Real-Time Air Gap and Thickness Measurement of Continuous Caster Mold Flux by Extrinsic Fabry–Perot Interferometer
- 20 October 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-14
Abstract
Mold Flux plays a critical role in continuous casting of steel. Along with many other functions, the mold flux in the gap between the solidifying steel shell and the mold serves as a medium for controlling heat transfer and as a barrier to prevent shell sticking to the mold. This manuscript introduces a novel method of monitoring the structural features of a mold flux film in real-time in a simulated mold gap. A 3-part stainless-steel mold was designed with a 2 mm, 4 mm and, 6 mm step profile to contain mold flux films of varying thickness. An Extrinsic Fabry-Perot Interferometer (EFPI) was installed at each of the three steps in the mold. Mold flux was melted in a graphite crucible at 1400 °C and poured into the instrumented step mold for analysis. Interferograms from the three EFPIs were acquired and processed in real-time to measure the air gap and thickness of each flux film during solidification. Measurements were performed on two different mold flux compositions. Results demonstrate that the proposed system successfully records structural features of the flux film in real-time during cooling. It has a large real-time impact on the process control of steel making and optimizing the quality of steel castings. In addition, the measurement method has potential to monitor crystal nucleation and growth in a variety of crystallizing glass systems.Keywords
Funding Information
- DLA-Troop Support, Philadelphia, PA, USA
- Defense Logistics Agency Information Operations, J68, Research and Development, Ft. Belvoir, VA, USA
- Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) through the Advanced Manufacturing Office (DE-EE0009119)
- Peaslee Steel Manufacturing Research Center (PSMRC), Missouri University of Science and Technology, Rolla, MO, USA
This publication has 43 references indexed in Scilit:
- Measurements and modeling of air gap formation in iron-base alloysMaterials Science and Engineering: A, 2005
- Mould FluxesHigh Temperature Materials and Processes, 2003
- Single-crystal sapphire fiber-based strain sensor for high-temperature applicationsJournal of Lightwave Technology, 2003
- A Mathematical Model for Prediction of Thickness of Mould Flux Film in Continuous Casting Mould.ISIJ International, 2002
- Optical fiber sensor-based detection of partial discharges in power transformersOptics & Laser Technology, 2001
- Brillouin optical-fiber frequency-domain analysis for distributed temperature and strain measurementsJournal of Lightwave Technology, 1997
- Heat Transfer between Mold and Strand through Mold Flux Film in Continuous Casting of Steel.ISIJ International, 1993
- Design and Properties of Glass-CeramicsAnnual Review of Materials Science, 1992
- Crystallization of a Glass‐Ceramic by Epitaxial GrowthJournal of the American Ceramic Society, 1984
- An instrumentation scheme for multipoint measurement of mould-metal gap in an ingot casting systemInternational Journal of Heat and Mass Transfer, 1981