A 60-V Chopper Amplifier Achieving 0.12- μ V Ripple and 2- μ V V OS Over Full Temperature With Calibration
- 10 February 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 73 (4) , 368-372
Abstract
This brief presents a 60 V chopper-stabilized operational amplifier (opamp) with an 8 MHz gain-bandwidth product (GBW) and precision calibration. A novel high-voltage adaptive clock-bootstrap technique is proposed, compensates for temperature variations of the threshold voltage, and maintains a constant overdrive voltage. The opamp integrates a $500\times $ gain module to amplify and calibrate the non-chopped offset voltage, thereby reducing output ripple. It adopts a calibration scheme with temperature-compensated bit weights which are proportional to the transconductance of the chopper-path input transistor pair. Fabricated in a 0.18- $\mu $ m Bipolar-CMOS-DMOS process, the amplifier employs input-referred offset and ripple minimization techniques while ensuring consistent performance over a wide input common-mode voltage range and temperature span, achieving a 3- $\sigma $ offset voltage of $2~\mu $ V across 100 samples (- $40~^{\circ }$ C to $125~^{\circ }$ C), an offset drift of 7 nV/°C, and a maximum input-referred ripple of $0.12~\mu $ VRMS(Root Mean Square).
Keywords
Funding Information
- Tianjin Municipal Science and Technology Bureau (21JCZDJC00380)
This publication has 17 references indexed in Scilit:
- 3.2 A 36V Current-Balancing Instrumentation Amplifier with ±24V Input Range, 5.6MHz BW, and 140dB CMRR at All Gain Settings2025
- A 36V 48MHz JFET-Input Bipolar Operational Amplifier with 150µV Maximum Offset and Overload Supply Current Control2018
- A 5.6 nV/ $\surd $ Hz Chopper Operational Amplifier Achieving a 0.5 $\mu$ V Maximum Offset Over Rail-to-Rail Input Range With Adaptive Clock Boosting TechniqueIEEE Journal of Solid-State Circuits, 2016
- A 60 V Auto-Zero and Chopper Operational Amplifier With 800 kHz Interleaved Clocks and Input Bias Current TrimmingIEEE Journal of Solid-State Circuits, 2015
- A 60V capacitive gain 27nV/√Hz 137dB CMRR PGA with ±10V inputs2012
- A 21 nV/$\surd$Hz Chopper-Stabilized Multi-Path Current-Feedback Instrumentation Amplifier With 2 $\mu$V OffsetIEEE Journal of Solid-State Circuits, 2011
- A Single-Temperature Trimming Technique for MOS-Input Operational Amplifiers Achieving 0.33 $\mu$V/$^{\circ}$C Offset DriftIEEE Journal of Solid-State Circuits, 2011
- A 1.8 $\mu$W 60 nV$/\surd$Hz Capacitively-Coupled Chopper Instrumentation Amplifier in 65 nm CMOS for Wireless Sensor NodesIEEE Journal of Solid-State Circuits, 2011
- A 36V JFET-input bipolar operational amplifier with 1μV/°C maximum offset drift and −126dB total harmonic distortion2011
- Dynamic Offset Compensated CMOS Amplifiers2009