Durability enhancement in aged composite pipes: Low-velocity impact performance of basalt fiber reinforced polymer modified by graphene nanoplatelets
- 21 November 2025
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 60 (23) , 2165-2180
Abstract
Composite pipes, widely employed in the transport of natural gas, petroleum, and chemical fluids, are often exposed to low-velocity impact loads compromising structural integrity. Such impacts, coupled with prolonged exposure to environmental factors like water and elevated temperatures, accelerate material degradation. This study aims to evaluate the effectiveness of graphene nanoplatelets (GnPs) in enhancing the impact resistance and long-term durability of basalt fiber reinforced polymer (BFRP) composite pipes under hydrothermal aging conditions. Neat and 0.25 wt.% GnPs reinforced BFRP composite pipes were fabricated via filament winding with a ±55° winding angle. The pipes were hydrothermally aged in water at 80°C for 15, 30, 45, and 60 days, followed by low-velocity impact tests at 20 and 40 J. The results revealed that increasing the energy from 20 to 40 J led to an increase in the maximum contact force by approximately 22% in neat samples and about 35% in GnPs reinforced samples, reflecting the enhanced rigidity and impact resistance provided by GnPs. Hydrothermal aging reduced the maximum contact force in all samples, with the most pronounced reduction after 60 days: neat samples decreased by approximately 57%, whereas GnPs reinforced samples about 21% at 40 J. These results indicate that GnPs mitigate aging-induced loss in impact performance by limiting rigidity reduction and damage propagation. Damage analysis further confirms the beneficial role of GnPs in preserving structural integrity under long-term aging. Overall, these findings highlight the potential of GnPs reinforced BFRP pipes for enhanced durability and impact resistance in industrial applications.Keywords
This publication has 67 references indexed in Scilit:
- Effect of Hybridization on the Dynamic Characteristics of Carbon/Basalt Fiber‐Reinforced Polymer Composites Exposed to Repeated Low‐Velocity ImpactJournal of Applied Polymer Science, 2025
- Impact response of hybrid composites under varying environmental conditions: A comparative studyPolymer Composites, 2024
- Failure analysis of glass fiber and basalt fiber reinforced polymer composites under an extreme environment with high‐temperature , high‐pressure and H2S / CO2 exposurePolymer Composites, 2024
- Mechanical behavior of the polyamide 6.6 nanofiber and MWCNT‐reinforced hybrid nanocompositesPolymer Composites, 2024
- An experimental study on the hydrothermal aging effect on the free vibration properties of hybrid aramid/glass/epoxy composites: Comparison of sea water and distilled waterPolymer Composites, 2023
- A study on graphene reinforced carbon fiber epoxy composites: Investigation of electrical, flexural, and dynamic mechanical propertiesPolymer Composites, 2022
- Evaluation of the hydrothermal aging effect on the buckling behavior of hybrid glass/aramid/epoxy composite plates: Comparison of distilled water and seawaterPolymer Composites, 2022
- Effect of repeated hydrothermal cycling on the durability of glass fiber/epoxy composites with and without carbon nanotube reinforcementPolymer Composites, 2021
- Experimental study on the effect of graphene nanoplatelets on the low‐velocity impact response of prestressed filament wound basalt‐based composite pressure vesselsPolymer Composites, 2021
- Low‐velocity impact behavior of glass fiber‐MWCNT/polymer laminates exposed to seawater and distilled water agingPolymer Composites, 2020