AHAbhishek Prakash Hungund

Abhishek Prakash Hungund

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abhishek Prakash Hungund has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Pendant Micro-droplet Evaporation Fabricates Fiber-optic MOF Gas Sensor in Seconds

    by Abhishek Prakash Hungund, Bohong Zhang, Narasimman Subramaniyam, Thomas Spudich, Ryan O’mAlley, Farhan Mumtaz, Rex E. Gerald, Jie Huang

    The development of photonic-based gas sensors using metal-organic frameworks (MOFs) and other microporous solids is often a multistep, complex process, typically involving MOF synthesis, purification, and attachment of microcrystals to an optical fiber end face. This study introduces a one-step method that integrates MOF synthesis and sensor head fabrication directly onto the fiber end face, forming an extrinsic Fabry-Perot interferometer (EFPI) with a thin film of MOF microcrystals. The resulting film, only 3-10-μm-thick, enhances sensor response by enabling rapid gas detection within seconds. Utilizing a pendant micro-droplet evaporation technique, this method forms a microporous MOF layer in situ, allowing unreacted molecular components to act as an adhesive that secures the MOF crystallites to the optical fiber, potentially also contributing to the film's adsorption properties. This process, demonstrated with the HKUST-1 MOF as a model system, optimizes both the fabrication speed and sensor response times by reducing the film formation process to 24 s under nitrogen and 90 s in ambient conditions. In situ Raman spectroscopy, X-ray diffraction (XRD), thermogravimetry (TGA), and energy dispersive X-ray spectroscopy (EDS) were used to validate the composition of the sensor head, confirming the presence of MOF crystallites as the primary sensing component within the EFPI film and characterizing additional film components that may enhance stability, selectivity, and response. This bottom-up approach holds significant promise for the scalable production of fiber-optic sensors that leverage MOF's gas adsorption properties.


  • Open Access

    Advancing Aluminum Casting Optimization With Real-Time Temperature and Gap Measurements Using Optical Fiber Sensors at the Metal-Mold Interface

    by Bohong Zhang, Abhishek Prakash Hungund, Dinesh Reddy Alla, Deva Prasaad Neelakandan, Muhammad Roman, Ronald J. O’mAlley, Laura Bartlett, Rex E. Gerald, Jie Huang

    Accurate measurement of interfacial heat transfer during casting solidification is crucial for optimizing metal solidification processes. The gap between the mold wall and casting surface plays a significant role in heat transfer and cooling rates. In this study, two innovative fiber-optic sensors are employed to measure real-time mold gaps and thermal profiles during the solidification of A356 aluminum in a permanent mold casting. The experimental setup consists of a specially designed mold system made of unheated, uncoated tool steel, which facilitates easy installation of the fiber-optic sensors. An Extrinsic Fabry-Perot interferometric (EFPI) sensor is utilized to monitor the evolving gap between the mold wall and casting surface. This method relies on the unique concept of using molten metal as the second reflection interface for gap measurements. The EFPI gap measurements exhibit high accuracy and precision, with a maximum error of only 2 μm when compared to physical measurements. Simultaneously, a stainless steel-encased fiber utilizing the Rayleigh backscattering (RBS) technique is deployed across the mold wall and cavity to achieve real-time temperature measurements with a spatial resolution of 0.65 mm. The study demonstrates that leveraging high-resolution temperature profiles and gap evolution measurements enhances understanding of heat transfer dynamics at the mold-metal interface, particularly valuable for complex-shaped castings and continuously cast metals. Additionally, the ability to measure the cast shape exiting a continuous casting mold during operation presents a novel tool for real-time product quality monitoring and process safety enhancement by detecting conditions that may lead to slab cracking and breakouts.


  • Real-Time Air Gap and Thickness Measurement of Continuous Caster Mold Flux by Extrinsic Fabry–Perot Interferometer

    by Abhishek Prakash Hungund, Hanok Tekle, Bohong Zhang, Ronald J. O'MAlley, Jeffrey D. Smith, Rex E. Gerald, Jie Huang

    Mold Flux plays a critical role in continuous casting of steel. Along with many other functions, the mold flux in the gap between the solidifying steel shell and the mold serves as a medium for controlling heat transfer and as a barrier to prevent shell sticking to the mold. This manuscript introduces a novel method of monitoring the structural features of a mold flux film in real-time in a simulated mold gap. A 3-part stainless-steel mold was designed with a 2 mm, 4 mm and, 6 mm step profile to contain mold flux films of varying thickness. An Extrinsic Fabry-Perot Interferometer (EFPI) was installed at each of the three steps in the mold. Mold flux was melted in a graphite crucible at 1400 °C and poured into the instrumented step mold for analysis. Interferograms from the three EFPIs were acquired and processed in real-time to measure the air gap and thickness of each flux film during solidification. Measurements were performed on two different mold flux compositions. Results demonstrate that the proposed system successfully records structural features of the flux film in real-time during cooling. It has a large real-time impact on the process control of steel making and optimizing the quality of steel castings. In addition, the measurement method has potential to monitor crystal nucleation and growth in a variety of crystallizing glass systems.


  • Open Access

    Chemical Classification by Monitoring Liquid Evaporation Using Extrinsic Fabry-Perot Interferometer With Microwave Photonics

    by Abhishek Prakash Hungund, Bohong Zhang, Anand Nambisan, Wassana Naku, Rex E. Gerald, Jie Huang

    Identification of liquids is essential in chemical analysis, safety, environmental protection, quality control, and research. A novel liquid identification system based on Microwave Photonics (MWP) measured time transient evaporation signals is investigated. An extrinsic Fabry-Perot Interferometer (EFPI) based optical probe using single-mode fiber (SMF) is proposed to monitor evaporation of different liquids. The MWP system is used to measure the optical path changes during liquid evaporation due to its high sensitivity, selectivity, and Signal-to-Noise Ratio (SNR). The measured S21 continuous wave (CW) time Magnitude and Phase signals were processed to extract features such as histogram and Fast Fourier Transform (FFT) peaks. Using features extracted from droplet evaporation time transient events, machine learning classification accurately identified chemicals in each liquid with an accuracy rate of over 99%, employing three algorithms: Decision Trees, Support Vector Machine (SVM), and K-nearest neighbors (KNN). The classification results demonstrate accurate liquid identification based on evaporation measurements by the MWP system.