Delamination and thrust force analysis in GLARE: Influence of tool geometry and prediction with machine learning models
- 12 December 2024
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 59 (10) , 1233-1249
Abstract
The multi-layered (fiber/metal) structure of glass fibre aluminium reinforced epoxy (GLARE) makes it difficult to obtain acceptable damage-free holes that meet aerospace standards. This paper investigated the effects of tool geometry and drilling parameters on reducing delamination damage and uncut fibers at the hole exit surface in drilling GLARE. The hole surfaces were examined by scanning electron microscope (SEM) at various magnifications. In addition, deep neural network (DNN) and long-short-term memory (LSTM) machine learning models were used to predict delamination (F da ), uncut fiber (UCF), and thrust forces using experimental data. No positive contribution of the special geometry tool was observed, while the standard geometry tool was found to be ideal for drilling conditions. Analysis of variance (ANOVA) revealed that feed rate contributed 57.83% to delamination damage, while tool geometry contributed 74.31% and 92.33% for uncut fiber and thrust force, respectively. SEM analysis revealed high deformation zones in the aluminum layers and fiber fracture and separation in the glass fibre reinforced polymer (GFRP) layers. DNN and LSTM models were found to provide accurate predictions with R 2 values greater than 95% and 98%, respectively.Keywords
This publication has 35 references indexed in Scilit:
- Integrating response surface methodology and machine learning for analyzing the unconventional machining properties of hybrid fiber‐reinforced compositesPolymer Composites, 2024
- Machine-learning based process monitoring for automated composites manufacturingJournal of Intelligent Manufacturing, 2023
- Machining GLARE fibre metal laminates: a comparative study on drilling effect between conventional and ultrasonic-assisted drillingThe International Journal of Advanced Manufacturing Technology, 2022
- Drilling of glare laminates: effect of cutting parameters on process forces and temperaturesThe International Journal of Advanced Manufacturing Technology, 2022
- Machine Learning-Based Erosion Behavior of Silicon Carbide Reinforced Polymer CompositesSilicon, 2020
- An investigation of drilling high-strength CFRP composites using specialized drillsThe International Journal of Advanced Manufacturing Technology, 2019
- Optimization of facing process by indigenously developed force dynamometerThe International Journal of Advanced Manufacturing Technology, 2018
- Investigation into the Fiber Orientation Effect on the Formability of GLARE Materials in the Stamp Forming ProcessApplied Composite Materials, 2017
- 3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality AnalysisApplied Composite Materials, 2016
- The mechanical behavior of GLARE laminates for aircraft structuresJOM, 2005