digests was lower than 1%, illustrating the high efficiency of the method. Up to 8 samples could be digested within 30 min using MIC, providing a suitable throughput, taking into account the inertness of such samples.Keywords
This publication has 25 references indexed in Scilit:
- Slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry for the determination of Cr, Cd and Pb in plasticsAnalytical and Bioanalytical Chemistry, 2006
- Direct multi-element analysis of a fluorocarbon polymer via solid sampling-electrothermal vaporization-inductively coupled plasma mass spectrometryJournal of Analytical Atomic Spectrometry, 2006
- Laser ablation–inductively coupled plasma–dynamic reaction cell–mass spectrometry for the multi-element analysis of polymersSpectrochimica Acta Part B: Atomic Spectroscopy, 2005
- Fluoropolymer Fibres: Physicochemical Nature and Structural Dependence of their Unique Properties, Fabrication, and Use. A ReviewFibre Chemistry, 2004
- Simultaneous determination of Co, Mn, P and Ti in PET samples by solid sampling electrothermal vaporization ICP-MSJournal of Analytical Atomic Spectrometry, 2000
- Determination of ultratrace metallic impurities in fluorocarbon polymers by electrothermal atomic absorption spectrometry after decomposition with a combustion systemAnalytica Chimica Acta, 1996
- High purity fluoropolymer materials: Trace element content and leachingJournal of Crystal Growth, 1988
- Causes and elimination of systematic errors in the determination of iron and cobalt in aqueous solutions in the ng/ml and pg/ml rangeTalanta, 1982
- Removal of trace elemental impurities from polyethylene by nitric acidAnalytical Chemistry, 1975
- On the Determination of Inorganic Elements in Polypropylene PolymersThe Journal of the Society of Chemical Industry, Japan, 1962