Analysis of Sintering Curves, Microstructure, and Microhardness of the Cu-WC Composite
Open Access
- 1 January 2025
- journal article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1)
Abstract
Composite materials have gained prominence due to their tailored properties for various applications. Cu-WC composites, combining a copper matrix with tungsten carbide reinforcement, are particularly valuable for electrical conductors and heat sinks. This study examined the sintering behavior of Cu-WC composite powder (10%WC) produced via High-Energy Ball Milling (HEBM) at 400 RPM for 2, 10, and 20 hours. The powders were compacted at 150 MPa and sintered at 900°C with a 1-hour isothermal hold. Sintering curves, microstructure, and Vickers microhardness were analyzed. The results showed that longer milling times led to significant powder expansion up to 750°C, followed by greater shrinkage due to diffusion mechanisms. Sintered samples milled for 10 hours displayed improved carbide distribution in the copper matrix. The highest microhardness was achieved at 20 hours of milling, attributed to refined microstructure. Extended milling times enhanced atomic diffusion during sintering, resulting in a more homogeneous structure and increased hardness.Keywords
This publication has 39 references indexed in Scilit:
- Investigation of the effect of sintering process parameters on the corrosion, wear and hardness of W–Cu compositeSādhanā, 2024
- High‐Strength Wear‐Resistant Cu/Tungsten Carbide/Diamond Composites Fabricated by Powder MetallurgyAdvanced Engineering Materials, 2024
- Microstructure and mechanical properties of WC–TiC–Co cemented carbides produced by spark plasma sintering (SPS) methodSN Applied Sciences, 2023
- Influence of sintering time on microstructure and properties of hot oscillatory pressing sintered W–Cu refractory alloysTungsten, 2023
- Well-Dispersion of Nanoscale WC Particles in WC–Cu Composites Prepared by Molecular Level Mixing and Spark Plasma SinteringPowder Metallurgy and Metal Ceramics, 2022
- Correction to: A Comparative Study of Mechanical Properties, Thermal Conductivity, Residual Stresses, and Wear Resistance of Aluminum-Alumina Composites Obtained by Squeeze Casting and Powder MetallurgyMetallurgical and Materials Transactions A, 2021
- Impact of the SiC addition on the morphological, structural and mechanical properties of Cu-SiC composite powders prepared by high energy millingAdvanced Powder Technology, 2021
- Reinforcements, Manufacturing Techniques, and Respective Property Changes of Al2O3/SiC Based Composites: A ReviewSilicon, 2021
- An experimental analysis of tensile, hardness and wear properties of aluminium metal matrix composite through stir casting processSN Applied Sciences, 2020
- X-ray line broadening from filed aluminium and wolframActa Metallurgica, 1953